Today's fashionable toy-twist is in adolescents, children and older people - especially the ever-tired and tense “office plankton.” Spinner is designed to relieve stress, to take a person for a while, to distract from sad and heavy thoughts, and to train “sleight of hand” in passing. Today - at the peak of popularity - spinner can be bought in almost any store. But you can also make a twister with your own hands from scrap materials and various debris. It does not take much time and effort.

What is a spinner?

To understand what to start, it is necessary to understand that such a spinner and “with what it is eaten”.

Fashionable toy has many names: pinwheel, spinner for hands, fidget spinner, hand spinner. It is a figure with three blades located radially.

In the center is a metal bearing holding them.


The toy is made of such materials as titanium, copper, brass, stainless steel, plastic. Depending on the material and design of the spinner depends on the speed and duration of its rotation, the vibration of the sound that emanates from it.

Spinner was invented in the 90s of the twentieth century, but gained popularity only in 2017. At first, a funny spinner went around all the schools in the world — students at recess performed various tricks with a spinner. They were even banned in American schools on the grounds that playing with a spinner distracts children from classes and makes it difficult to concentrate.


Then the "wonder-twister" crawled into the offices. Some believe that it can help to concentrate or, on the contrary, relax, as, for example, a top or yo-yo helped before. Representatives of "Forbes" called the spinner "mandatory office toy in 2017".

To "be in trend" - you need to have it. Therefore, we proceed to work!


Simple ways to make a spinner from scrap materials

Experienced life hackers have long invented ways to make a spinner from what is on hand. In the course are all the materials, which elementary things, like cardboard, plastic covers (from soda), buttons, coins.

Despite the fact that the price of a toy does not exceed a few dollars (the average cost in Moscow is 250 rubles), craftsmen make no attempt to create something creative “their own”. Again, "to take his hands on the loan."


Plastic lid spinner

It is an easy-to-use piece of artwork, which, however, will require some effort and diligence.

The work will need:

  1. Four caps.
  2. Glue stick and gun.
  3. Plasticine or kinetic sand (if available at home).
  4. Toothpick.
  5. Nail or knitting needle
  6. Lighter
  7. Scissors.

In the three bottle caps alternately sand or clay - up to the top. This is done so that the blades are heavy, so the spinner will spin.

The remaining space should be carefully filled with a glue gun.

A hole is made in the remaining lid (using a heated knitting needle or a nail) - exactly in the center.


Then three petal caps are laid out around the base with a hole. Between them must be the same distance. How to check? Put another similar cover between them.

All three parts are glued with a glue gun.


Two pieces of 1 cm are cut from the glue stick. One is worn on the base of the toothpick; it is passed to the center of the toy. The second end must also be “secured” with a rod.

The pinwheel can be beautifully decorated, for example, painted with acrylic paints, they fit well on plastic. Homemade spinner ready!


   step-by-step instruction

Cardboard spinner without bearing

For the manufacture of this toy, again, you will not need materials that are difficult to use or that cannot be found.

It is necessary:

  • cardboard;
  • spinner pattern;
  • 3 coins;
  • glue;
  • rod from the handle;
  • awl;
  • materials for decoration (paints, rhinestones, etc.)

The hardest thing is to find a ready-made spinner pattern. This can be done on the Internet, and you can draw it yourself using a marker and the same plastic lid (or coins, or buttons) - just spread them out and circle them.

For the work will require two blanks of cardboard.


You will also need 4 smaller circles (for example, circle a coin of lesser value).

Coins are attached to one of the templates with glue - each on its own blade. This weights. They should be slightly smaller than the diameter of each circle.

On top of the coin are coated with glue and glued the second template-blank.


A hole is made in the center of the cardboard spinner. It is necessary to insert the rod from the handle and cut it - 1 cm is enough.

In two circles of smaller diameter is also made along the hole.

The remaining two remain intact.


Before starting the final work the toy must be painted. Ordinary paints - watercolor, gouache - or markers will do.

You can show your imagination and make a bright model out of a pinwheel, for example, suitable in color to your favorite superheroes.

Can be used for decorating rhinestones, velcro and other elements. They are put on the glue, but should not interfere with the game with a turntable.


How is spinner collected? A rod is inserted into one of the small circles. Glue it is necessary to lubricate its base, insert it into the hole in the toy and press it with the second circle from above.

The remaining two circles are attached from the outside, so that the rod is not visible, and the toy lies comfortably in your hand.

Spinner is ready!


   step-by-step instruction

There are many other options to make a spinner at home, but the ones presented here are the simplest. Even a child can cope with this task.

Conclusion:

Spinner is a trendy anti-stress toy today. To be in trend, you can make a turntable with your own hands. You do not need money for this - all the materials will be at home - just a bit of free time.

Children and adults delighted with the popular toy on bearings - spinner. There are many varieties of different materials. Learn how to make a spinner at home.

How to make a spinner from paper and cardboard

To make a spinner with your own hands, you will need certain materials and skills to work with them. The most simple to perform are models made of cardboard and paper. Their only drawback is fragility and fragility.

It will take:

  • cardboard;
  • scissors;
  • awl;
  • marker;
  • silicate glue;
  • coins of the same denomination - 3 pcs .;
  • empty ballpoint pen;
  • gouache paints and glitter.

Step by step instructions on how to make a spinner:

  1. Draw a blank on the cardboard. To do this, circle the PET bottle cap with a marker, forming a triangle with a central (fourth) circle in the middle. Cut two identical blanks.
  2. Stick three coins on the "blade".
  3. From above paste the second cardboard blank.
  4. In the center of the workpiece, make a through hole with an awl.
  5. Cut from an empty (without paste) rod ballpoint pen about a centimeter.
  6. Cut four circles of smaller diameter than the caps. To do this, you can circle small coins. Sew through holes in two circles.
  7. Insert a centimeter rod in one circle and glue. Then pass the free end of the rod through the center hole of the spinner blank, glue. Push the free end of the rod into the second cardboard circle.
  8. Hide the ends of the rod, to do this, glue on them the top two remaining whole cardboard circles.
  9. Paint crafts and decorate with sparkles.

How to make a spinner from plastic caps

Plastic spinners are much stronger than cardboard ones. Children over 8–10 years old can make a spinner with their own hands from caps. Less need parent help.

To do the crafts, you will need:

  • covers from lemonade - 4 pcs .;
  • plasticine or clay;
  • scissors;
  • glue gun and glue stick;
  • nail and lighter;
  • toothpick.

Step by step description:

  1. Fill the hollow space inside the three lids with clay and pour glue from the gun on top.
  2. Make a hole in the center of the fourth lid. To do this, heat the sharp end of the nail with a cigarette lighter.
  3. Three caps filled with clay, glue on the third side of the fourth with a hole, creating a triangle shape.
  4. From a glue stick for a pistol, cut two pieces one centimeter long.
  5. Break the toothpick exactly in the middle.
  6. Secure one end of the toothpick in a cut piece of glue stick.
  7. Thread the loose end of the toothpick through the hole in the center cover. Hide the remaining sharp tip in another piece of glue stick.
  8. If desired, paint over the covers with acrylic paints or paste over with applications.

As you can see, spinners are quite easy to do yourself. This is a good opportunity to captivate a child for some time and enjoy the result with him.

To create a crafts in the form of a fashionable spinner, you will need ordinary scrap materials that will always be at home. Successes and creativity!

Spinners entered mass fashion not so long ago, but in just a few months not only adults but also children won the hearts. Today spinners are spinning everywhere: on the street, at work, on the subway and even in kindergarten! And every child wants his toy something different from those that already have peers. You can buy an original spinner, but such a toy is not cheap, and the search for a unique spinner takes a lot of time. The best solution is to make a spinner yourself.

So, we bring to your attention a few simple ways how to make a spinner with your own hands from the materials that each house has.

1. How to make a spinner from plastic covers?

Materials:  caps from any plastic bottles of the same size (4 pieces), clay, hot melt glue, nail, scissors, lighter and toothpick.

What do we have to do: Put the clay in 3 lids, using the hot melt glue the remaining space of the lids. Take the fourth lid (without clay) and make a hole in it, for example, a heated nail. Glue the lids with sand to the one where you just made the hole. Take the glue stick and cut 2 small pieces (1 cm) from it. Break a toothpick in half and put a piece of glue on one end of it (make sure that the sharp tip of the toothpick does not stick out) and place it in the center of your future spinner. On the back of the tip of the toothpick, put on the remaining piece of glue stick. Your spinner is ready!

For a more interesting look, you can paint the caps in different colors with acrylic paints.

2. How to make a spinner from cardboard?

Materials:  caps from plastic bottles, cardboard, scissors, a marker, an awl or nail scissors, glue, 3 coins and a rod from a pen.

What do we have to do:  Using the caps, draw 4 circles on the cardboard in the shape of your future spinner. After that, cut out 5 such blanks and glue them together, carefully gluing the edges. Next, cut out smaller circles. With the help of awls or thin nail scissors, make a hole in the center of the spinner. On the sides of the blanks, glue 3 coins or any stickers.

Next, take the pending handle stem and carefully cut 1 cm from it. Make small holes in the center on two small circles. Insert the cut piece from the stem of the handle into one of the circles and glue it along the edges of the hole to fix it securely. Push this circle into the center of your spinner and glue the second circle on the reverse side. The two remaining small circles can be glued over the tips of the rod. To make your spinner spin faster, put some kind of gasket between the workpiece of the spinner itself and small circles (in our example, we used metal pendants).

Is done! Let the child decorate his spinner as he wants, you can use glitter, stickers, rhinestones and other decorations.

3. How to make a spinner using bearings?

Materials:  bearings (3 pcs), tie clips, glue gun or superglue (for a more complex spinner).

What do we have to do:  tie with cable ties bearings from all sides. Cut off the extra hose clamps and that's it - the spinner is ready!

To make it more bright and attractive, you can make the design more complex. Take 7 bearings, place 6 of them around the seventh. You will not use all 7 bearings, you only need 3 circular and 1 central. The rest of the bearings you need only for accurate measurement, so we will leave only those that form a triangle. Glue all the necessary parts with a glue gun or superglue. Spinner is ready! Decorate spinner as you like. You can glue fluffy wire, apply glue to the sides of the spinner and cover the edges with sparkles.

Be sure that nobody will have spinners like your child!

Spinner rapidly conquers the world. Millions of people from all over the world twist and throw this toy at work, in traffic jams, at home, on a walk, in line, etc. Spinner is a powerful and at the same time very simple and affordable anti-stress that helps relieve tension and relax without attracting attention. Spinner became so popular that people began to craft various tricks with him. This toy fell in love with everything from young to old: it is played by preschoolers and big bosses in modern offices.

Spinner - available. If at first they could be found only in the network, then today they are sold literally at every corner, and there are very budget options. However, homemade spinners are not inferior in popularity to ready-made options: Network users are actively looking for how to make a spinner with their own hands at home. And it is easy to explain: self-made spinners are unique, made from scrap materials, and their production is also a kind of anti-stress.

We offer you several options for the manufacture of this accessory. The first is the most time consuming, the rest is a little easier. Choose the one that you seem most understandable and enjoy the most.

Option One: not easy, but interesting

We will really use only available tools. We will need:

  • wooden ice cream sticks (20 pieces);
  • bearing of metal or ceramic (if you want the spinner to spin more easily and longer, make a choice in favor of the latter) of size 8 * 22 * ​​7;
  • 50-kopek coins (in its center, make a hole with an awl) (12 pieces);
  • nuts and bolts, small in size and diameter (4 pieces each);
  • buttons from jeans or dzhinsovok (or the simplest office pins) (2 pieces);
  • glue;
  • sandpaper;
  • paint (it is more convenient to take an aerosol).

How to make a spinner?

Step 1: Procurement

We take two wooden sticks and cut each into two equal parts (lengthwise). That is, at the exit of two sticks, we already have four.

Now we take five whole sticks, tightly pressed to each other and put a layer of glue on top. Put the second stratum from the top of the sticks: in the center we place four whole, and on the edges we put the previously cut sticks. Cover with a layer of glue and them. The third layer will consist of five whole sticks (like the first one). The fourth and last layer is a repetition of the second.

At the exit, we have a base consisting of four sticks of sticks glued together.

Step 2: Main Work

Size spinner choose for themselves. We will tell you on the example of a square 9 * 9, but the proportions can be freely changed.

Make a mark on the workpiece and cut a square (say, 9-centimeter).

Now inside the square draw an equilateral triangle. To do this, divide one of the sides of our square in half and draw two segments of 9 cm each from this point, and then connect the ends.

Then divide each side of the triangle exactly in half and make serifs. Connect each notch with the opposite vertex. The point of intersection of these segments (they are called medians) is the center of the spinner at which we place the bearing. Circle his outline with a pencil.

On the same segments make serifs at a distance of 2.5 cm from each vertex. In the center of each of them, place a coin (a hole is needed to align the hole with a serif and not get lost) and circle it with a pencil.

Using an awl or a sharp knife, dig holes inside the outlined contours. And then loosen them to cut even holes. You can press the bearing and the coin into the workpiece (but carefully, so that the glued layers do not diverge).

Cut a triangle from the workpiece. Now we make two centimeters serifs in the center of each side. Like this:

The height of the notch on the median is 7 mm. Cut out these side triangles.

Step 3: Direct the gloss

We take a sandpaper and sand the surface of the future spinner. We pass along the edges. Paint the blank on both sides and leave to dry.

Step 4: Loads

Glue four coins together. We will have 3 piles, which we insert into our holes in the spinner. In the center we place the bearing.

To turn it easier, in the center of the bearing we place the previously prepared buttons or buttons and glue them. The finished product can be varnished.

Tip: if you own a jigsaw and a drill, take note of the scheme from our instructions and make the body of the spinner not from ice cream sticks, but from an ordinary wooden panel. Then just sand your sandpaper, paint and varnish.

Done!

Option two: the easiest

Using superglue, glue gun or cold welding we connect three or more bearings to each other. Video master class on making spinner at home below.

Option Three: energy consuming

The most reliable way to connect the bearings is not just glue, but also the body. To do this, fit the usual ties, as well as wooden (as in the first method), plastic and metal shells. How to make them, see the next master class.

Option Four: for cyclists

If you have an old bicycle chain, this way to make spinner do it yourself for you. True, you have to work hard to make this popular toy. The chain is laid in a special way, we fasten it with a tie, fix it, put the bearing in the center. Watch the video, which provides detailed step by step instructions.

Option five: if you do not have tools for cutting, but you still want to make a spinner

A paper or cardboard spinner is also a great option for this toy. It will spin no worse! We take cardboard and compasses, cut out 4 circles of equal diameter from it (determine the size of the spinner for yourself, it doesn’t matter), we glue them together. Take a bright cardboard or paper to make the toy more attractive and please you not only with its properties, but also with its appearance.

Bearing holes make slightly smaller than the diameter of the bearings themselves. This is necessary so that they sit tight and do not slip when you twist your toy. Read more about making such a spinner in this video.

Option six: if there are no bearings, but the spinner is still very necessary

If you do not have bearings, the spinner can be made from the simplest material that is easier to get, from plastic caps. We will need six pieces (take the colored ones so that the toy looks more beautiful and interesting) and a toothpick or a stick core.

We look, how to make a bearing from plastic caps.

Bonus

The video instruction below shows the three simplest ways to make a spinner at home. All of them in one way or another repeat the last three instructions (No. 4, 5 and 6), but in this video you will also find some important tips for making a popular anti-stress toy.

Choose the way that you think is the most interesting and understandable. It’s quite possible to make a spinner with your own hands in 2-3 minutes, but you can get stuck and make a toy in a more labor-intensive way. The result will directly depend on your efforts. However, no matter what method you choose, you will definitely get a cool anti-stress toy, which is so popular today.

Views: 5 504

Spinner is a fashionable toy invented in the USA. In Russia, it appeared in 2016 and has already gained extraordinary popularity. What is it? It is called a turntable, spinner, restless.

It develops fine motor skills of the fingers, relieves excitement and has anti-stress effect. Fidget spinner is not only a toy designed to entertain children and adults. This is a wonderful pastime in waiting, trips in transport, queues. Also, this pinwheel allows you to get rid of bad habits, such as: tapping your fingers on the surface of the table, repetitive movements of the hands and even from the habit of smoking. It will allow you to get rid of the habit of twisting something in your hands. In principle, the fidget spinner works using the bearing in the middle of the product with petals.

Fitzhet has two, three, four, five, and some models - even six petals. The most common are toys.
Spinner is made of wood, brass, bronze, plastic, can be combined.

Bearings of two types are applied: metal, as, or with ceramic balls. Characterized by rotation time. The spinner rotates from one minute to several tens of minutes. The longer the rotation takes place, the better the toy.
   The cost of the product affects the use of quality materials in the manufacture of body with petals. The easiest way to buy a spinner.

Making of wood in the home workshop

   However, a person familiar with the tools will independently make such a toy for himself. For this you will need:
  1. A small piece of wood, preferably hard wood;
  2. Bearing (suitable from a broken skateboard);
  3. Sleeves or suitable pieces of round metal;
  4. Epoxy adhesive.

Video with instructions for making wood spinner


First of all, we mark up a piece of wood. A square piece is required.
   We drill a hole in the center and expand it to the outer dimensions of the bearing. The thickness of the workpiece must be equal to the thickness of the bearing. The next step is to insert the bearing and glue it with glue.
   From two opposite sides we drill in two holes equal to the smaller diameter of the sleeves. Then we take the polished sleeves, glue them in pairs and assemble them onto the prepared holes of the plank. Give dry glue.
   We clean, grind and paint in the color you like. A simple spinner with two petals is made at home. In the same way you can make a homemade gadget of plexiglass or PCB.
Harder to make a product with three petals. This will require a drawing, jigsaw and protractor. The above diagram clearly illustrates how to make such a toy.

Paper spinner

  • It is much easier to make a manual spinner from paper.
  • We print the drawing on an ordinary printer.
  • We transfer drawing on thick paper or cardboard.
  • Cut out a pattern of 15-20 samples. Scissors make a hole under the bearing, slightly smaller than the outer diameter.
  • Glue the cut samples with white glue.
  • We place under the press.
  • After the glue is dry, insert the bearing.
  • We clean with scissors and, if necessary, with sandpaper.
  • Color in the desired color. The toy is ready.

Video with instructions for the manufacture of spinner paper without a bearing at home

   As you can see, the cost of the product consists mainly of their own work, because For the manufacture of used parts from out of circulation mechanisms.
   Before assembling the gadget, audit the bearing. To do this, remove the anthers and washed. In this work on making turntables over.

Luminous

  1. The most interesting toys are obtained if you make them yourself from absolutely incredible materials. Make a glowing fitget - all you need is to buy a phosphor online in China.
  2. Dilute 3 g of powder in 7 ml of glycerin, we get a glowing liquid.
  3. Then you can use the described method of manufacturing the central part of the tree. Only instead of the sleeves to use glass flasks from the starter fluorescent lamps.
  4. In a flask with a syringe, pump the liquid and glue them into the prepared holes.
It turns out a beautiful toy that you can play and amaze friends in the dark.

From chocolate

For the manufacture of spinner suitable any material that you can imagine. It can be made from wax, paraffin candles, ice, and even made edible.
   Very original gadget is made from chocolate.

Played - tired and ate.

For the manufacture of such toys will require:

  • Make a form for casting;
  • Bearing;
  • Candy type confetti or dragee;
  • Cardboard, for mold and glue;
  • Wax paper;
  • Pencil scissors;
  • A piece of chocolate foil and the chocolate itself;
  • Glue.

Edible chocolate spinner making video

  1. The drawing on which the template of a twister is cut is taken. A strip of paper is cut out slightly larger than the thickness of the bearing; we glue it around the perimeter of the template.
  2. Then we completely wrap the prepared bearing in foil and place it in the center of our mold, after having put wax paper on the bottom of the mold. At the edges of the petals are laid candy (you can do without candy, this is for beauty). It remains to dissolve the chocolate in a water bath.
  3. As soon as the chocolate becomes liquid, it is poured into a mold using a pastry syringe. It is necessary to fill very carefully, so as not to move the installed parts.
  4. Once filled with all the chocolate, put the toy in the fridge. After a while, the chocolate will harden and you can get it out of the fridge.
  5. It remains to pull the product out of shape, release the bearing from the foil, clean the edges - and you can use it. When tired, just have to eat it.
  6. The entire manufacturing process can be videotaped and shown to friends or posted online on your page.
  7. In a similar way, a homemade fitzhet is made of any solidifying material: stearin, wax, gelatin, and colored wax candles will turn out a multicolored spinner case.
They differ in the number and shape of the petals. The form is completely different: from geometric shapes to exotic and futuristic forms. Differ in the use of bearings: one, three, four or no bearing at all.    When choosing a spinner, follow these rules:
  • The gadget should rotate smoothly and without noticeable beats.
  • Workmanship should not cause complaints.
  • The material from which the toy is made must be of high quality.
  • The rotation is quite long: the longer, the better.
  Some users are advised to choose products from their preferences. If you liked the thing by design, color, manufacturing, buy, and the rotation time is secondary.
So we see, no one can give a definite recommendation. Focus on your own feelings. In order to serve as a turntable for a long time and was always attractive, follow the recommendations:
   Keep the toy from mechanical damage, falling from a height onto a hard surface;
   If the product is made of plastic, it is not recommended to disassemble it, especially the button - plastic parts can be damaged, they are glued or pressed very tightly;
  Periodically wash and lubricate the middle bearing, for which use a syringe with a needle. Washed with gasoline, preferably for lighters, it has almost no odor. It is recommended to lubricate with watch oil in a small amount. It is impossible to use mineral oils for lubrication.