Repair dents on the front wings of the car. Complicated damage with kinked ribs. To repair such damage requires the removal of the wing flaps. Dents of this nature need to be able to start properly, especially with aluminum.




Dent on the front left wing with a jammed stiffener. To repair the dents on the wing needed to remove the liner. By the time repair without painting took about 4 hours. The cost of this wing repair was 8000r.

Audi car Dent on the wing



Dent on the rear left fender. To repair the dents on the wing needed to remove the liner and wheel. The time spent on removing dents without painting about 4 hours. The cost of straightening the dent on the wing was 7,000 rubles



Dent on the front left wing with a jammed stiffener. For repairing dents without painting needed to remove the liner. Time spent on the repair of the wing without painting about 4 hours. The cost of removing dents from the wing was 7500 rubles



Dent on the rear left wing, not a simple dent with a crease. For repair it was necessary to remove the lantern. The time spent on removing the dent is about 5 hours. The cost of repairing a dent on the wing was 8,000 rubles.



Dent on the rear right wing with a strong crease stiffener. To repair without painting the wing needed to be removed. Time spent on the repair of the wing about 4 hours. The cost of repairing the wing without painting amounted to 6000 rubles



Dent on the front right wing with damage to the stiffener. For repair it was necessary to remove the liner. Time spent on straightening the dents on the wing about 2 hours. The cost of removing dents without painting 4000 rubles

Car Volvo Dent on the wing



Dent on the rear right wing. Time spent on repairing dents without painting about 40 minutes. The cost of removing dents on the wing was 2000 rubles

Car Mercedes-Benz Dent on the wing



Dent on the front left wing, the difficulty is that it is aluminum. For repair it was necessary to remove the liner. Time spent on repairing dents without painting about 4 hours. The cost of repairing the wing without painting 7500 rubles



Dent on the front right wing, stiffened rib. For repair it was necessary to remove the liner. Time spent on repairs about 5 hours. The cost of repairing dents without painting 7500 rubles

Volkswagen car Dent on the wing



Dent on the front right wing with damage to the stiffener. Not simple damage due to the complicated design of the wing. Time spent on repairs about 3.5 hours. For repair, it was necessary to remove the liner and molding (wing cover). The cost of repairing dents is 7000 rubles.

Toyota car Dent on the wing



Dent on the front left wing with damage to the stiffener. To correct the dent it was necessary to remove the liner. Time spent on repair dents 2.5 hours. The cost of work is 6000 rubles

Toyota car Dent on the wing



Dent on the rear right wing with damage to the stiffeners. To repair the dent it was necessary to disassemble the entire sidewall of the wing. Time spent on repairs about 5 hours. The cost of repairing dents without painting amounted to 10,000 rubles

Car Renault Dent on the wing



A dent on the front right wing, a sharp dent on a stiffener. For repair it was necessary to remove the liner. The time spent on repairing this dent was about 2.5 hours. The cost of removing dents 3500 rubles

Mazda Dent car on the wing



Dent on the front right wing. Chopped dent with stiffener damage. To repair the dents on the wing needed to remove the liner. Time spent on the removal of this dent about 4 hours. The cost of repairing damage was 9,000 rubles.

Toyota car Dent on the wing (board)



Dent on the right side, extensive with damage to the ribs. To remove this dent it was necessary to remove the liner. Time spent on repairing dents about 5 hours. The cost of repairing dents was 13,000 rubles

Car Nissan Dent on the wing



Dent on the front left fender. To repair without painting the wing needed to remove the liner. Time spent on the removal of dents on the wing about 3 hours. The cost of repairing damage amounted to 6500 rubles.

