06/29/2017 2 1,551 views

How to defrost a refrigerator correctly and quickly? - the question is very important, because food is stored in it, and their storage quality depends on its purity. Modern models do not need defrosting at all, but older ones cannot do without it. Below you will learn how to quickly tidy up the refrigerator.

What kinds of refrigerators and what you need to know about them?

Before you start defrosting and washing, you should figure out what kind of model is in your home and what they are. Almost every refrigerator has two chambers: one for storing food at a temperature of about 0 degrees, the second is a freezer, where the temperature can be from -6 to -25 degrees. The first compartment also has the name of the freshness zone, that is, there the products can remain suitable for consumption for quite a long time, if you follow the rules of storage.

So, two-chamber refrigerators can be one or two compressors:

  1. Single-compressor - defrosting products in them is the same as for single-chamber ones: the process takes place immediately in one and the second chamber.
  2. Dual-compressor - the freshness zone and the freezer can be defrosted separately.

But the defrost itself in different models of refrigerators can vary and occur in several modes:

  • manual;
  • mixed (cameras are thawed separately);
  • automatic (defrosting occurs in two chambers independently).

To determine what type exactly your fridge belongs, you need to look into the instructions, where the rules for caring for them will be indicated. Do not throw away the documentation after purchase and after the end of the warranty period, the information specified there sooner or later may be useful.

How to properly defrost refrigerators Know Frost?

Modern refrigerators with the function "Nou Frost" are very convenient for the family. They do not require manual defrosting, everything happens independently, a person needs only to control the process. The system works in such a way that the refrigerator itself monitors the melting of ice and evaporation of moisture. In addition, you can set or a certain period of time when the defrosting process begins, or else set the mode, which controls the amount of frost formed.

The defrosting process for such refrigerators can proceed in two different modes:

  1. Drip - when all the moisture and thawed liquid accumulates on the back wall, and then evaporates.
  2. Wind - the cooling system of the refrigerator occurs on the same principle as in the air conditioner. First, the moisture settles on the back surface of the refrigerator, and then evaporates due to the heater.

Despite the fact that such refrigerators are fully automated, they cannot do without human help. Once a year it is necessary to carry out general cleaning with special cleaning products to remove all bacteria and odor.

Regardless of which brand your refrigerator is: indizite or atlas - the defrosting process will look exactly the same.

Defrosting is very useful for the refrigerator, because after it the entire work cycle is updated, therefore, it starts to work more productively and more powerful.

What you need to defrost a two-chamber refrigerator?

Your family has an old two-compartment refrigerator that needs to be defrosted. The need for this procedure can be traced by the amount of accumulated ice, if it becomes too much, then it is time to reset all processes. Manual defrosting of the refrigerator is as follows:

  1. Remove the entire contents of the refrigerator, this applies to both the freshness zone and the freezer. Fold everything in a dark cool room. A few hours will not affect the quality of products.
  2. Unplug the refrigerator from the network.
  3. In a designated place, place the tank to collect water.
  4. To make the defrosting process faster, do not close the door.
  5. To eliminate the risk of water spreading through the kitchen, lay dry rags around the refrigerator.
  6. Defrosting will take several hours, the specific time depends on the amount of accumulated ice.
  7. As soon as there is no moisture in the refrigerator, thoroughly wash all surfaces and shelves. This can be done with a special composition or regular soda. After that, additionally wipe the surface with a solution of vinegar to destroy the bacteria and remove the smell.
  8. Wipe the fridge dry with a clean cloth and only then turn it back on to the net.
  9. Put all the shelves in place and leave for another 30-40 minutes, then lay out the products in their places.

To wash the refrigerator, set aside a separate day, since the whole process can take about 6 hours.

Not every housewife can allocate so much time to defrosting a refrigerator, because at home there are other things to do. Therefore, they are looking for a way to speed up the process. It is important to understand that quick defrost has a very detrimental effect on the mechanisms of the refrigerator and can lead to its breakdown, it is necessary to resort to it only as a last resort.

The easiest and most famous way is to use hot water containers. It is placed directly under the block of ice so that the steam accelerates the melting process. Periodically, the water can be changed if you notice that it has cooled.

