Mount the monitor on the wall - do it yourself. Do-it-yourself monitor bracket installation

Modern monitors delight us with stylish design and stunning image quality, and you can place them anywhere, just buy a monitor bracket. Having decided to install such equipment on the wall, you can, of course, turn to professionals. However, if you are able to make several measurements and screw in a couple of screws, then you can do this work with your own hands.

Wall fasteners and its types

The wall bracket is a special mount that is designed to mount the device on the wall. Today, you can find a huge number of brands and models in stores, but among them there are three main types of monitor brackets. The main difference between them is how much they allow to change the angle of the display, which makes it possible to get rid of the glare. Before you attach the technique, you must make sure that your wall bracket is suitable for this model. The most common standard today is VESA.

There are several basic types of monitor fasteners on the wall:

hard fasteners;
inclined fasteners;
swivel fasteners.

Hard hardware allows you to hang the device on the wall at a distance of several centimeters from it. Such a wall bracket for fixing the monitor has no adjustment functions. After installation, you will not be able to rotate or tilt the device. In this regard, it is best to attach it to a similar fastener at eye level. The main advantages of such a holder are reliability and low price.

The inclined monitor mount allows you to set the display above eye level, which allows you to change the angle depending on the situation. Different manufacturers of brackets angle may be different, but the average is about 10-20 degrees. In this case, the monitor is mounted on the wall at a distance of 10-15 cm from it.

Swivel fasteners allow you to tilt, turn or move the monitor as you like. This option is the most functional. But the cost of such a bracket is several times the above models. In the characteristics of the bracket you will find restrictions on the size and weight of the monitor. Based on this, you will be able to choose the best ratio of performance and cost for yourself.

Bracket height

Many people attach the monitor to the wall too high, resulting in discomfort when viewing and pain in the neck, due to an uncomfortable body position. Most experts advise to place this technique at eye level. Of course, there is no exact value at which height to hang the device. The optimal height of the location of such a unit depends on its size and the area of your room. In a spacious room, the display can be positioned higher than in a small one. It is best to personally test different options.

When choosing the optimal location for the location of the monitor should pay attention to the strength of the wall. Installing the bracket on a wall of concrete, wood or brick is not difficult, but if the wall is finished with gypsum plasterboard, then you will not be able to do without special tools and certain experience. In this regard, it is not recommended to install monitors weighing more than 30 kg on such a construction, and if installation cannot be avoided, then special butterflies should be used, and the bracket should be fixed to the base of the supporting profiles.

Equally important are the climatic features of the object. Everyone knows that the quality of work of any device strongly depends on external factors. In this regard, when choosing a place to install the monitor holder, the following factors should be considered:

do not hang the monitor in rooms with high humidity or in areas of strong sunlight and heat;
if the monitor is installed in some limited space, such as a niche, it is necessary to provide a constant air exchange.

As soon as you determine the place, take the masking tape and mark the location of the monitor with your own hands on the wall surface. For good air circulation around the perimeter of the monitor, it is necessary to leave at least 20 cm free gaps.

The process of mounting the bracket

As a rule, the wall bracket for mounting the monitor consists of two parts:

plate, which is attached directly to the wall;
fastener that is installed on the monitor.

The wall bracket is attached to the monitor with special screws. Holes designed for them are located on the back of the monitor and are sometimes closed with plastic plugs. Measure the gaps between the fastened fasteners and the edges of the monitor. Using this data, you can calculate and mark the location of the plate, then drill holes in the wall. With the help of dowels, you will need to fasten a plate to the wall, then hang the monitor and the bracket on it, then both parts will be fastened.

Homemade fasteners

If you want to save a little on the purchase of a monitor holder, you can do it yourself. To do this, you will need an asymmetrical duralumin profile, M4 screws, dowels, and 20x4 self-tapping screws. Measure the distance between the holes on the back of the monitor. Then cut the two guides out of the profile. Ready guides are carefully attached with M4 screws to the rear panel of the device.

