How to lay a laminate with your own hands?

What will happen if such a coating is stacked with violation of technology? How to lay a laminate yourself with your own hands? At first you will not notice anything. The coating regularly serves, without any complaints. Everything is beautiful, cozy and joyful. But gradually he will start trying. Sustilly, as if complaining, that they constantly go on it. Over time, the creaking will increase and starts pretty well. Then between the boards will be barely noticeable. If the base of the floor is uneven, they will increase in size and spoil the appearance of the finishing material. And then it will be worse ...

The laminated floor in recent decades has become a very popular coating. This is explained by many advantages. First of all, the price component: the laminate can be bought for almost any wallet price, which is often the main factor for the consumer. Now the main thing is how to lay a laminate with your own hands, firstly you and the funds will save, and always when you do something, you take into account more nuances.

This floor cover looks very pretty. Now you can pick up for the interior of your home any option. Laying the laminate independently is not only a way to show their talents, but also to save a family budget for a decent amount. If you wanted to put the laminate with your own hands, then you need to take into account one of its advantages is a comparative simplicity of installation.

Finally, the locks that fasten the panels with each other will fail. Some boards will begin stand out on a general background of the floor covering and make even greater disharmony. At this moment you remember how good there was a simple linoleum, adorning your floor before. And you will not right. Laminate is a wonderful flooring. Just get it necessary for all the rules. If you come across, you will be easier. Here we will talk about this today.

How to lay Laminate yourself?

Start with the preparation of the base! From his quality they envy how long the coating will last you. The difference can fluctuate in the range from 2 to 15 years. It is worth nothing anywhere and to pay a week to prepare the foundation. It stacked on a flat surface. Differs are permissible, but very small. Invisible human eye. If you see any pits or tubercles, then it is necessary to get rid of them. You can achieve this in three ways:

Spindle the mixture on the floor surface.
Organize cement - sand tie.
Align the floor with plywood sheets.

To speed up the floor to update the floor, in parallel with this you can engage in the purchase of finishing material. This material is sold in construction stores, markets and supermarkets. We advise you to acquire a coating in large specialized departments. There you can get more favorable conditions for the purchase, including discounts and free shipping.

After the material turns out to be at your homes, it would be necessary to lay a laminate with your own hands, you need to free all the packs of plastic film and carefully inspect each board. They should not have chips and crumpled castles. Shades in all boxes should coincide, as well as face drawing. Spread the boards so that they do not bend and have not experienced external load. While you align the floor, laminate is acclimatized to new temperature conditions.

Before we figure out how to lay down, let's consider the process of laying the substrate. Her presence is necessarily, because it protects the coating from direct contact with the base and makes walking along the laminate more comfortable.

There is a rolled and sheet substrate. Rolled sharpening is easier, since she has less junctions. The sheet substrate consists of more elements that need to be combined with each other. In both cases, fasteners are performed using a tape. They grab two neighboring stripes at once. Pick up a wide ribbon enough to come to each side, at least 3 centimeters.

Laying the substrate does not take away a lot of time, as this is a pretty simple preparatory operation. You will need to highlight much more time on the laminate flooring. Work is best started in the first half of the day with good natural light.

Here are important rules that need to adhere to :

Wine laminate in the direction of light, so longitudinal junctions between the boards will be less damage.
Leave the temperature gaps around the perimeter of the room. The optimal gap between the walls and boards is about 10 mm.
Place the plates in a checker order in relation to each other. Thus, the joints are partially overlapped with solid boards and the connection is obtained more beautiful and high-quality.
To save material and achieve proper dressing, each second longitudinal row start with a trimming (trimmed plate).
After installing each board, make sure that it is tightly adjacent to neighboring elements. Later it will be almost impossible to correct the detected defect.
Do not knock the plates with a hammer. It can injure delicate coating. Use a wooden bar as a bad person. It will remain possible dents, while the boards will remain without damage.

Use the instruction

So, how to lay a laminate with your own hands. Before you begin to work, you need to know that the laminate is bought with some reserve (for the case of damage to laminate boards, especially in the absence of a certain experience of newbies). Before starting work, take the most necessary and simple things, without which you can not do: a jigsaw, a hammer, a roulette, a pencil, a wooden plank 15-25 cm, a substrate.
Before working with laminate, it is necessary to align the floor well, clean it well from crumbs, construction waste and dust. If the surface is made of wood, then you need to check whether there are no failures in some places, whether it will not creak. Available defects should be immediately eliminated that after there were no problems. If the floor is concrete, then it is necessary to inspect it on
With proper preparation, the foundation can be confident that it turns out a great result. The curvature of the surface should not be more than 3 mm per meter. After alignment of the floor, you need to lay a substrate. The substrate has several main properties - thermal insulation, depreciation, sound absorption, waterproofing. Another substrate hides small irregularities. It must be ripe on the floor of the floor, but not immediately all over the area of \u200b\u200bthe room, but directly under the laminated laminate stripes. Excess the substrate must
At first glance, laminate laying seems to be completely elementary and fast. But it is not. Laminated boards are connected to each other: the comb of each plate robbed into the groove of the previous board. Next, laminate boards are finally fixed with each other with a rubber hammer. You can start laying laminate boards from different sides of the room. But it is believed that it is best to put along the window - so the gaps between the boards are not very noticeable. This is how all the boards are laid out and customized. The latter should be cut off to the required value.
One strip is ready. Strong it to the wall and around the wedge (you can take previously cut parts). The next strip fit in the same way (separately from the first), but you need to sprinkle about half a plank and start laying from it. But the next lane must begin again with a whole board. So, it turns out, the laminate is placed in a "chess drawing", it looks very pretty.
After we laid the second strip and thoroughly connected the elements with each other, you need to take these powder and install the ridge in the side groove to the first strip, which lies closer to the wall. It must be done at an angle of 20, a maximum of 30 degrees. Hurry strongly, and then gently push. Both stripes should come into each other without gap.

How to lay a laminate with your own hands: