In our housing, you have to solve a difficult task - it is necessary to place many things on a relatively small area. For this reason, we try to use each centimeter to use the maximum. An example is a bright example - the use of sliding doors in furniture instead of swinging. Another example is the compartment of the cabinet. Properly selected it allows you to use all the existing volume, and not just the area.

Organization of the internal space of the cabinet coupe

To properly organize the internally space of the wardrobe, it would be nice to know what can be delivered there. Most often, the set consists of several shelves, a branch under the shoulders for clothes. There may be more retractable boxes. These are the most common types of fillings, but far from the only one. There are still special hangers for trousers (trousers), skirts (skirts), holders for belts and ties, special shelves for shoes (shoes). Moreover, they can be stationary and retractable. They allow you to more compactly place the clothes of a certain type and it is always in a reserved place.

All these devices are called the cabinet fittings with a compartment or components, but most often the phrase "Filling the cabinet compartment" is used. It more accurately reflects the essence - these are various devices for organizing space inside.

Holders and crossbars

The crossbars under the hangers can be located parallel (1, 2, 4) or perpendicular to (7) relative to the cabinet door. It is more convenient when the crossbar parallel to the door - all things that hang on it are visible. But in this case, the depth of the cabinet cannot be less than 60 cm - there are so many places with clothes.

If the crossbar is perpendicular to the doors, the cabinet may be less deep - 40-45 cm. But in this case, only the first thing is completely visible, all the others are hidden. Not very comfortable. You can solve the problem by installing the retractable system. In this case, it will be more convenient to use.

Often compartments for clothes on the shoulders are more conveniently located at the top of the cabinet, leaving the bottom under the shelf and drawers. In this case, not ordinary crossbars, but movable. This device for filling the cabinet coupe is called "Pantographs".

Pantographer is a crossbind of hangers that can descend

The dimensions of pantographs are different, but if you want to equip ready, and not individually according to the size made by the option - look in advance the size and "Customize" the width of the compartment. After all, it is necessary to leave the place for fastening the mechanism.

Shelves and drawers

Filling the cabinet coupe rarely costs without shelves and boxes. The shelves with a closet of the coupe make different depths and heights - it depends on the fact that you are planning to lay on them, but the minimum height of the shelf is 30 cm. You can put several sweaters and T-shirts.

Most often, the shelves are made of laminated fiberboard, but you can install the mesh. They occupy very little space (in thickness) that when problems with dimensions are also plus. The second positive moment is if the mesh shelves are high, it can be seen from below, which lies there (at least partially). Their disadvantage is fixed sizes that will have to be considered when planning. Although, a small error can be adjusted at the expense of the planks, which can be put on these shelves.

Retractable boxes can also be from chipboard or mesh. The advantages of the shortcomings are the same. In some cases, mesh boxes are called baskets. Easy and comfortable, dust do not accumulate in them.

Adaptations for compact placement of things

Most often in the cabinet is not enough. Even if they have decent dimensions. Therefore, the filling of the cabinet coupe is trying to develop so that the existing volumes are used rationally. For example, instead of traditional shelves for shoes (mesh or chipboard), you can put the retractable junction. They are great for low shoes - shoes, sandals, shoes.

Due to the fact that the shoes are stacked obliquely, it is better visible. If you use mesh shelves for shoes, due to the fact that the heels are "falling" significantly saves the place.

Many problems arise with storage of trousers, jeans. For this type of clothing, there is also a special device, which is called a often "trouser". These are retractable strips, which hang twice folded pants.

Usually they are located under the shelves at the belt level, it is possible at the level of shoulders. It is not necessary - inconvenient above. At the top of the cabinet, the compartment is better to place a pantograph or shelves for rarely used things.

Also in filling for wardrobes there is a device for storing ties and belts. On the same devices, you can store scarves, cough, etc. This hanger is similar to the trouser, only has smaller sizes.

It is more convenient to place on the side of the section for clothing. In width, they are about 15-20 cm, so there will not be a lot of places. Another option for placing such things is a pull-out box, broken by partitions into small squares.

What else is worth saying about the filling for the wardrobes? On firms that make furniture, all (or almost all) extending systems are solid. Each device further appreciates the installation. If you have at least a small skill of handling a drill and (or a screwdriver), you can mount yourself by purchasing these devices on the company. It turns out a little cheaper. You can save anymore if you buy them through online stores or straight from China.

These are all devices that are used when filling the wardrobes. The main thing is to place them correctly, determine the size of sections and doors.

Internship Planning: Technical Moments

To develop an internal device of the cabinet compartment, it is necessary to determine the number of clothes of a different kind that you plan to put in this furniture. Under certain volumes of different types of clothing and filling the cabinet compartment. It will be highly dependent on the location of the embedded furniture. For example, if the wardrobe is in the hallway, it is necessary to highlight the place for the outerwear. Since the coat and raincoat are long, then this compartment must have a large height - 130-150 cm. You also need to take place to store the caps / gloves / scarves.

Such departments will probably not be in the bedroom. But here it can be built-in TV (there are such wardrobes of the coupe), which in the corridor will absolutely do not need anything. In general, carefully think about what you are going to store in each specific closet compartment, measure the size of large-sized things, add at least 10 cm to freedom of action and apply these dimensions to the plan.