BMW car Dent on the wing



Dent on the front right wing, stiffened rib. To repair the dents needed to remove the liner. By the time the repair took about 2.5 hours. The cost of removing dents on the wing was 4500 rubles



Dent on the front right wing, for repair it took to remove the liner. Time spent on the repair of this dent about 1 hour. The cost of repair is 4500 rubles

Ford car Dent on the wing



Dent on the rear right wing, stiffener damaged. To remove this dent it was necessary to remove the lantern. Time spent on repairs about 4 hours, the cost of repair 8000 rubles

Ford car Dent on the wing



Dent on the front left wing, stiffening ribs badly damaged. For repair, it took to remove the liner, time spent on repairing these dents for about 5 hours, cost 7000 rubles

Car TOYOTA Dent on the wing



Dent on the front right wing, stiffener badly damaged. To remove this dent it was necessary to remove the liner. Time spent on repairs about 3-4 hours, the cost of repairing dents 6500 rubles

Volkswagen car Dent on the wing



Dent on the rear left wing, stiffener badly damaged. To fix the dent, it was necessary to remove the flashlight and trunk lining. Time spent on repairs about 3 hours, the cost of repairing 6000 rubles

Chevrolet car Dent on the wing



A dent in the rear right wing is a rather unpleasant room for repairs. To repair this dent it was necessary to remove the lantern. Time spent on repair about 3 hours, the cost of repair 4000 rubles

Car Hyundai Dent on the wing



Dent on the rear right wing, not much stretched metal. To remove this dent it was necessary to remove the lantern. Time spent on repair about 3 hours, the cost of repair 4000 rubles

Car Kia Dent on the wing



Dent on the front right wing, stiffener damaged. For repair it was necessary to remove the liner. Time spent on the removal of the dent in about 2 hours, the cost of repair 4500 rubles

Car Hyundai Dent on the wing



Dent on the rear right wing, stiffener badly damaged. For the repair it was necessary to remove the lantern and the trunk lining. Time spent on repairs about 5 hours, the cost of work 9000 rubles

Mitsubishi car Dent on the wing:



Dent on the front left fender, very serious damage. For repair it was necessary to remove the liner. Time spent on repair of this damage about 5 hours, the cost of 8000 rubles



Dent on the rear left wing, in order to get to it, it was necessary to remove the wing casing in the trunk, as well as to remove the left lamp. Time was spent about 3.5 hours, the cost of removing dents 5,000 rubles.

Car Chevrolet Dent on the wing:



Dents on the front right wing (sharp), not simple. For repair it was necessary to remove the liner. Time was spent about 2 hours, the cost of 3500 rubles.

Honda car Dent on the wing:



The dent on the rear left wing was made (for painting) so that the putty layer was minimal when painting. It was necessary to remove the wheel, liner and drill a hole for work between the two metals. Time spent about 3 hours, the cost of 3000 rubles.

Volkswagen car Dent on the wing:



Dent on the rear left fender. Difficult to repair, stiffener heavily jammed. It took to remove the wing trim in the trunk, just remove the flashlight. The time spent on repairing this dent was spent about 6 hours, the cost was 11,000 rubles.


Dent on the rear right wing, the difficulty is that stiffener is stiff, as well as the thickness of the metal, all the same Toyota Tundra. It was necessary to remove the flashlight for repairs, time spent about 4 hours, cost 7000 rubles.



Dent on the rear right wing. The difficulty lies in the double metal, as well as near the neck of the gas tank. It took to remove the bumper and flashlight. Time spent about 4 hours, the cost of 6000 rubles.

Toyota car Dent on the wing:



Dent on the rear right wing (arch). For repair it was necessary to remove the liner. Time spent about 3 hours, the cost of 4500 rubles.

Car Volvo Dent on the wing:



Dent on the rear left wing, for repair it was necessary to remove the flashlight and wing trim in the trunk. Time was spent about 5 hours, the cost of 9000 rubles.

Car KIA Dent on the wing:



Dent on the front right fender, stiffeners jammed. It took to remove the liner and turn signal. Time spent about 3.5 hours, the cost of 6000 rubles.

Car Hyundai Dent on the wing:



A dent in the rear right wing, deep enough, just touched a stiffener. For repair it was necessary to remove the lantern and the wing trim in the trunk. Time spent about 4.5 hours, the cost of 8,000 rubles.

VAZ Dent car on the wing:



The dent on the front left wing, the hall is quite strong, the gap between the wing and the hood has decreased. For repair it was necessary to remove the liner. Time spent on repairing the dent on the wing took about 3 hours, costing 4,000 rubles.

During the operation of the vehicle, scratches, chips and dents appear on the body. The reason for their appearance can be both negative environmental factors and careless driving. Chips and scratches paint over. Repair and extrusion of dents on the machine perform using various methods and devices to eliminate metal jams.