To speed up the defrosting process, some housewives use hot air, it can be a fan or a hairdryer. The jet is sent directly to the icy place and left for a few minutes, then change its direction. For two hours, you can achieve complete thawing of ice, and if it is not terrible for a fan, then a hair dryer during this time may become unusable.

If you do not want to experiment with the temperature of the front, then you can use the salt. It is poured under the icy part and left for some time. Pretty soon the salt will literally ruin the ice and you can start washing. It is important that salt particles should be carefully removed before starting general cleaning, as they can scratch the surface.

Vinegar can be used instead of salt. It is poured into a container and placed under a block of ice, it will take several hours to leave no trace of it.

It is very important to understand that by saving time you greatly shorten the life of the refrigerator. Do not abuse these methods if you do not want to spend a tidy sum in the near future to repair or purchase a new one.

In order not to destroy the refrigerator, it is very important to follow the simple rules of operation:

  • do not use sharp objects to remove the ice, you risk permanently damaging the refrigerator, damaging the cooling tube or breaking the tightness;
  • if the refrigerator is with a manual defrosting system, then watch out for water, do not leave the refrigerator unattended. Clean water in a timely manner so that it does not accumulate and the corrosion process begins;
  • after washing, wait until all surfaces are dry, do not turn on the refrigerator in the network, if there is still moisture inside;
  • if the refrigerator is urgently needed to be defrosted, and it is hot in the street, then wait until dark when the air temperature drops slightly. So you will avoid sudden changes in temperature, and the refrigerator itself will be easier to come into operation.

Video: how to defrost a refrigerator correctly and quickly?

How often should you defrost a refrigerator?

How often it is necessary to carry out general cleaning depends on the speed at which frost forms on surfaces and on how often the freezer is used. However, this should be done regularly, because the accumulated ice greatly increases the amount of energy consumed, while the refrigerator itself begins to give out worse cold and the motor wears out faster.

Regardless of the model of the refrigerator, there are certain recommendations regarding defrosting:

  1. Refrigerator Nou Frost is enough to defrost once a year, at the same time to carry out its thorough cleaning.
  2. A refrigerator with a manual defrosting system will need to be put in order more often - preferably once a season. In the summer, you can clean up twice.

  Refrigerator defrost drip system  - it is equipped with many modern refrigerators. When you turn on the defrost mode, all the thawed moisture accumulates on the back wall, and then evaporates on its own. The risk of leakage is eliminated.

  How to wash the fridge inside after defrosting? -for washing it is best to use special formulations. They are most effectively struggling with possible germs on the surface, while allowing them to eliminate the unpleasant smell, if any. At home, you can prepare a soda solution: dissolve a couple of teaspoons of soda in two liters of water. Carefully wipe the door, all shelves, back and side walls with the prepared solution. In addition, you can use vinegar, it perfectly eliminates unpleasant odor and fights germs.

  Is it possible to defrost a refrigerator with a hair dryer? -the use of a hair dryer to speed up the defrosting process is not contraindicated. However, you should not use the hottest mode, the best will be a strong gust of wind and the average temperature. It is necessary to direct a stream of air on all surfaces, including the most icy. Periodically need to change direction. As soon as all moisture evaporates, you can start washing. This method of defrosting is suitable for those housewives who do not have time to wait for a full automatic defrost. It is necessary to take into account the fact that the ice will melt faster, but not by much, but the hairdryer may suffer from prolonged work at maximum speed, therefore, weigh the pros and cons before using this method.

  After defrosting, how much does the refrigerator get cold? - how quickly the refrigerator starts to work with full force depends on the specific model. Older ones require more time than new ones. On average, the air temperature in the refrigerator will reach the desired level in an hour.

In each family, with a certain frequency is defrosting the refrigerator. No matter which one you have it, with an automatic know-frost system or manual, only proper operation and care will allow it to last a long life. Before you begin to use any appliances, it is very important to study the rules of use, it will save you from many mistakes and cash costs for the repair or purchase of a new one.

But without complete defrosting, there is no way to do it, because a large amount of ice on the surfaces worsens the operation of the unit, leading to unnecessary electricity consumption. So if you find that you have begun to pay more on the counter, remember how long it is to carry out general cleaning of the refrigerator.

Defrosting a refrigerator is troublesome when it comes to an old device. Modern household appliances give the housewives a minimum of hassle, but require some effort. How to defrost a refrigerator according to all the rules and not shorten its life? If you do not like this process, you can use the tips to quickly defrost the appliance.

How often do you need to defrost a refrigerator

The answer to this question depends on how modern your device is. Refrigerators in recent years are equipped with a "no-frost" system, which is responsible for the automatic defrost. Features:

  1. The fan installed inside provides circulation of cold air and quick removal of excess moisture to the outside.
  2. It stops from time to time, after which the heater is activated, and the frost melts. Due to this, ice does not form on the walls of the chamber.
  3. Water enters a special pan and evaporates naturally.
  4. The device "no-frost" must be defrosted every six months.

The defrosting of a refrigerator with a drip system is carried out a little more often due to the fact that only the refrigerator compartment takes care of itself, and you will have to manually remove ice from the freezer as it is formed. Consider how much the old Soviet-era household appliance is being defrosted - up to 8-10 hours. Its main problem is the abundant formation of ice in the freezer. It is necessary to disconnect such a refrigerator in the summer often - once in two months, and in winter - once in four months.

Stages and rules of defrosting

Different systems of defrosting require an unequal approach. The instructions differ in some details, but they must be followed. The right approach to business will ensure long-term operation of the device. The stages of the task are very simple:

  1. turned off the home appliance;
  2. got food;
  3. waited for the ice to melt;
  4. washed the fridge;
  5. dried;
  6. turned on;
  7. gave work;
  8. downloaded the products.

Training

Defrosting a modern-type refrigerator is necessary for cleaning and disinfecting, while older appliances need more ice removal. Housewives start this process by setting the thermostat knob to zero. Then be sure to unplug the power cord from the outlet: so you will protect yourself. If you are the owner of the device with a “no-frost” or drip defrost, leave the refrigerator for a while with the door open. Under the old devices it is necessary to substitute pots or bowls, because otherwise water will drain on the shelves.

In winter, there is no question of spoiling food, especially if you have a balcony. In the summer, without cooling, food can deteriorate even after 3 hours, so it is necessary to take measures to save it. The best option is food that quickly loses its freshness, wrapped in paper and put to frozen food. Cover them with a thick cloth or foil and place them in the coolest place.

the washing up

The following tips will help streamline the process:

  • Drain the accumulated water in the pans or saucepans.
  • An auto-freezing refrigerator, for example, Samsung or dual-chamber Indesit, requires only cleaning of the internal space: wipe the walls and shelves with a soft sponge soaked in baking soda solution. This will get rid of odors. All removable drawers and panels can be washed under running water.
  • Drip defrosting sometimes causes housewives to take shelves and drawers out of the refrigerator, as they freeze. These parts must first thaw out - only then they can be washed.
  • Old refrigerators should be cleaned after they are completely thawed. Do not use the knife to pick up the ice - you can damage the elements of the device.
  • Do not use abrasive cleaners. Use a cotton rag or soft sponge. To handle the camera, prepare a weak solution of water and dish detergent, you can make a solution of soda or vinegar. Then wipe the camera with a clean cloth.
  • Do not forget to wash the refrigerator outside, from time to time, clean the outer back wall. It accumulates dirt, which leads to deterioration of the device. Refrigerators of impressive size especially need to be thoroughly cleaned on all sides.

Turning on

After you have cleaned your home appliance, wipe the interior with a dry cloth to remove excess moisture. However, after that you should not immediately turn on the refrigerator. He should stand for a couple of hours with the door open so that all the water from the walls, drawers and shelves will evaporate. This will also get rid of unpleasant smells from the camera. Only after complete drying, plug the cord into the network and set the thermostat knob to the desired mark. The refrigerator should work empty, then you can put products into it.

How to speed up the process

Every year, housewives are faced with the question of whether there is a quick and safe defrosting of the refrigerator, and how to implement it. Regular defrosting and cleanliness of the device directly affects the appearance of the device and its further normal operation.