At this first stage of work can be considered complete. It is only necessary to attach the monitor to the wall. To do this, you will need a furniture shield, to which the two remaining guides from the profile are attached. With the help of dowels, the furniture panel is mounted on the wall, after which the device is installed on it.

How to hide the wires

Even before you hang the device on the wall, you need to think about how you can hide the wires. If the wall is made of drywall, you can make a cable channel with your own hands. To do this, cut holes in the wall behind the device, into which cables will be routed. The second hole must be cut at the bottom of the wall, where the cable will be placed in the plinth. The next option is to make a cable channel on the wall surface. It can be painted in the same color as the wall, so that it is almost imperceptible, or, on the contrary, to make it contrast, to decorate with painting. Shtrobit concrete wall in order to hide the cable there, it is impractical.

Important questions will have to be answered before you hang the monitor on the wall without a bracket. The absence of shelves and other additional structures that support massive equipment is not always justified. And it is easier to repair a TV to be repaired, if it is not suspended. It is better to entrust the matter to a specialist, if not - video materials and recordings of master classes with which Internet portals abound come to the rescue. The rest will have to rely on yourself, the strength of the wall and the reliability of the supporting structures.

How to hang a monitor on a wall without a bracket: “strengthening from the rear” is useful.

How to hang a monitor on a wall: what is considered?

Initially determined with the look of the TV. Kinescopic electronic “creations” are unlikely to harmoniously look on the wall, which, most likely, will not have to be tested for durability for a long time - the probability of tearing out fasteners is high. Features of the monitor installation:

· This method is suitable for liquid crystal and plasma models.

· Given the maximum proximity of the equipment to the wall, it will have to be connected if the connectors are located on the sides.

· You need to find the optimal place for the monitor. It makes no sense to hang it under the ceiling, likewise - close to the floor (then it is more convenient to install a shelf or bracket). The ideal is the height at the eye level of a person who watches TV sitting.

An important detail: the wall chosen for fastening must be “in the possession” of the TV host, as it will have to be strengthened on the reverse side.

Correctly hang the monitor on the wall?

There are no questions with the thickness of the wall (lucky if it is brick), bolts of the appropriate length are acquired (in order to pass through the wall and an additional metal plate, reach the monitor).

Important! Despite the harmlessness to view of modern screens, they are suspended on the calculated length - it is calculated based on the length of the diagonal of the technology, multiplied by three times. Install the TV according to the scheme:

1. Acquire a perforated plate, which is fixed for strength on the back side of the wall. It should exceed the perimeter of the TV by 4 cm.

Does the monitor have a standard VESA mount for the bracket, and the monitor needs to be hung on the wall? Not a problem - we will fix it ourselves!

For many years, the Samsung T220 excellent monitor has faithfully served me. I bought it when large widescreen monitors just started their distribution. Monitor 22 ″ with a ratio of 16:10 with a beautiful picture, unattainable for many modern monitors. Everything would be fine, but it became necessary to hang the monitor on the wall, while this monitor model does not have a standard VESA mount for mounting on the bracket.

Unfortunately, I did not take a photo of how it was and therefore I will simply attach the images I found on the web.

The task is to disassemble the monitor, make holes, install the mounting screws, assemble the monitor, and fasten the mounting pad from the bracket to the screws.

To install the monitor on the wall was bought not expensive, but convenient and reliable bracket Holder LCDS-5039.

So, we disassemble the monitor. This is not difficult to do - we unscrew the two screws at the bottom of the monitor, after unhooking the monitor stand, and carefully remove the back cover (it is fastened with latches). These operations I have not filmed.

We fasten the mounting platform from the bracket. The assembly site smiles at you. :)

This is how the fastener looks from the inside. To distribute the load used increased washers from two sides.

And this is what a disassembled monitor looks like. Display, electronics and standard stand.

