Laying of porcelain is the process of painstaking, requiring enough time and strength. You can get a bizarre mosaic on the surface after a few hours of operation. However, that the material quickly crashed and was not particularly vulnerable to external damage, it is necessary to lay it "with a sense, with a sense, with the arrangement," working is not on the result, but on quality. Regardless of how much time it is required for the entire process.

Start of work: laying of porcelain stoneware

Laying of porcelain stoneware is always carried out under the same technology. The difference is only the desired result. The same tile can be laid completely differently. And such a metamorphosis simply cannot but rejoice.


Getting Started, the master or customer must decide for itself the following questions:

  • Select the optimal color of the material;
  • Spend your favorite drawing;
  • Make a sketch of future coverage;
  • Understand whether the selected concept is combined with the current or future design of the house.

It often happens that the customer's desires do not match the possibilities of the room or the interior solution of the house. It is not necessary to stubborn here, and it is worth choosing exactly what the best will fit into the interior.

According to statistics, the porcelain stoneware serves up to 10 years (it is precisely such data that manufacturers declare, but it is possible that it will last an order of magnitude longer) and can survive any repair.

Therefore, it will be much better to choose a neutral material in a classic design, which even with a modern interior will look very stylish. Otherwise, together with each new repair will have to change and floor covering. And this, in turn, bears additional considerable costs.

Aza: Technology laying a porcelain stoneware on the floor

Technology performing work involves two ways to lay a porcelain stoneware.

Namely to be done:

  • In the standard way;
  • Job.


The first method has long been well known to the masters, so no questions cause any questions. All you need to be patient and high-quality tool. Everything else is a matter of technology. Place the plates in this way on average on the area of \u200b\u200bthe room will be able to be very quickly, which simply cannot but rejoice.

Before starting work, the following points should be approved and clarified:

  • Type of inflicted drawing;
  • Method of performing laying;
  • Installation plan;
  • The thickness of the imposed adhesive composition.

If it is decided to lay the jack tile, you need to prepare the plates of the same size in advance: otherwise they simply do not fit together.

But despite such a nuance, the technology allows you to get a perfectly smooth surface without significant financial investments. However, in order to achieve an ideal result, you will have to work pretty.

Beginning should be started after the tile is cleaned from the protective layer, which manufacturers are covered. This can be done with the help of special cleaning products or hot water, under the influence of which paraffin bounces almost instantly.

Features: Laying porcelain stoneware on a warm floor

The warm floor has gained its popularity relatively recently, but more and more people choose it for her home.


To put the cerarmogrant on it quite real, but it is important here to take into account several basic rules:

  • Between the materials should be a protective layer;
  • Mandatory condition is a fireproof layer;
  • The screed over the warm floor is not carried out.

In fact, the warm floor is placed in a special box made of metal profile. Due to this, the surface rises slightly, but this feature does not affect households. Especially good to do it in homes with high ceilings.

The complexity lies in the fact that the porcelain stoneware is stacked very tightly and, if necessary, simply to remove it, and then put in place again not submitted.

The masonry is removed without the possibility of return, because, in the process of work, it simply deforms! Therefore, if the warm floor will fail, the base will have to launch re-acquiring new components. And this, in turn, entails very significant waste, because the device of the new flooring from porcelain stoneware - the procedure is not cheaper.

Rules for laying a porcelain stoneware on the floor

It is not difficult to put porcelain stoneware with your own hands, if the wizard performed certain rules. Without them, put the material, of course, really, but the guarantee that it will be operated for a very long time, no one will give.


All, without exception, laying methods suggest that:

  • Put the material need to be perfectly smooth concrete base;
  • Cement mortar dry well;
  • After the completion of the work, the seams and cladding should be carried out in obligatory;
  • Drying time - up to several days, depending on the weather outside the window.

Proper laying of porcelain stoneware (video)

Porcelain stoneware is stacked on the street and in the house. This material is unpretentious in caring, durable and very easy to operate. However, in order to properly put it, a certain spectrum of skills will be required. You can get them anyone who is really interested in maximizing their home. If you can, it is possible to get additional knowledge from thematic video lessons, which will not be much difficult.

ATTENTION, only today!