Before you straighten a dent in a car with your own hands, you need to know what types of damage exist. Dents on the car have a different shape and degree of damage. Small defects tend to appear on the roof and hood of the car due to hail, and small stones. Medium and large metal breaks are a direct result of sloppy driving. Such dents on the car body can have a complex shape.

If the paint on the site of a large crease was covered with cracks, and began to fall off, then, in addition to eliminating dents, you will need to restore the paintwork. Otherwise, on the part of the body where the damage occurred, corrosion centers are formed.

Ways to remove simple dents on cars

Repair small dents, performs without repainting the damaged area. Defect repair is performed using PDR (paintless dent repair) technology, that is, without repainting the part being repaired. To perform the work apply:

  • Magnets. Allow to level small damages of a body. under the device enclose a small piece of lint-free cloth.
  • Adhesive applicator, fixture is attached to the car body with glue. After the adhesive has dried, the specialist slightly pulls the applicator in its direction, thereby leveling the body.
  • Suckers, allow you to perform the correction of simple defects. The vacuum pulling method removes metal wrinkles formed after small stones hit the machine, hail and icicles fell.
  • The building hair dryer, with the help of a tool, eliminates defects having a different shape. Warm air is blown over the damage, then it is immediately doused with cold air from a can.
  • Hooks. These devices are useful for drawing out hidden parts. They take out the box, and podshtampovki from hidden parts of the surface of the body.
  • Chipper It is cigar-shaped, and is intended for leveling metal bent outward.
  • Rubber hammer. On the reverse side of the damaged area establish a rubber substrate. Gentle blows level the surface. The way to remove dents on the car is applicable for both small and deep defects.

Also, the list of necessary tools include a set for leveling defects Pops a Dent. It includes nozzles, plastic bracket, glue. Repair is performed as follows:

  1. The center of the damaged area is carefully degreased.
  2. Heat adhesive composition. To do this, the glue rod is inserted into the gun, and connect it to the mains.
  3. The heated composition is applied to the nozzle of rubber, gluing it in a circular motion to the center of damage.
  4. After 2-3 minutes, attach the bracket to the overlay.
  5. Lamb brace wind on the nozzle until the defect is eliminated.
  6. 5 minutes after completion of work, the device is removed from the body.

The use of special equipment Pops a Dent is advisable with the frequent occurrence of dents on the car body. If defects of this plan appear rarely, it will be more profitable to use other technologies for stretching the damage.

How to straighten a heavy dent with your own hands

To eliminate the deepest dent, use shock substrates of different shapes, and hammers. Spoons are used as counterfeit tools. They have a different shape and size, are applied depending on the type of damage.

In the center of the damage the metal is thinner than at the edges. Before straightening, it is necessary to tighten the iron in the center of the defect. To do this, use a gas burner. Next, perform the alignment of dents.

After rough alignment of the defect, it is covered with a putty.

Repair dents with a jack

To extrude a dent in a car body with their own hands, a jack will help. The device is used to eliminate deep damage on the wings of the machine.

Before work, dismantle the front turn signal and headlight. From the side of the dent, the jack rests against the heel (a rubber bar is preliminarily placed under it), the device lever should rest against the opposite edge of the opening. The operation is stopped after straightening the defect, and the damaged area is covered with putty.

Removing dents on the car using a reverse hammer

Straightening dents using a reverse hammer, is performed when the driver has difficulty accessing the injury site, or the recovered parts cannot be dismantled. Such repair of body dents usually requires the subsequent painting of the reconditioned part. To straighten the dent perform the following steps:

  • Clean, dry and degrease the surface to be repaired. Remove traces of corrosion.
  • One end of the reverse hammer is attached to the damage center. Perform the operation using a special sucker or applicator.
  • Perform editing by means of gradually increasing blows of a small weight on the handle of the hammer.
  • After the restoration of the exterior of the body is completed, the hammer is disconnected.

The applicator or suction cup is effective for straightening the body only if the damage is not serious. In the presence of deep and complex defects, the hammer is welded to the surface, or clings to the technological holes with the help of special hooks.