Install the back cover into place, snaps tightly and do not forget about the two screws below.

All connectors on the rear panel are closed with a cover (not in the photo). The truth is that I did not return it to its place - I see no point. Then the bracket itself and its installation on the monitor (as it will look).

The next step is to mark the holes on the wall, drill holes and install the bracket. I must say that the walls in our house are terrible - emptiness and other delights. Two holes of the three drilled well and securely, and the third fell into the void. But on two dowels everything was held securely. True, I realized that I hung the monitor tall and the next day I decided to lower it 5 cm lower. I had to tinker. Several times rewired holes, all came across voids. Postponed for a day. And today, instead of the dowels 6 * 80 I used the "eight" (I do not know the length, 12 centimeters). I achieved reliability and left it. Now you need to find a trim wallpaper to glue the holes. But behind the monitor can not see anything. =)

That's what happened.

And that's how it was. I apologize for the quality of the photo - shot on the phone.

As you can see, the workspace has been released. Now not two, but three cats will fit on the table. =)

Mount the monitor on the wall - do it yourself

Wall fasteners and its types

There are several basic types of monitor fasteners on the wall:

hard fasteners;
inclined fasteners;
swivel fasteners.

Bracket height

When choosing the optimal location for the location of the monitor should pay attention to the strength of the wall. Installing the bracket on a wall of concrete, wood or brick is not difficult, but if the wall is finished with gypsum plasterboard, then you will not be able to do without special tools and certain experience. In this regard, it is not recommended to install monitors weighing more than 30 kg on such a construction, and if installation cannot be avoided, then special butterflies should be used, and the bracket should be fixed to the base of the supporting profiles.

Equally important are the climatic features of the object. Everyone knows that the quality of work of any device strongly depends on external factors. In this regard, when choosing a place to install the monitor holder, the following factors should be considered:

do not hang the monitor in rooms with high humidity or in areas of strong sunlight and heat;
if the monitor is installed in some limited space, such as a niche, it is necessary to provide a constant air exchange.

The process of mounting the bracket

As a rule, the wall bracket for mounting the monitor consists of two parts:

plate, which is attached directly to the wall;
fastener that is installed on the monitor.

Homemade fasteners

How to hide the wires

If you do not like the external cable channel, you can hide the wires in a drywall construction. It can be made in the form of a niche or a ledge. To ensure natural ventilation niche should be spacious. Wires and cables from the monitor are hidden in the holes pre-cut in the walls of the niche. Plasterboard ledge looks a little better. Firstly, the monitor is guaranteed to be well ventilated, and secondly, on the sides of the monitor you can make shelves.

TV on the wall: how to hang without a bracket or make it yourself?

TVs are now often hang on the wall. So they do not interfere, for them it is not necessary to specifically put the tables or coasters. These devices can be attached with a bracket. But this is not the only way. In some cases, cost and without such a unit. Why buy an expensive design, if you can cope on your own? Learn how to hang the TV on the wall, without buying bulky frames, which monitor is suitable for this, how to hide the wires, so that everything looks nice and neat.

For convenience, televisions are often hung on the wall.

In this case, we must take into account the weight of the screen, the place where it will be located, the material on which it is to be fixed. Not all displays can be installed this way. Massive products still need some kind of "foundation."

What type of TV can I hang without a bracket?

Before you hang the TV on the wall without a bracket, you need to find out which monitors, in principle, can be mounted without proper support. If your equipment does not meet the requirements listed below, it is better not to risk it and purchase a suitable frame. Then there will be no questions whether the screen is firmly held, whether the wires are not bent, or if it is too close to the wall.

