The most striking deposits of lime are seen in our household kettles. It doesn't matter if we boil water in an electric or enamelled kettle, the gray-brown stone grows quickly inside. How to quickly clean the scale, so that the drinks that we drink are tastier and the whole suspension does not enter the body, we will definitely figure it out.
We will be interested in simple and affordable tools that will always be in our kitchen or in the nearest grocery store. It is equally easy to dissolve limescale deposits on the heating elements of any household appliance designed to heat water. Just in the kettle, the speed and degree of cleaning is visible, as they say, “with the naked eye”.
Where does scale come from?
Scale inevitably forms on the heating elements and walls of any vessel in which water is heated or boiled. Be it a kettle, or. Whatever the heating element (electric heating element) is made of and whatever quality we fill the water, whitish deposits will surely appear.
The rate of scaling and its color depends on what salts and minerals, and in what quantity, is dissolved in the water that you use.Sooner or later you have to think about how to quickly clean the scale inside the heating tanks and return home appliances to cleanliness.
On a note
Even distillate (distilled, that is, purified from salts by distillation, water), which is recommended to be poured into the iron reservoir, leaves a raid over time.
In industrial installations, softened water is poured into the systems. There are whole complexes of chemical water treatment. We do not have the opportunity to deeply soften the used water with coagulants. Only mechanical cleaning with household filters is available to us. And they, for the most part, catch only particles of sand, clay, microorganisms and other inclusions. But they do not make water soft, that is, they do not dissolve and do not remove the salts contained in it.
At home we have to dissolve lime deposits already on the fact of their occurrence. Not only that they are clearly visible and spoil the mood of the hostess, she is well aware that the health of the household does not improve. All this suspension will enter the body and will be unsuccessfully excreted by the kidneys.
Already for the sake of improving the well-being of loved ones it is worthwhile to attend to the elimination of this inevitable trouble. In addition, if you clean the kettle from scale in a timely manner, then the tea will become much tastier and more fragrant. With this fact will not argue even the most unassuming in food and drink people.
What and how limescale dissolves
So, we have established that limescale builds up in any kettles, regardless of whether it is electric or enameled. It also does not depend on the material from which the heating element is made in electric kettles. It will not save from scale, even if it is gilded.
In addition to the obvious harm to human health, deposits on the heating elements and inside the heating vessel are fraught with the fact that your kettle will burn before it is supposed to. You have to buy a new one, and a good electric kettle is not so cheap. Yes, and extra spending on unplanned purchases of household appliances in our plans are not included, right?
The fact that a layer of scale just three millimeters will increase the time of heating water and increase energy consumption by 25%.
What not to do to get rid of scale
Even if you have a simple kettle without a heating element, it is not necessary to warm it without water on the fire so that the layer of scale falls off. Cork, most likely, will disappear, but only with cracked enamel. And this method will not completely remove the scum. There will be pieces that need to be otkovyrivat improvised tools. Damaging the kettle is very easy.
Shop antiscale is also not a very good way. They contain alkali, which is difficult to wash out of the kettle without a trace. Some amount of it gets into the drinks, and therefore in our body.
Therefore, the most acceptable for us are the means that we use in food in small quantities. These include:
- Citric acid or whole lemon (lemon peel is also quite good).
- Vinegar. As an option, but the kettle will have to be washed more thoroughly. Boil and pour clean water, too, will have more than once. This is necessary to get rid of acetic acid permanently.
- Coca-Cola, Sprite and Other Thermonuclear Drinkswhich we, alas, sing our children and ourselves.
Special attention
These so-called drinks perfectly eat off not only scale, but also rust from the metal bumpers of cars. And old sediments in the toilet. Think carefully about whether to drink these drinks and burn the gastric mucosa, since even persistent deposits it eats away "on time".
Win-win and the easiest way of these - regular lemon or lemon juice from lemon. Works fine and lemon sliced. So what, what, and lemon juice in the tea has not hurt anyone. Although the dissolution of lime salts occurs after boiling water with it right before your eyes.
The secret is that we do not pour glasses of lemon juice into ourselves, unlike Coca-Cola and soda. Her we can pour in a bottle, with all the consequences.
How to remove limestone with citric acid
- Half a pack of citric acid (about 2 tablespoons) or sliced lemon throw in a kettle filled with water.
- Water is poured to the maximum possible level and set to boil.
- Electric kettle will turn off by itself. In the kettle on the stove you need to wait for the boiling “white key”.
- Allow to cool with water. This is necessary so that the process of dissolving limescale continues even after heating.
- Boil again and let stand again. Time depends on the thickness of the layers and your desire. You can even leave for the night, it will only be better.
- Now it only remains to rinse the kettle and wash it outside, to heighten the effect.
- Boil clean water in it and pour. So you get rid of the slightest remnants of lemon inside the kettle.
In a transparent teapot it is clearly seen that almost nothing remained of scale. And the heating element is clean and shiny. After boiling twice with an interval of 15 minutes.
Everything. On this all the manipulations are finished. The kettle is clean from the inside and it took about 20 minutes to get rid of the scale. And it is no longer necessary to clean the scale. No hands, no brushes, no washcloths. She just disappeared by herself.
Efforts minimum, the result is impressive. Drink on health delicious, fragrant tea without suspension and taste. Along the way, we save energy on water heating and the kettle lasts longer, and it looks like new.
Conclusion and conclusions
Try to pour into the kettle and use only high-quality water for cooking. Filtered, spring (from reliable sources), or bottled from a bona fide manufacturer. Those that are sold in stores, also need to check and check. And preferably in laboratory conditions.
It so happened that the planet is becoming less suitable for drinking water. What flows from our taps, pour into a glass and drink, as it used to be before, is risky. The condition of the pipes and the sources from which it gets there leave much to be desired.
So we are forced to install multistage filters, purify water in all available at home ways. And only after that we can drink it and cook from it. Save on water more expensive.
And of course, in order to always have the most delicious tea, coffee, compote or any other drink in your cup, get rid of lime deposits in the kettle more often.
Fortunately, we now know how to clean scale quickly. And means for this purpose are necessary simple and accessible, from kitchen stocks. There is no need to pour chemistry and antiscale in the kettle. This task is great to handle lemon or citric acid. Verified
Instruction
The easiest way is to buy any “antiscaleable” in the store and clean it according to the instructions. It is worth such a tool, as a rule. But, if you want to protect your health from accidental ingestion of chemicals, it is better to use natural remedies.
Boil the resulting solution and leave for at least two hours, and if possible, overnight.
After pouring the solution, rinse the kettle thoroughly with running water and boil again to remove residual vinegar and scale.
In addition to acetic acid to combat scale you can use citric acid - 1 tablespoon to 1.5-2 liters of water. Pour the acid into the kettle, fill it with hot water and leave it for 15-20 minutes. Boil the solution is optional. If the raid was not very strong, then after the specified time the kettle will shine like new.
In the absence of citric acid and vinegar in the house - do not despair. This may be unexpected, but in the past, the grandmothers were disposed of with the help of the ordinary!
Take a clean potato peel, cover the bottom of the kettle with them and add 1.5-2 liters of cold water.
Drain the cooled water and rinse the kettle well with tap water.
If you are still unhappy with the result, try another very extravagant tool.
Buy in the store "Sprite" or "Fanta" and shake it until the disappearance of gases.
Pour the drink in the kettle, heat and leave overnight.
note
When using industrial anti-scale agents, keep in mind that they affect not only scale, but also the inner surface of the kettle, destroying its structure. Therefore, try to use industrial means as little as possible.
Helpful advice
Citric acid has an important advantage over vinegar: it does not have a pungent smell.
The main way of dealing with scale is to soften the water itself. Use a filtration and water treatment system.
Sources:
- how to clean the electric kettle with citric acid
- 5 easy ways to descale the kettle
From poor-quality tap water appears on the heating elements of electric kettles. Often the plaque leads to damage to the device. To remove rust or whitish plaque, you can use some tools that destroy scum and contribute to its separation from the walls of the kettle.
Instruction
The safest way to clean the heating element is citric acid. Pour water into the kettle, add about 50g of lemon, and boil water, but watch that when boiling the liquid starts to foam strongly and can spill over the edges. It is better to turn off the kettle when it starts to boil. Let be scum soak a little, then boil water again and rinse the instrument. If not all plaque is removed, repeat the procedure.
