Progress is not on the spot, and every time we hear about something new in a variety of areas and sectors. Relatively recently, a new type of finishing coating for walls - glass coolers appeared on the market. This type of coating is usually called a cob, because of its appearance.
The greasy glassball is used in the reinforcement of surfaces in front of finishing works. This material is not a finish-type coating, this is, so to speak, for the further decoration of the walls and the ceiling. A web can be called an effective assistant in the fight against such serious problems, like cracks on the surface of the ceilings and walls.
Frequently, the problems of cracks arise in new homes that were built relatively recently, because over time there is a shrinkage of the house, the painting glass cobweb is applied to the use of which is appropriate in this case, is the best assistant in the current situation.
It should also be noted that this type of finishing coating for walls today is becoming its popularity in the market of finishing materials, and with quite serious turns. The considered type of "preparatory wallpapers" has similarities and differences. We will also compare the process of manufacturing paper and glass cholester.
Specifications and scope of material
It consists of a greasy glassball from fiberglass threads, like glassy, \u200b\u200bbut the difference is that the web is made not on the machines. The process of manufacturing the "wallpaper under consideration" is as follows: fiberglass falls under the press, as in the process of making sheets of paper. The result of such a press is smooth, thin sheets whose surface is very smooth. The density of the compressed fiberglass is 25-50 g / m 2.
Although the process of manufacturing the coat glass and paper and paper is similar to some extent, the difference between them is colossal - unlike paper sheets, the electricity of the statistical type does not accumulate on its surface, it is also not terrible or water, no damage to the mechanical type, nor chemical reagents. Dust on them is also not attracted and, to all, they do not burn. Some difficult to imagine how such a finishing material looks like, therefore, the video on which the method of applying a painting glass will be shown, you can view this article.
It includes their composition, namely, the ingredients included in its composition are extremely natural, as in paper, are also non-allergenic material, the air is missed perfectly. The difference between glass choles and glasskeepers lies in the absence of a drawing of a wicker and relief on the surface of the first. But here, too, have its advantages, if there are no released elements on the surface, it means that they can be painted an unlimited number of times, there is no relief - there are no problems.
How to glue a greasy glass
In order to stick the material on the wall or ceiling, you do not need to have some special skills and knowledge. It is worth just to find out how it is done, and start work. If you do not want to pay huge money to the masters for a fairly simple finish process, then just follow the items of recommendations that will help you perform everything right and quickly.
How to glue a glass cooler tinting with a putty on plasterboard video
- To begin with, glue is applied to the surface of the ceiling or walls, it is not necessary to apply a lot, it will be enough to apply glue in one strip. The substance is absorbed quite quickly, so you drive it out of under the finishing material - it is not necessary.
- There are no bandwidth standards, you can cut them as you wish, most importantly, to work comfortably with them. With the finishing of the walls, everything will be simpler, so you can cut off the band for the whole length, but the band will have enough strip on one and a half - two meters. Before sticking, check where the facial and theth sides. It is very similar to them, but there is a difference in them, so you will find all the necessary information about this on the label.
- Malyary glass coat of web: the use of which is appropriate for all surfaces in the room, and even for drywall structures, after adjusting to the wall, smoothed neatly by hand. It is necessary to ensure that the angle of the room coincides with the edge of the cage. After that, it is necessary to carry out a spatula on the surface so that the air does not remain under the coating.
- When the leaf on the wall is firmly attached, you can proceed to circumcision all extra, which sticks out or hanging. After that lubricate the glue surface again. To understand that the leaf is impregnated well, it should become dark from moisture.
- The next sheet, the same size as the previous one, glue on the wall, necessarily a mustache. If the mixing of the material is made on the ceiling, then it is better to glue along the room.
1m2 glue consumption
The question of the consumption of glue in the event of decoration of walls or ceiling by painting glass, it occurs quite often, because it will require a lot for such a process. The fact is that there are no standards on this. It is impossible to accurately calculate the amount of glue, which will leave the square surface to the meter, because it will depend on the one who will apply this glue to the surface.
If the glue is not enough, you will see it yourself, a lot - also not to notice it is difficult. To make the surface of the glue surface, you must follow the color of the coat glass glass, as soon as it darkens from moisture, it means a sufficient amount on its surface.
- After we glued the second sheet of the bracket, we impregnate it with a layer of glue and is mandatory well pressed against the wall. So that the seams between the sheets were invisible, it is necessary to cut through the strip through both pasted layers, even if your slot turns out to be uneven, there is nothing terrible in this, we strive for the surface to be smooth, and these irregularities of the strip cut through you will not be visible on Wall or ceiling.
- After 24 hours, the adhesive on the surface will dry finally, and it will be possible to start the next stage of the finish.
Malyary glass cobweb web Application: how to paint
If you decide to paint the cloth, then we recommend using for such a water-based paint surface. Such a paint retain the properties of the finishing material itself and besides, it can be smooth a smooth layer for more paint.
Using painting glass, how to put video
For painting, you need the following tools:
- bath, where paint will be poured;
- roller, (you can use painted brush, but then the painting process is spread for a long time).
Painting a glass cooler Customer is necessary two times, that is, to apply two layers of paint. It is worth noting that the time between the application of the layer should be at least 12 hours. To carry a rolling of the seam, you must use the "wing", if you do it with a roller - the result will not be optimal. In principle, this is all the features of painting such a finishing material.
Do you need to put a greasy glass cooler before painting
The positive quality of the web is that after sticking it to the wall, you can immediately start painting the surface of the walls or the ceiling. In this case, the word immediately means. After the surface is completely dry, simply without preliminary and preparatory work.
Glass-coolant web application on the ceiling video
It is necessary to put it only if you want to have a completely smooth surface of a wall or ceiling or want to hide the texture of finishing material, in this case, the web.
The optimal option for preparatory work before sticking will be primer with glue glass cholester, thereby reducing paint consumption. It is correct and profitable, the glue is much cheaper than paint.
Is it possible to glue the wallpaper on the glass chop
I would like to begin to say that the painting glass is the material that serves to reinforce the surfaces, and it is glued to fix the plaster, putty, as well as to avoid the appearance of cracks on the walls. This material is perfect for painting.
As for the wallpaper, in the case of glass christmas, it is possible to produce them, but before this you have to treat the surface of the wall or ceiling, and only then begin to bust the wallpaper on the surface.
Since the painting glass cobweb is used by the use of cracks, it is not an finishing coating, it can be both painted and glued on top of the wallpaper, but after overcoming the surface.
If the process of sticking seems to be difficult to you, and to some extent incomprehensible, then we recommend that you view the video on our website, where it is described in detail and shown how to properly glue the glassball tinting on various surfaces.