Here are the characteristics of the displays that can be fixed without support:

Only “flat” TVs are suitable - liquid crystal (LCD or LED), plasma (Plazma). CRT monitors (“pot-bellied”) cannot be installed this way - they need a frame with a shelf.
All connectors and cords should be located either on the sides of the device, or in front. If they are on the rear panel, after installing the equipment, they will not be able to connect anything to them.
To decide how to attach the TV to the wall, you need to see what it is made of. You should not screw the massive unit on a fragile basis. Unfortunately, it is impossible to determine straight away what exactly the weight will withstand the material. But if you see that the wall is unreliable, it is better not to risk it.
On the monitor case should be grooves for bolts.
It is desirable that the documentation for the screen indicated that it can be hung. Some models are designed to stand on a solid and level support. And when working "in the air" they may experience problems.
Large displays are best not to mount without a bracket. In the instructions for the frame is always written the weight that he can withstand. A homemade units such accuracy is not achieved. If a small TV comes out to hang without problems, then the massive one can fall, breaking the mount and tearing the wires.

How to choose a place for the TV?

A fixed monitor can no longer move or tilt anywhere. Therefore, you must choose a place in which you are most comfortable to watch movies. The screen should be located at a certain distance from your eyes. It depends on the size of the display and the type of image that broadcasts TV (analog format, digital format, FullHD). If you are thinking about how to hang the TV on the wall, first find out its diagonal.

To enjoy TV programs on a 32-inch screen, it should be installed about two meters from the hypothetical viewer. For a 50-inch screen, this distance is already three meters.

However, more should be guided by their feelings. Sit where you plan to watch a movie. Imagine that you have a TV. It should be level with the eyes. So that you do not have to tilt your head.

In the installation, in addition to the subjective, there are also objective aspects.

TV should not be installed where the electrical wires. It is better to find out in advance where they are located in order not to stumble upon them while drilling. There are special devices for this: metal detectors, indicators and signaling devices.
If you decide to “hide” the screen in a deep niche between the wall panels or in the closet, discard the idea. The device will overheat.
Hang the monitor in an open area. Do not "clamp" it between the shelves. It is not necessary to mount it on a completely empty wall. But some gap should be.
Install the product on high-quality and durable walls that do not crumble, do not fall apart, do not rot. To screw the screw does not fall out after a while.
It is better to mount the display near the outlet. So it will be easier to hide the wires.

Wall mount

If you want to figure out how to fix the TV on the wall without a bracket, this will be very easy to do. And do not need any mounting other than screws. On one condition: you are going to install a display with a diagonal of less than 24 inches. It can be fixed as a frame for a photo. Just hanging on the wall.

The device in which this type of attachment is available is equipped with “eyelet” slots. The instructions for it should indicate what screws to use. Perhaps they are even included in the package. This should be checked with the seller. A list of suitable screws for different materials is in the next section.

With such an installation it will not be possible to hide the wires behind the monitor. He will be too close to the wall.

If the documentation does not say that the monitor can be fixed in this way, it is not worth trying. This may cause problems with the device.

Mount with support

There should be some distance between the screen and the wall (unless otherwise indicated in the instructions). It must not be screwed close to the surface. He needs space for ventilation. We'll have to make a mount. However, many monitors have holes that allow installation without a bracket. Further tips are suitable for any installation method.

Before you hang the TV on the wall, find out what it is made of. It depends on what parts to use, and how heavy the units can be fixed.

Concrete, brick. The best option (if not crumble). Dowels for concrete from 50 mm in size must be screwed into them. The material will withstand even bulky products. But the wall should be thick and not hollow.
Tree. Installation is possible if it is of good quality. Without large cracks, rot and internal voids. For fasteners used dowels for wood sizes from 30 mm.
Drywall At high loads will sag. You can fix the screen not on the sheets themselves, but on metal guides. Then the design will be more reliable. But installing large TVs is still not worth it. Dowels butterflies are used. When screwing, they will “unfold” on the back of a sheet of drywall and due to this they will not fall out.

Independently assemble fastening possible from improvised means. For example, fit the parts that you have left after the repair or assembly of furniture. Suitable equipment can also be purchased in specialized stores.