You can also use acetic acid for descaling. Pour cold water into the kettle, then gently pour in the acid. At 1.5 liters of liquid you need to add about 30g of essence or 50g of acetic acid. Boil the water, try not to breathe vapors, they can burn the airways. If the patina is too thick, leave the kettle to soak for a day. But remove it from the site, otherwise someone may inadvertently pour tea with water and vinegar. Boil again in the morning and rinse the appliance.
Often, in order to prepare hot drinks, running water is boiled in the kettle, which has high hardness due to salt impurities. Salt when heated precipitate, which is deposited on the walls of the tank, forming over time a dense plaque. The article will look at how to clean the kettle from scale in the home.
If the dishes are not cleaned, the scale prevents the heating of water, impairs the cooling of the heating element, which leads to overheating and increases the risk of failure of the device.
The salt intake when systematically injected into the human body leads to the development of various diseases, including gout, osteochondrosis and stones in the urinary system, therefore regular cleaning of the kettle is required. How to perform the procedure correctly and safely?
Safety and Preparatory Stage
- Can not be used for cleaning synthetic drugs used for washing machines. Only products created for kitchen equipment and appliances, the surface of which comes into contact with food, will do. After use, chemicals and abrasives can get into drinking water, as they are difficult to remove from plastic and metal elements.
- For cleaning the outer surface, you can use household chemicals without abrasive inclusions. It is better to forget about metal sponges or brushes.
- Unplug the appliance and cool it before cleaning the kettle. To avoid deposits in drinking water, the kettle is supplied with a filter. It is located in the spout and also requires cleaning.
- Never immerse the appliance in water or any other cleaning fluid.
Folk remedies against scale
If the kettle is covered with too much a layer of scale, then not all means will help to achieve the result the first time. However, you should not get upset, there are effective folk methods that do an excellent job with bloom and cost practically nothing.
Vinegar
To prepare the solution will need 9% table vinegar and water. In the kettle dial ⅔ of water from the maximum level. Then add vinegar to the max mark. Boil the solution, then leave to cool.
If 9% of vinegar was not found, use vinegar essence (70%). Pour water into the kettle to the max mark, then add 2-3 tablespoons of essence. Work with the tool very carefully, avoiding contact with mucous membranes, so as not to provoke a chemical burn.
At the end, rinse the device thoroughly with water. If it was not possible to remove all the scum from the first time, repeat the procedure. The disadvantage of the method is the sharp smell of vinegar (especially in the case of essence), so the room should be well ventilated.
Video Tips
Lemon acid
The solution is prepared at the rate of 10 grams of citric acid per 1 liter of water. Usually, the acid is packaged in bags of 25 grams, so for a standard kettle you will need one bag.
The resulting solution, as in the case of vinegar, bring to a boil. After boiling, turn off the kettle, as the solution may start intensive foaming. Allow the kettle to cool, drain the solution, rinse thoroughly with water. Repeat the procedure if necessary.
Baking soda
If the kettle has not been cleaned for a long time and the layer of scale is large enough, then before carrying out one of the above procedures, it is necessary to boil water with baking soda in it. The solution is prepared at the rate of 2 tbsp. tablespoons of soda for 1 liter of water. This preparation will give a more active reaction with the acid and increase the likelihood of purification.
Coca Cola
The method is suitable for any kettle except electric. Sweet carbonated water must contain orthophosphoric and citric acid. Suitable for cleaning are considered to be Coca-Cola, Fanta or Sprite. They clean scale and do a great job with rust.
Before starting the procedure, open the lid and release the gas from the beverage. Pour into the kettle to medium level, bring to a boil and leave the liquid to cool. Drain and rinse the inside thoroughly with water.
Running cases require a combination of several methods. The kettle with a strong patina can be cleaned in the following way:
- Perform the first boiling with water and soda, drain the liquid and rinse the kettle.
- Perform a second boil for half an hour. To do this, add 1-2 teaspoons of citric acid to water and after boiling, rinse the container with water.
- Third boil with water and vinegar.
At the end of the procedure, the scum will become loose and without any problems will lag behind the walls. After that, thoroughly wash the device again to prevent acid and loose residue from entering the future drink.