When determining the height and width of the shelves, do not forget to take the thickness of the chipboard if the furniture is collected from this material. It only seems that 18 mm is a bit. If shelves, for example, five, then the material will take almost 10 cm of height.

When determining the size and number of doors, breaking the cabinet coupe on the section, special attention is paid to sections in which there are retractable systems. The fact is that the doors are not exactly 1/2 or 1/3 width of the cabinet, but a little more. Specifically - more on the double profile width. That is, if you have three doors in a width of 180 cm in the closet, then opening one of them, you will get free space not 60 cm, but less.

Therefore, the width of the drawers (and the sections in which they are built) should be slightly smaller than the width of your doors.

And the second point concerns the depth of the cabinet. If a pantograph or a holder holder is installed with clothes, the minimum width is 60 cm. When installing retractable hangers for the shoulders, 45 cm is enough. But note that the retractable design must have no more than 40 cm in length - there is still a place for freedom of movement. Doors.

Popular wardrobe filling options

As you understand, options here may be mass, but there are several basic complete sets that can be modified under our own desires.

Which departments should be

Conditionally, the entire height of the wardrobe can be divided into three zones: lower, medium, top. In the lower zone, shoes usually place, some types of household appliances (vacuum cleaners, for example). At the top most often make high-mezzanine shelves, which are used to store things that are rarely used. There you can also remove the unreasonable things.

The whole middle part is usually occupied by shelves, drawers, hanger departments. Here with their placement usually and you have to tinker. So that everything is convenient for all family members.

How to organize a small wardrobe coupe inside

Any filling of the wardrobe in the overwhelming majority has some amounts of shelves and seats for hangers. This is the easiest option and the most economical. Usually they are two-door - the recommended width of the door canvase is no more than a meter, which in this case is observed. The smallest wardrobe is a slightly more than a meter wide. They are usually installed in the corridors of small apartments. Two doors are also done in the event that the length is slightly more - up to 180 cm.

There will be no special diversity here, but it is quite possible to install a pair of boxes if necessary. Here there will be retractable devices for compact accommodation. The trouser will need to be so accurate.

Mid-sizes

If the wardrobe width is 180 cm or a little more - about 2 meters, most often divide it into three sections. These models are called three-door, since most often the number of sections coincides with the number of doors. With a width of 2 meters, each of the sections is obtained by a width of about 60 cm (including partitions). This is a rather convenient format - not too wide and not narrowly, with such a length of the shelves there will be no problems with the SSP saving even if its thickness is 14 mm.

With an increase in the cabinet length to 270 cm it can still be three-door - the door width is still less meter. But at high height, such doors are already quite massive and require good fittings (guides and wheels should be of good quality so that the slip is smooth). So with a width of more than 240 cm, you can plan 4 doors. At the same time, sections can be three. Just to access each of them will have to move two doors.

Filling the cabinet compartment medium length

The first and third sketch consist only of shelves and a branch under clothes on the hangers. The place is distributed in different ways, but the shelves are a lot. All other retractable drawers and / or lattice baskets have been added.

Boxes can be located at the bottom. Based on the lower part, they give the whole design increased rigidity. But the bottom boxes are not very convenient - it is necessary to go low. Because more often they are raised higher, so that they are at about the level above the middle of the hip or at the belt level. But in this case, an enhanced jumper is needed under the lower box - to give a greater rigidity of the entire structure.

Pay attention to the mezzanine - the upper compartments. In the above options, they have the same size as the sections, but it is not necessary. If necessary, one mezzan can be located above two sections. It is only important to correctly calculate the thickness of the material for the shelf, so that it does not be bombed.

Circuit Couple 3 meters

With the length of the cabinet coupe in a meter, the sections make 4, and the doors can be more. There are no more spaces, but there is no special difference in the filling. Just more all the same shelves, pantographs and drawers / baskets. Combinations can be a lot. Choose the option that suits you most, but it can be changed - under your requests and tastes.

A few more options for internal filling of large cabinets in the photo gallery. There are several interesting ideas about the organization of storage of things on open shelves - in baskets or plastic boxes. This, by the way, the budget replacement of drawers, as well as the way to modernize the filling of the cabinet coupe without problems and special costs. If you decide that there are few boxes, but a lot of shelves, it is not necessary to order boxes and suffer with their installation. Not bad replacement - drawers or basket of suitable size.

There is even a compartment for storing household chemicals - in plastic trays, pinned on the wall. Narrow boxes and wide baskets are also an interesting option.

Interior arrangement of the corner cabinet coupe

For an angular cabinet to use, it is necessary to ensure the availability of things located in the corner. The easiest way to do it with shoulder shoulders. There are several options. The easiest to implement is to install two rods for clothes without partition between sections. In this case, the width of the cabinet on both walls should be the same, and the missing rigidity adds a rack to which the crossbars are attached.

The second option is one part of the cabinet has a smaller depth and "behind the wall" it will be possible to place output clothing. She uses not so often.

And a way to establish a spinning rack in the corner. They can be found in stores specializing in shopping equipment.

In the corner - spinning rack. Quite convenient

Only choose a model with a rack - it will sign the shelves from above, giving stiffness and stability. The rest of the filling of the wardrobe is not much different.