The frame consists of two parts: one is screwed to the wall, the other to the TV. The heavier the monitor, the stronger should be the mount. Designs may vary depending on your needs. You can make a groove to hide the wires, create some kind of decorative element, add something from yourself.

Here, for example, support for a small screen:

Take the furniture "tire", wooden block and anchor plates for windows.
Drill holes in the "tire" and bar. Pre-measure the distance between future holes so that the parts can be attached to each other.
Screw the "tire" to the bar with screws.
After that, screw the bar with the "tire" to the wall.
First, mark where the holes will be located. Use the building level to set the frame level.
Drill holes in the wall and drive dowels into them.
Drill holes in the bar.
Screw the bar to the wall by twisting the screws into the dowels. Use a screwdriver. The usual screwdriver can not cope here.
Use screws to secure the anchor plates on the back of the TV. They can be trimmed with a grinder, if not fit.
After that, attach the screen to the bar with the "tire". This is done using hooks on the anchor plate.

So you can only hang light TV. Heavy loads this mount will not stand.

It is not so easy to find out exactly what dimensions the created frame is designed for. The brackets usually write the maximum weight of the monitor. But the self-made unit will have to be checked “in the field” conditions.

How to hide the wires?

Here's how to hide the wires from the TV on the wall:

The most obvious option is right behind the monitor. If the outlet is close, simply place the cables behind the screen. Just see that they are not bent or twisted anywhere. It will look only a small piece with a fork.
You can build a channel right in the wall. But it makes sense to do if you are still repairing.
If you have a drywall wall, hide the wires better in it.
Decorative techniques. It is rather a disguise, not a cover-up. You can turn the cable into a part of the interior. For example, stick petals and flowers to it so that it looks like a stem. Or make it an element of a design composition.
Moldings, or cable feeds. Hollow "tubes" that are attached to the wall. They put all the wiring. May be invisible or beautiful.

The instructions for the TV usually indicate the available installation methods. You can get specific information from the seller or manufacturer. When buying a monitor, ask if you can hang it on a wall without a bracket, and whether it is worth purchasing additional parts. If you have never done installation work, it is better to turn to professionals.

NastroyVse.ru

How to fix the TV on the wall

Not a single home is without a TV. It is so pleasant in the evening after work, with a cup of tea or a glass of wine, to relax on the sofa in front of the TV hanging on the wall. After all, this option of placing the TV does not require a lot of space and it is much more convenient to watch it than if it were standing on a nightstand or a coffee table. But how to attach a TV? Let's figure it out.

How to choose the right place on the wall for the TV

Choosing a place under the TV, you should take care of safety and convenience when watching it. Therefore, you should use the following rules for the location of the monitor.

Hanging up the TV, you need to hide the wires and cables.

The choice of the room for the TV. It all depends on the arrangement of your furniture and the location of the windows. Sit on the place from which you plan to view, and select the most convenient point for your eyes. Do not forget to take into account the dimensions of the television panel.

Council Do not place the TV in front of the windows. Glare and reflections on the screen will not let you relax.

Comfortable height. The optimum height is at eye level. Therefore, you should take into account the audience that will watch TV with you. You can hang and slightly lower or higher, it will depend on the characteristics of the room. For example, a panel with an impressive diagonal should be hung slightly above your eyes, and if you prefer to watch TV on the floor, lower it lower.
Wires and cable. Ugly if all the wires just hang out from under the TV. They need to hide. Well, if during the repair you have thought of everything and pulled out the socket and cable directly behind the TV. Otherwise, use the cable box and decorate it to the style of the room.

Council When repairing it is desirable to place the unit on 4-6 outlets at a height of 30 cm from the floor. Today, technology does not stand still, and such sockets will certainly come in handy.

How to attach the monitor to the wall. Basically, there are three methods: bracket, without bracket and TV mounting to the ceiling.