All modern refrigerators are arranged in approximately the same way: the compressor chases the refrigerant, the condenser turns the refrigerant into a liquid state and relieves the internal space of the refrigerator from warm air. Refrigerators with the “No Frost” system are recommended to be washed inside once every six months. They do not require systematic defrosting. Old refrigerators without autofrost need to be defrosted once every four months. In the spring and summer they are thawed every two months. Constant monitoring of the contents of his assistant will provide an opportunity to avoid the appearance of unpleasant odors.

If a problem arises how to properly defreeze a refrigerator, it is not always advisable to seek help from the owners of old household appliances, since the latter can differ significantly in their design from their young descendants. However, there is one universal rule for properly defrosting equipment - the older it is, the more often it will have to be defrosted, and vice versa accordingly.

Course of action

Starting defrosting the refrigerator, the thermostat pointer is set to zero. Next, turn off the device from the mains. The doors of the device open wide. Products are removed from the chambers. Under the refrigerator install tanks for collecting melt water. These can be pallets, saucepans with a wide bottom and a small height, or ordinary cotton rags, since they absorb moisture well. From time to time, the vessels should be emptied of liquid, and the cloths should be unscrewed or new ones should be used dry. To speed up the defrosting process, it is necessary to constantly ensure that the doors of the appliance are constantly open.

Products that were stored in the refrigerator can be moved to the balcony if defrosting occurs during the cold season. If the action takes place in summer, then it will be more difficult to protect products from room temperature. Frozen meat is wrapped in newspapers and placed in pots or pans. The top is covered with a thick cloth so that the warm air does not defrost and spoil the products. There is another effective solution - you can buy thermostatic packages, they are sold in supermarkets and markets, and stored products in them during defrosting of the refrigerator.

For some time, the device must be left until it is completely defrosted. Attempts to speed up this matter can lead to failure of the unit itself. Do not put in a refrigerator with hot water. Temperature drops inside the device are extremely undesirable for its normal functioning. The defrosting step should take place at room temperature and in a natural way. It is not recommended to scrape ice from the freezer with a knife or other sharp objects, as it can damage the evaporators.

After full defrosting, you can start cleaning the cells. A few drops of dishwashing detergent diluted in water. You can also prepare either soda or soap. They will do an excellent job with the dirt in your fridge and even destroy the odor. To prepare a soda solution, you need to dissolve a few teaspoons of soda in a small amount of water. It is strictly forbidden to use abrasive cleaners or pastes.

All shelves and storage containers are removed from the refrigerator and washed out with this solution using a soft sponge. Next, wipe the container with cotton material. Next, go to wash the inside of the refrigerator. After cleaning the device is left with the door open for a while. Moisture during this time will evaporate.

The outer part of the device also needs thorough cleaning. A soft sponge with a solution of water and detergent wipe the outer surface. Pay special attention to the rubberized layer that collects the most debris in the process of using the refrigerator. Further, it is still wiped with a cotton cloth. At least once a year, the device is moved away from the wall and the back is rubbed, and the web is removed from the grid. The floor under the fridge can also be washed.

Often refrigerators are decorated with magnets brought from different countries or cities. The decor is incredibly beautiful, albeit widespread, but dangerous, because when removing them from the surface there are a lot of scratches and marks. The front surface of the machine may be damaged.

After defrosting and cleaning, an empty refrigerator is connected to the power grid, which does not overload the compressor device. After some time, you can load products in the fridge.

Technology to accelerate the defrosting process

The defrosting procedure takes a fairly large amount of time, about half a day. The refrigerator, as was said before, should defrost itself naturally. But there are methods that have been used by mistresses for years. These methods, in their opinion, in no way harm their home assistant. Each hostess has the right to choose the way of defrosting. Non-traditional refrigerator methods include the following:

  • during use in the freezer can accumulate a whole block of ice. To speed up the process, use a bowl of hot water. Steam must come from the water. Put the folded towel in the freezer, put a bowl of water on the towel, close the freezer and wait. Later, the water in the bowl can be changed to a hotter one;
  • defrost the refrigerator using a fan or a hairdryer. The air flow is directed to the internal ice wall of the device. To defrost the entire inner surface, you need to change the direction of the air. The whole procedure will take about two hours, and the glaciation will completely disappear. Using a hair dryer will thaw the machine even faster than the fan, since The air from the dryer is much warmer. However, you will have to work hard and stand for some time with a hairdryer, directing it one way or the other;
  • there are unconventional methods and without violating the rules for using a refrigerator, i.e. avoiding extreme temperatures. In the freezer is placed a plate with salt, which will eat all the snowball. If the freezer glaciation is very strong, you can shower it all with salt, and the result will not take long. After ice fighting, it is recommended to thoroughly clean the inside surface of the freezer;
  • like salt, vinegar perfectly defrosts the ice. A plate of vinegar set in the center of the freezer. If the snow cap is large, vinegar can be sprayed over the entire inside surface of the freezer. Washing the freezer will also have to be rather scrupulous, since the acid tends to corrode the surface of the products.

In the course of their work, snow-ice coats are formed on the walls of the chambers of the refrigerator. It becomes more and more difficult for the compressor to keep the temperature set in the device. Therefore, regular defrosting of the device will allow extending its efficiency, preserving the cleanliness of the food storage place and avoiding the appearance of unpleasant odors.

The process of defrosting the refrigerator seems tedious and troublesome. And because each time the question arises how to quickly defrost the refrigerator, without any problems getting rid of frost, frost or "snow coat." There are several proven and effective ways to help solve such a domestic problem in record time.

When there is a question about how to defrost the Indesit refrigerator or a household appliance of a different brand of manufacturer, you need to understand that the basic defrosting rules will be identical. They include mandatory items, as well as some manipulations that are not recommended with the refrigerator.

Mandatory moments, how to defrost a refrigerator without harm to equipment

  1. Disconnect the instrument from the power supply.
  2. Remove all products, as well as maximize the equipment inside from the shelves, partitions, drawers.
  3. Move the temperature sensor to zero position.
  4. Leave the refrigerator and freezer doors wide open.
  5. Put an empty bowl inside the equipment, any water collection pan. Trays or plates should also be placed in the freezer to successfully eliminate the melt water when the automatic drain is not provided.
  6. Put under the fridge and on the floor thick rags, old towels to collect moisture.
  7. Wait for the moment when there will be no ice in the refrigerator and all the liquid will be collected.
  8. Dry the space inside the unit well, wipe the freezers with a soft cloth. Then dry the floor under the device and next to it.
  9. Turn on the equipment in the network, fill with boxes and partitions, set the sensor to the desired temperature, close the refrigerator.
  10. Wait an hour and a half, then place all the products in places.

When there is an idea how to properly defrost a refrigerator, it is necessary to remember some nuances that should not be made in the process of defrosting.

  • Do not use knives, metal and wooden shovels, other devices in order to quickly defrost the refrigerator compartment, clearing frost and frost. This will lead to traumatizing the surface of the device, will cause a rapid accumulation of ice afterwards, and can also provoke a failure of the equipment. It is permissible to use only silicone or rubber spatulas.
  • It is forbidden to put inside the refrigerator, and especially in the freezer itself, a container with boiling water. Such a sharp temperature drop eliminates the ice, but can cause damage to equipment.
  • It is not recommended to defrost the old unit or new equipment in the hot season. It is better to postpone the process at the end of autumn or winter.

Before the start of this process, it is always interesting how to quickly defrost the refrigerator compartment, especially in a situation where there are perishable or frozen foods. If you do not resort to the methods of quick defrosting, then the Samsung refrigerator or any other model will “thaw” for 6-8 hours. Often there is no such amount of time in stock, so you can speed up the process by resorting to some tricks.

Tips to quickly defrost a fridge:

  1. Place inside the device and freezers cups and saucers with warm water.
  2. If there is a two-chamber refrigerator No Frost, then in each freezer compartment you can place a heating pad filled with warm water.
  3. To thaw the ice faster, the inside of the refrigerator can be wiped with a thick cloth moistened with water that is not hot.
  4. When deciding to quickly and effectively get rid of the ice inside the Bosch technique, you can use a regular hairdryer. When choosing a warm airflow, direct the air stream inside the chamber, but do not put the dryer in the freezer or on the shelf. This can lead to a short circuit.
  5. Helps to speed up the process of dealing with frost inside the freezers of modern models of the refrigerator to heat the air in the room. This can be done with the included stove in the kitchen, heater.
  6. Another way to quickly defrost a refrigerator is to position a fan heater in front of it or an ordinary fan.
  7. The least effective way to quickly defrost is to use a vacuum cleaner. Here you can act in two ways:
  • including the function of "blowing" on the device, direct the flow of air inside the refrigeration chambers;
  • if the vacuum cleaner is for wet cleaning of premises, then, having brought it to a working condition, you can try to collect moisture and pieces of melted ice.