Straightening

The process of removing a dent in a car and repairing a local part of the body is called straightening. If you have a certain experience and time, you can do the work yourself using the following algorithm:

  1. Wash and dry the work surface.
  2. Degrease damage.
  3. Carry out body repairs.

Straightening minor damage can be carried out without subsequent staining of the damaged area. With the help of reverse hammers, hooks, construction hair dryer, suckers and applicators, rubber hammers eliminate the defect.

If you need to fix a deep dent on the car, accompanied by wrinkles, peeling paint and a metal break, then use the following tool:

  1. Hammer and anvil of various shapes and sizes.
  2. Spoons.
  3. Jack.
  4. File.
  5. Welding machine.
  6. Grinding device.

Anvils apply dents to the outside, and a rough alignment of the surface is carried out from the center by careful strokes. Spoons act as a substrate for a percussion instrument, but they are used to eliminate defects that appear in hard to reach places. After leveling, inspect the repair area. If there are gaps in the metal, they are welded together. File remove the extra bumps. Next you need to putty the body, to align the working surface. The processed place is ground, covered with a primer, painted and polished.

Proper putty

Before you putty a car body with your own hands, you need to conduct training. This will help avoid visible defects after painting the car:

  1. Grind and remove extra metal bulges.
  2. Degrease and clean the treated surface. In some cases, the operation is performed several times.
  3. Cover the straightened spot of damage by applying the putty evenly in several layers.
  4. After it dries, the surface is ground. It is important to ensure that the deposited layer is flush with the rest of the car body.
  5. Put a primer in two layers.
  6. Paint the surface with the spray gun. Apply varnish and polish the surface.

Replacing a part or part thereof

If there is more serious damage, removing dents will not help to restore the integrity of the part. In this case, the body element, or its most severely damaged part, is changed to a new one. When replacing, you need to find a part that is identical to replaceable. If a specific area is being replaced, the patch is cut out of the same metal. Then it is welded to the restored parts.

Minor damage to the body, chips, scratches and dents on the car can be repaired by yourself without repainting. Previously damaged parts of the case are subject to restoration. If paint cracks, breaks and kinks appear, repair without painting will fail.

To straighten dents without painting is quite difficult if there is no practical experience. The article reveals the main points of this technology.


The content of the article:

Dents on the car, which have no damage to paint and varnish, rather cause loss of aesthetics, rather than bring real harm. However, the presence of one dent, and after it the appearance of another can become more serious damage with the press.

When it is possible to straighten dents without painting

Paintwork, in the case of this technology, must meet certain requirements. The whole process involves multiple manipulations associated with changing the shape of the metal structure. The applied paint must be plastic and durable at the same time. includes compounds based on polymers, which made it possible to improve the strength properties of the coating. As a result, PDR technology is more than relevant.

Paint on cars produced in the early 2000s, when changing the shape of the metal cracks. In this regard, straightening damage without applying a new layer of paint is necessary. PDR technology is not used if the paintwork is damaged, or restoration work has already been carried out at the deformation site.

Only those dents that have a more or less complete structure, i.e., a smooth form, without bends, are subject to recovery. Problems with repair do not deliver the size of the dent, but its depth. For example, a shallow dent on the hood, but a large one in diameter, straightens more easily than in the opposite case.


Despite the effectiveness of the system, it is not possible to restore the integrity of the surface with a very deep dent. In such cases, the metal is exposed to excessive exposure, as a result of which its shape changes dramatically, and, in most cases, the paint cracks without the possibility of recovery.

Of particular importance in neutralizing the effects of damage are the location of the dents and the presence of reinforcing ribs. If a dent appeared on a part of the body where internal work is impossible, then it is very difficult to remove the damage. These are mostly very small areas.

Correct the situation in case of skewing the body is impossible. To do this, it is necessary to restore the integrity of the entire enclosure.

Tools for aligning dents on the body


The market for automotive products is quite rich, on, of various kinds, professional devices. However, the cost of such equipment is quite high. Consider tools and equipment that are widely available, not high in price.

To heat the paintwork it is enough to use a hairdryer, ordinary or building. It is required that the paint be more plastic and not cracked. If the weather is summer, the temperature is high, then you can do without it.

Vacuum adhesive equipment for dents

These devices are necessary if there is no access to the inside of the damaged area.


The technology of vacuum hoods is relevant in the initial stage of restoring the integrity of the surface, when the dimensions of the deformation are large enough. To carry out the work properly applied suction cups.