Purchased products and chemicals
If you need to quickly and easily remove scale from the kettle, use specialized tools sold in stores. Such tools are effective and act fairly quickly.
- "Antinakipin" - is on sale, inexpensive, quickly achieved the desired result.
- "Scale remover" is a cheap and effective remedy.
- “Major Domus” - a proven agent in liquid form, unfortunately, is not found in all stores.
It is quite simple to use scum powders: put them inside the kettle and cover with water. After boiling, drain the water and rinse the device thoroughly from the inside.
Custom solutions
If there are no ingredients to clean the house, try the cucumber pickle. Pour it into the kettle and boil it for 1-2 hours. Instead of brine, you can also use whey or sour milk.
On the Internet there is a method of cleaning apple peel. Only sour apples are suitable, the rind of which is filled with water and boiled in a teapot for an hour.
After the procedures, the kettle is thoroughly washed.
The best way to solve the problem is to prevent the occurrence of scale.
- Clean the inside of the sponge with a thin layer of scale after 1-2 times using the kettle.
- Boil pre-filtered water.
- Do not leave boiled water for a long time in the kettle, immediately pour the excess.
- Conduct a descaling monthly to prevent the deposit from becoming too thick.
Cleaning and maintenance procedures will protect the kettle from scale, extending the life of the heating element.
Enameled kettle - very beautiful, comfortable and the most common type of kitchenware. Even if there is a home water filtration system in the kitchen, it is completely impossible to avoid solid deposits on the walls and the bottom inside the kettle.
The filter significantly reduces the concentration of impurities and salts of calcium and magnesium, but over time, in the process of heating water, an insoluble precipitate is still formed, causing the quite expected question - how to remove scale in the enamelled kettle.
During the first heating in a vessel, salts contained in water precipitate and first form a loose base. With each further boiling, it is increasingly compacted, creating a strong layer of plaque.
The most important argument is to take care of your own health. The smallest particles of sediment, getting into the cup, and then clog the intestines in the body and lead to many unpleasant diseases.
How to descale the enamel kettle
The problem is quite common and was relevant many years ago, when there was no talk about filters designed to purify water.
To date, there are three answers to the question of how to clean the enamel kettle from scale:
- Mechanical method;
- The use of special tools for cleaning appliances;
- Use valuable knowledge in order to clean up at home.
Mechanical - at first glance, the easiest way to remove formations using a metal brush and cleaning paste. With sufficient intensity, the mechanical action will remove even the most stagnant layer of solid deposits.
This method is not without drawbacks:
- The process of exposure takes a lot of time and requires a lot of effort;
- Together with the coating, the coating is also removed, forming cracks;
- In the future, scale in these defects will be fixed stronger, and it will be more difficult to remove it.
Household chemistry departments are full of a variety of cleaning products, the instructions of which clearly describe how to descale the enamel kettle. As a rule, the names speak for themselves - "Antinakipin", "Antinakip" and others. In the composition of these powders are acids, by means of which the solid precipitate is removed. It is easy to use them, following the instructions on the package.
Homemade recipes
Limescale deposits are successfully removed by natural means, which can be found in the kitchen of each housewife:
- Lemon acid;
- Acetic essence, table, apple vinegar;
- Baking soda.
Citric acid is an amazing assistant in how to descale the enamel kettle. Excellent solubility, non-toxicity and the property of effective removal of solid deposits bring crystalline powder into the leaders of home anti-scale agents. In order to remove scale in the electric kettle, you can use the same tools.
To do this, it is necessary to dilute five tablespoons of citric acid in two liters of water, and bring the solution to a boil. It is not necessary to boil and after 15-20 minutes you should make sure that the process of peeling is successfully completed.
If the desired result is not achieved, it is necessary to clean it again with citric acid. Before you drain the old solution and rinse the kettle, you need to cool the vessel, otherwise the enamel will crack.
After all solid deposits have moved away from the walls and bottom, it is necessary to wash the vessel with a soft sponge and loosened particles (if present) can be easily removed. In order to remove citric acid residues, boil clean water 2-3 times.
Vinegar - acts on a similar principle. Acetic acid actively breaks up solid deposits.
- For 2 liters of cold water you will need a glass of 9% vinegar;
- Leave the mixture for half an hour;
- Then bring to a boil and boil for 5-10 minutes;
- Thoroughly rinse the kettle under a strong stream;
- Boil fresh water “empty” several times.
The only disadvantage of vinegar - strong peculiar smell. But at the same time, you can also clean the stainless steel kettle.
Vegetable skin
Potato peel contains a large amount of organic acids, even more than in the tuber itself. It is the rind that helps to solve the problem, than to remove scale in the enameled kettle.
To do this, the cleaning of two fruits is put in a vessel, filled with water and boiled over low heat for 1-1.5 hours. It should be noted that the deep layer of solid particles only soften slightly, but will not dissolve completely.
With the same purpose using apple and lemon peel.
Some recommend using carbonated drinks instead of the indicated means (Coca-Cola, Sprite, etc.). They are really able to cope with a small layer of gray plaque and all because carbon dioxide is added to form weak carbonic acid.
The concentration is small, so this method is irrational, due to the high cost of drinks.
Cleaning enamel kettle from scale using any selected method is carried out in several stages and continues until a satisfactory result is achieved.
The cleaning procedure should not be delayed - it will be a good preventive measure.
It is more expedient to wash the kettle every two weeks and spend 5 minutes on it, rather than fight the old deep-seated scum.
How to deal with old scale?
Let's figure out how to remove scum soda. Soda in this case will be one of the stages of the fight against the old raid. Completely she did not remove it, but only soften the eaten areas.
- Pour into a kettle of water and bring to a boil;
- Add 2-3 tablespoons of soda;
- Stir and allow to cool;
- Bring to a boil again and drain the water;
- Without washing, pour a new portion of water and add two teaspoons of acetic essence or a bag of citric acid;
- Let stand 30 minutes.
After this procedure, solid deposits easily move away from the walls and bottom. To achieve maximum effect, it is necessary to wash the kettle with a soft sponge, rinse well and boil clean water in it for 2-3 times.
Video on how to clean the enamel kettle from scale
Someone noticed that the kettle, like the stove, was the face of the hostess. Therefore, each of us should know how to clean the kettle from scale.
Where does scale come from?
The composition of drinking water includes a huge amount of minerals and salts. Whatever traditional methods and modern filters you did not clean it, even a small percentage of different impurities still remain. During the heating of the sodium salt, magnesium forms a lime scale that eats into the walls of the dish and does not want to voluntarily leave it.
This bloom covers any kind of material, so all housewives have to clean their kettles.
Why get rid of scale
- Lime deposits have a low thermal conductivity, which causes water to boil more slowly.
- If the kettle is electric, and it is too lazy to clean it, plaque quickly disables the heating element.
- Because of the scale water becomes tasteless. And if it boils for a long time, it’s also muddy.
Effective ways to combat scale
How to clean the kettle using simple tools that are found in every home.
Limescale stripper
- Type a full kettle of water, pour 1-2 bags of citric acid (depending on its volume and thickness of scale). Boil.
- Let the solution cool a little, in the meantime, the acid will have time to eat the plaque. Drain the liquid.
- Again boil the water with citric acid. Again, drain the liquid and thoroughly rinse the kettle.
- Citric acid can be replaced with vinegar - 100 grams per liter of water.
We remove a thick layer of scale
If the solution with citric acid did not give the expected result, try another way:
- In 1 liter of water, dissolve 2 tablespoons of baking soda. Pour this solution into the kettle, boil for about half an hour.
- Drain the resulting liquid. Pour water and add a tablespoon of citric acid, boil.
- The third time, pour water with vinegar (the thicker the layer, the more vinegar), boil for 30 minutes.
- After such a triple treatment, the scum becomes soft and easily lags behind the walls. Remove it with a kitchen sponge or wooden spatula. Rinse the kettle thoroughly, boil clean water for reliability and pour it out.
We try to clean the "Coca-Cola"
- Release all gas from the beverage before use.
- Fill "Coca-Cola" half teapot, boil.
- Pour the contents, rinse.
- Some claim that "Fanta" and "Sprite" for this case also fit.
Is your kettle shining clean again? Isn't it time to drink a sweet tea? Have a good tea and pleasant conversation!