If the Samsung fridge, Bosh, Atlant has one or two solid freezers, then the question of how to get rid of frost usually does not arise after reading the step-by-step recommendations. But some home appliances have nuances that complicate the defrosting process.

Instructions for getting rid of the ice and "snow coat" of the Atlant Atlant with a single camera

Some models of this company have one freezer divided into compartments. Often, a large amount of ice and snow accumulates on the surface of the partitions.

Based on the main stages of defrosting, the chamber and tubes of the home appliance must be rubbed several times with a cloth cut dipped in the warmest but not hot water. With the help of the same fabric should be disconnected melted pieces of ice. Then walk inside the refrigerator with a silicone spatula, cleaning the residual frost. The last step - warm airflow with a hair dryer.

How to defrost a refrigerator with a drain system?

In this case, the defrosting principle will again be identical to the basic rules. The key difference lies only in the fact that the drain system must be opened. If possible, connect a fluid hose to it.

Defrosting: do or not

Modern models of technology are almost all equipped with a system of self-defrosting. It is for this reason that the question arises, is it necessary to spend time and energy on the defrosting process?

A new type of defrosting system is installed in refrigerators:

  1. drip typewhen excess moisture drains itself into a special pan and evaporates, therefore the question of how to defrost a refrigerator, it seems, becomes irrelevant;
  2. air type or No Frost ("no freezing"); using the air flow, getting rid of unnecessary frost occurs, thanks to which defrosting a No Frost refrigerator seems useless;
  3. mixed typeBoth mechanisms are involved in preventing the “snow coat”.

Do I need to defrost a refrigerator with one of these automatic systems?Yes, even modern models of devices need defrosting. And do not bother how to defrost the refrigerator No Frost, because the process is performed in the same way as for other similar household appliances.

The defrosting process is sufficient to perform once every 6-8 months. But the old models of refrigerators require cleaning from ice much more often, at least once every 2-3 months.

Why should defrost the refrigerator?

  • For cleaning inside the unit.
  • To extend the life of technology. As in the absence of manual defrosting condensate accumulates, capable of disabling equipment.
  • To save electricity. In the absence of proper care, the refrigerator needs more electricity to operate at full capacity.
  • For noiseless operation of household appliances.

To read the instructions on how to properly defrost a refrigerator, just watch the video:

Defrosting the refrigerator is not the most interesting process, but it is necessary for any model of this household appliance. Taking into account all the rules and nuances, as well as paying attention to the instructions for the machine itself, the defrost will pass quickly, easily and without negative consequences for the refrigerator.

In contact with

Whatever fridge you have, say, a modern Samsung with an auto-freezing system or an old Biryusa, you need to defrost it periodically.

  • How often should you defrost a refrigerator?  There are no strict rules in this matter, the main thing to focus on is the appearance of ice. A refrigerator of the old model without any auto-freezing system requires frequent defrosting - about 1 time per month. If you have a modern refrigerator with the No frost, Frost free or Full No Frost system (dual compressor), then one duty defrosting in half a year will be enough.
  • Why do I need to remove the frost?  A layer of ice, and especially a thick ice coat inside the freezer / refrigerator, not only complicates access to the products, but also makes the compressor work more with less efficiency, while increasing your electricity bill.
  • Why frost is formed?  The appearance of ice occurs due to the ingress of warm air into the refrigerator / freezer at the time when the door is open. If you notice that the ice coat is growing too fast, then most often the reason for this is damage to the thermostat or the sealing gum.

With the help of our step-by-step instructions, you can defrost any fridge - one or two-compressor, old or modern, with the function Noo Frost, Frost Fries (with a drip defrost system) or full frost, brands Atlant, Veko, Nord, Ariston, Samsung, Bosh, Gorenje, Lg, Liebherr, Whirlpool, Zanussi, Electrolux, Indesit, or Stinol.

Defrosting the refrigerator in 8 steps

Step 1. Adjust the temperature of the refrigerator to 0 degrees, then unplug it from the power and open the door wide.

  • How to properly defrost a refrigerator with two compressors? The principle is the same, the only difference is that its chambers can be defrosted in turns or simultaneously.

Step 2. Remove all food from the camera. It is good if you have planned the defrosting of the refrigerator in advance and were able to organize supplies so that among them there are no perishable and frozen products left. And if not? The following tips will help you to keep food during the defrosting of the refrigerator:

  • Take out products to the balcony (in winter);
  • Put the food in a saucepan and put it in a basin filled with cold water and ice;
  • Put the products in a thermopackage (isothermal package) with bags filled with ice cubes, and place it in a dark, cool place. Thermopacket can be purchased at a hardware store.
  • Thermopacket can be replaced by foiled polyethylene or any reflective insulating material that is sold in hardware stores. In this case, the products just need to be wrapped with ice packs.
  • If your refrigerator is a two-compressor, then you can defrost the upper chamber first and put all the products in the lower compartment, and then do the opposite.

Remove all containers, shelves and grids from the chambers as well. By the way, we advise you not to pull the products out of the refrigerator directly in containers, since the plastic may crack from their gravity.

Step 3. If your refrigerator does not have a tank for collecting melted liquid, put towels or several layers of newspaper sheets under it, and a pallet on the bottom shelf. Usually, this measure is required for older models of refrigerators, with modern technology water is drained into a special sump (most often it is located behind the refrigerator).

Step 4. Now it remains only to wait for the refrigerator to defrost. The natural process of melting an ice coat can take from 3 to 10 hours, depending on the thickness of the ice.

  • It is best to defrost the refrigerator in the traditional way - just leave it overnight.

But if you wish, you can speed up the process with the help of simple actions. First, let the refrigerator stand for half an hour just to stand, then choose one of the following methods for accelerated defrosting and start the practice.

Ways to Accelerate Defrosting the Refrigerator

  • Method 1. Put a heating pad filled with hot water in the freezer.
  • Method 2. Place a plate in the chamber, and a pot of boiling water on it. Change the water as it cools. Do not put pots of boiling water without a plate, so as not to damage the plastic. After 30-60 minutes of such a “bath”, the ice coat should begin to break off.
  • Method 3: Fill the spray bottle with hot water and start spraying the chamber walls with it. After 15 minutes or more, the ice will begin to break off.

Spraying ice with hot water is perhaps the safest, easiest and at the same time effective way to quickly defrost a refrigerator.

  • Method 4. Place a heater in front of the refrigerator so that the melt water cannot come into contact with it, and the warm air is not directed directly at the rubber seal.
  • Method 5. Can I defrost a refrigerator with a hair dryer? Yes, if you keep it at a distance of 20-30 cm from the walls of the chamber, distribute hot air evenly and do not aim it at the rubber gasket. And of course, do not neglect the observance of safety rules and completely eliminate the contact of the hair dryer with water.
  • Method 6. Dampen a rag in hot water and wipe it with ice. Repeat the procedure until the ice begins to break off.

Unwanted actions

  • Do not chop off, do not scrape and do not collect ice with a knife. So you can damage not only plastic, but also the channel under it, which is carried out by the refrigerant freon. In the event of a breakdown, you will have to do repairs - fill the canal with freon, and then solder it.
  • While heating the ice coat with a hair dryer or a fan heater, do not direct the flow of hot air directly at the sealing gum. Otherwise, it is dried and deformed. If this happens, warm air will constantly flow into the chamber, which will disrupt the operation of the refrigerator and provoke the rapid appearance of a new fur coat.

Step 5. Remove all melted water and chipped ice from the chamber with a rag.

Step 6. Take care of cleaning the chambers, shelves and containers by following.

Step 7. Using a rag and / or the same blow dryer, dry the walls of the refrigerator to prevent the formation of ice again. Then wipe the floor and the area around the appliance dry.

Step 8. Turn on the refrigerator. Wait until the temperature in the chamber drops to normal (it takes about 30 minutes) and proceed to filling the shelves with food.