To glue the fungi to the damaged surface, a special gun is used, filled with glue. All the necessary kit can be purchased at the hardware store.

For carrying out manipulations to restore the concave surface, fungi are used. Their job is to stick to the surface and tear it off. In addition, you can use devices made, for example, from the legs of plastic chairs.

Use hooks

It is necessary to prepare hooks of various shapes and sizes. Hooks can be made of strong wire or durable reinforcement. The main thing that the material was solid. Low hardness will not allow to perform the work properly, they will periodically bend. Increasing the length of the hook must take care of its hardness. Hardened steel is great for this. These devices are used in the case of availability of the inside of the body area, through special holes.

Core application

Tools are used at the beginning of repair work, and at the end. For the manufacture of cores, you can use plastic or wood. Their shape should be different. Rounded, applied on large dents. Minor damage straightened cores more obtuse shape.

Restoration of coating integrity without painting


The first is the preparation. If there are special holes, then access to them is more free. It is necessary to insert hooks. The damaged area must be wiped and heated with a hairdryer. Warm metal is more plastic, and cracking paint is almost impossible.

A rounded core dent is machined around the perimeter. Inflection points are also processed to reduce stress.

In case of significant damage, it is necessary to neutralize the main concavities. If there is an opportunity to get close to damage from the inside, then the treatment is carried out by hand. Otherwise hooks will be used. If this option is not possible, then adhesive technologies are used. Fungi or suckers are used first.

Eliminating the main dent, local areas are processed by the core. After, it is necessary to use small fungi. The process is quite simple. Having stuck the fungus to the place of damage, letting the glue harden, it is necessary to tear it. This is repeated more than once.

To complete the work requires the use of hooks. If access to the inside is not possible, the hooks will not work. These deformations are rather hard to remove. To reduce their size is possible only with the help of core and glue method.

This method of repairing damage is quite complicated, requires a lot of experience. Theoretical knowledge alone is indispensable. If there is a desire to learn, then you can train long and hard on a regular metal sheet, having bent it in advance.

Despite the fact that the defect can be quite simple, in the service station you still have to spend a certain amount, which, depending on the class of the car, can be rather big. However, if a motorist owns a theoretical base and knows how to use some types of tools, repairing a car wing with his own hands is within his power.

Devices, tools and materials necessary for the repair to be of high quality

  1. Hydraulic jack with extensions from scraps of pipe. Although suitable, in extreme cases, and rack - such a jack is included in the repair kit of many Russian-made cars. The pipe for the extension to this jack must be square in section so that it can be put on the rack rail.
  2. Straightening hammer or rubber mallet.
  3. Leveling paw, spring, wooden bar.
  4. Several types of sandpaper, ranging from number 80 to number 600.

Wing pre-trimming

Before work it is necessary to remove the wheel from the side of the damaged wing. Place a wooden batten under the jack extension and start squeezing the wing dent from the inside with it. When the main serious dent decreases, you can try to remove small and smooth hands. Remnants of dents and creases are eliminated with a hammer. If necessary, bend the edge of the arch with pliers. Serious creases are straightened with a metal hammer, which must be tapped directly around the hall.

Do-it-yourself car wing repair: final straightening

Work should be carried out carefully, with the application of minimal effort to the surface of the wing. Try not to overdo it, otherwise the metal will stretch, up to the formation of a through hole, after which you will have to apply electric welding. Measure the efforts and, most importantly, learn to "feel" the metal. The technology of the final stage of straightening is the methodical elimination of large defects, gradually reducing them all to smaller, minimal ones.

At the end of the straightening the entire surface, subjected to leveling, should be treated with emery paper. First you need to use the number 80, it is desirable to clean the surface of the wing to the metal.

Surface puttying

After sandpaper processing, it becomes visible in what places to put putty and in what quantity. After the first layer has dried, it is necessary to treat it with emery paper mark №120, and for grinding the next layer apply №220. The final elimination of defects spend paper №360, and leveling minor scratches - emery paper №600.

Priming and painting the repaired part

A primer is applied to the sanded putty, in two layers if possible. To dry the surface, the surface is last polished with emery paper No. 600, dedusted and painted with well-chosen, high-quality auto enamel.