TV mounting methods

Mounting with bracket. Bracket translated from German - holder. This device is used to mount objects on a vertical surface: the device will help to hang the TV on the wall.

Today there are many brackets in stores and they are divided according to some criteria:

oblique - suitable for small TVs up to 26 inches;
movable - used for mounting a flat monitor with a diagonal of 13-26 inches.

Movable TV Mount

The holder is equipped with a rotary lever, through which you can change the angles of inclination to the sides and up and down;

low profile - designed for a maximum of 40 inch TVs;
adapter - adds width, maintains the panel no more than 65 inches;
hinged designs - with their help, you can turn the TV in any direction.

TV mount without bracket. This method is used in the case when it is not possible to hang the monitor on the wall. Here a special frame is applied, on which the TV will be hung after.

Ceiling option. This is the same bracket, it is simply fixed to the ceiling. Before you buy a pendant mount, you need to determine what kind of trim you have on the ceiling and how high the ceilings are.

How to attach the TV to the wall with your own hands using the bracket

The easiest way to hang a TV on the wall is to buy a bracket for this. Having defined the mount for the TV, we can proceed to its installation using these tools:

screwdriver;
roulette;
screws.

We start by attaching the TV to the bracket plate.
We try on the wall and make marks in the attachment points.
Mark the holes.
We attach the structure to the wall and attach it.

Minimal effort on your part will enable your family to come together to watch interesting films.

How to attach the TV to the wall do it yourself without a bracket

You will need the following tools:

electric drill;
screwdriver;
roulette;
screws or dowels, depending on the material of the wall;
hammer.

The method of mounting the TV without the bracket

Take, for example, a television set with mounting holes spaced at a distance of 20 cm in width and height. For this monitor, you will need a perforated plate 24 x 24, you can take more.

With the help of roulette mark on the wall a place to install the TV.
We make holes in the wall by tags.
Drill holes in the plate, identical to the holes on the back of the monitor.
Fasten the plate to the TV with 4 bolts (supplied with the TV).
Put the plate to the wall and fix the dowels.

The work is finished, you can enjoy watching TV programs.

How to attach the ceiling version of the bracket do it yourself

Tools you can't do without:

electric drill;
drill;
screwdriver;
roulette;
dowel;
hammer.

Ceiling bracket mounting scheme

Having collected the above tools, you can start the installation work.

Make a mark on the ceiling and drill holes for mounting bracket rods.
We attach the rods to the holes and fix with dowels.
Removable part of the bracket bolted to the back of the monitor.
We connect both parts. We connect the part to the bar with the TV already fixed and fix the connected parts.
We finish the work by installing protective decorative caps.

This is one of the available ways to attach the TV to the ceiling. The whole design looks original and gives the room a sense of spaciousness.

For safety and ease of installation of the TV you need to use these tips from experienced professionals:

It is best to install the design fit drill 1/8 inch. This diameter is less than mounting screws, so they sit close.
Do not hang TV monitors that weigh more than 30 kg on walls made of drywall.
TVs that have a weight of more than 20 kg, and their width exceeds 1.5 m, need to hang together, one hard to cope with this task.
Cables should be connected only after complete installation.
To avoid kinks and the ignition of the power cable, make sure that whatever it bends and is taut.

Not far from the TV you need to place several outlets

Control the process to avoid drilling into the electrical wiring hidden in the wall when drilling. Check the technical plan of the house or apartment where your wiring is located.
For fastening of the above mentioned structures use specially designed dowels of different sizes.

A screen that can be hung from the ceiling or on a wall solves many problems. With the help of such systems it is easy to hide cosmetic defects that you have in your apartment. Such a structure saves space and looks very impressive. In addition, the hanging TV can always be interesting to beat the decor, while creating an emphasis on its presence in the room. Thanks to modern metal structures that help to keep the TV, you can set the tone for the whole room and realize the most audacious and interesting design solutions.