Minor accidents happen to cars quite often. One of the most vulnerable parts of the vehicle is the wing. As a rule, a small dent on it does not threaten automotive systems, but it is noticeable and significantly spoils its appearance. Every motorist who is faced with this kind of problem faces a choice: to hand over his vehicle to a specialized workshop or to try to straighten a dent with his own hands.

As a rule, straightening at home is made much faster and costs much less, but you should take into account the fact that in order to level the wing, you will need a special tool, skills to work with it, as well as a suitable room for work.

  Damage to the car wing

On the question of how to straighten the dent on the wing, you can give a lot of different answers.  However, the most common methods of repairing this damage without painting include:

  • leveling with a jack;
  • straightening hammer back;
  • using vacuum suction cups;
  • straightening industrial hair dryer.

Most car owners are interested in the elimination of dents passed so that the car is not required after that. This is not surprising, because the painting will require additional costs for primer, varnish and the paint itself, as well as a large amount of time.

However, there are situations when the subsequent painting of a car or an individual part is simply inevitable. For example, in the event that the dent has chipped or cracked, or on the bottom of it can be found crumbled damaged paintwork.


  Damage to the paintwork on the wing of the car

Repair of a wing of a car by means of a jack

As a rule, jacks are used for straightening cars without painting in cases where the dent is large and complex. However, in this case it is very important to choose the right size jack and consumables for work. Do-it-yourself dent removal is done as follows:

  1. First you need to secure the necessary access to the inside of the damaged wing. If necessary, you can dismantle all excess equipment and fittings.
  2. The jack itself should be clearly fixed opposite the dents on the wing.
  3. In order for the device to have the right effect on the defect, you will need two strong wooden bars with perfectly flat surfaces. One must be placed directly under the damaged wing, and the second - under the base of the jack.
  4. Gradually working with the jack to draw out a dent without painting.

  Body Straightening Kit

It should be noted that the wing can be successfully otvettovat using a jack only in cases where the damaged surface was originally flat. Otherwise, a straight wooden block may incorrectly bend the wing, and then it will have to be straightened again, but in the opposite direction. Of course, you can pick up a bar that will ideally repeat the curved shape of the wing, but the probability of this is extremely small.

Removing dents with a reverse hammer

As a rule, a tool such as a reverse hammer is used to level the surfaces of those auto parts (without painting) that cannot be dismantled, or have no access to them.

It allows you to straighten small defects in the wing of the car without painting their own hands and in a very short time. To straighten the wing using a reverse hammer should be in accordance with the following algorithm:


When working with a reverse hammer, one should take into account the fact that it is only suitable for repairing small and simple damages of a car wing without painting. If the surface defect has a complex shape, it makes sense to weld the hammer in different places and align the dent in several stages.

There are also types of reverse hammers that are supplied with a special hook that can be mounted on its working end. This hook can hook on any technical hole, and thus avoid the need for welding the unit to the body of the car.

Straightening the wing of a car with a vacuum sucker

If we consider the alignment of dents on the wings of the car without the subsequent painting with their own hands, then the use of suction cups would be almost the ideal option.

The suction cup will ensure that the vehicle's paintwork is kept intact and ensures a tight grip on its surface. Pull a dent on the wing of a car with your own hands, you can, acting according to this scheme:


When planning the use of vacuum suction cups, it is necessary to take into account the fact that they can be used only in cases where the surface of the damaged part of the wing is relatively flat, and the size and shape of the defect roughly coincide with the corresponding dimensions of the suction cup itself.

Therefore, some of their types are implemented with a set of several nozzles. It is also possible to use several suckers at the same time (in cases when it is necessary to level the damage of a complex shape without painting it yourself).

Thermal way of straightening the wing of a car

Such a car with his own hands is one of the most popular because of its simplicity and affordability. All you need for such work is a powerful hairdryer and a can of compressed air.

They can be bought at any hardware store. The volume of the can can be anything (just enough air). However, when choosing a suitable hair dryer, you need to pay attention to the power - it should be enough to warm the metal to the required temperature (it depends on how well the trimming quality is). That is why the preference should be given to industrial thermoguns. They are characterized by high power, low energy costs and price. When you are ready, you can start work. It is performed as follows: