Receiving live and dead water. How to make live and dead water at home? Use of living water

The electroactivator of water changes its structure at the molecular level and saturates monomolecules by simple electrolysis. As a result, the user receives "live" and "dead" water, which is increasingly used for medicinal purposes. According to biophysical and biological indicators, such water is considered more active, its natural properties are enhanced. Let us consider in more detail the work of such an activator and the benefits of the water obtained.

The electric activator is a simple electrical device for restructuring or activating ordinary water. In one cycle, the device simultaneously activates water or an aqueous solution of two types: catholyte (live, alkaline) and anolyte (acid, dead). Each device consists of several elements:

basic bowl for alkaline water conversion;
removable container or glass made of cloth, ceramics;
power supply from the network;
top cover of the device.

A large bowl of an electric activator is made from safe food plastic, it is in it that, by electrolysis, ordinary water is structured into “living”. The removable container made of ceramic or fabric serves as a diaphragm (partition) between the catholyte and the anolyte, while the acidic “dead” water is structured in it.

The bottom of the cover of the activator is placed four electrodes: a pair of anodes, with a sheath with a chemically resistant coating and a pair of cathodes made from food or stainless steel.

The electrodes of the activator, designed and manufactured in an industrial environment, are not destroyed by the action of electrochemical processes, which differ from home-made devices.

During each conversion cycle, the electric current enters the water through the electrodes, changes its catalytic and reactive activity. Electrolysis also changes the entire chain of intermolecular interactions, and, as a result, affects the structure of water or an aqueous solution at the physical level. In other words, under the action of electric current in tap, distilled or filtered water molecular structure changes.

The cathodic electrochemical effect on the liquid turns part of the salts into hydroxides, giving the water alkaline properties. The concentration of hydrogen increases, while nitrogen and oxygen, on the contrary, decreases. Due to the manifestation of stable and unstable acids (sulfuric, persulfur, hydrochloric), anodic treatment intensively increases the acidity in aqueous solution, significantly increasing the redox potential ,.

Use of the device

The use of household electroactivator for tap or distilled water does not cause any difficulties. The action algorithm is simple:

in a flask of ceramic (or tarpaulin) pour water to the top level;
water is poured into a plastic bowl 1.5 cm below the edge of the ceramic diaphragm;
connect the activator to the mains.

The process of structuring lasts from 10 to 40 minutes: the longer the device operates, the higher the concentration of trace elements. After 40 minutes the electrolysis stops and the device should be turned off. Between cycles it is recommended to make small pauses from 5 to 20 minutes.

To avoid overheating during activation, it is important to control the temperature of the plastic bowl and power supply. The current supply increases when the mineralization of the water is too high. For the same reason, it is impossible to pour saline solution for the formation of catholyte and anolyte in one cycle.

After the activation is completed, the water is settled for about an hour; white scurf or sediment throughout the inner area. Its use is prohibited, later the sediment must be drained into the sewer. A white bloom collects on the walls of the ceramic cup; the user manual indicates the frequency of cleaning the anolyte container. Usually, before every tenth cycle the glass is placed in vinegar. Stainless steel or food steel electrodes are wiped with any household rag, while black ones clean themselves, it’s unacceptable to clean them mechanically or with special means.

Catholyte and anolyte, belonging to the class of metastable elements, over time, they lose their unique properties. The effect of activated water lasts for 7 hours after treatment. Storage of water or saline in the refrigerator does not make sense, the liquid should be consumed immediately.

"Living" and "dead" water

The purpose of the operation of each activator is the restructuring of water, and any electrical device contains two containers; in one process, the apparatus makes both “dead” and “living” water. For example, the gaining popularity of the AP-1 looks like a regular filter jug, inside which there is a small additional capacity.

The definitions of "living" and "dead" water are conditional, in both cases it is ordinary water with a modified molecular structure. The term “living water” means catholyte, which stimulates all biological processes, and “dead” - anolyte, means deceleration.

There are many different opinions about the miraculous properties of healing water. One can argue for a long time whether it is a myth or a reality, but one cannot deny the physical processes that occur at the molecular level.

The benefits of "living" water

Living water or catholyte possesses alkaline properties, has a high ph value - about 10 units. Under the influence of electric current, a part of the molecules decomposes into hydrogen ions. Alkaline water promotes life and has a strong bio-stimulating effect. Therefore, it is used to cleanse the body, heal wounds, and seeds treated with "living" water, bloom faster and germinate.

Naturally, such water cannot be called a panacea for all diseases and is hardly allowed to be taken as an independent medicine. At the same time, its benefits to the body are difficult to diminish:

water enriched with alkali promotes the healing of all wounds, burns;
helps to cure ulcers;
cleans the body, quickly removes toxins, toxins;
increases blood pressure and strengthens the immune system;
has a beneficial, healing effect on the kidneys, liver, and the entire digestive system;
enhances the impact of the medication.

Dead water features

Dead water or anolyte is endowed with retarding properties and suspends any biological processes. It is used for disinfection:

cleansing vegetables or fruits, which increases their shelf life;
disinfection of any items;
in alternative medicine for the destruction of allergens, fungi and other bacteria.

Anolyte is an acidic water with a low level of ph (3-4 units), when interacting with bacteria, it destroys cell walls, blocks protein synthesis. In simple terms - “dead” water freezes the vital activity of microorganisms, which is useful for a person in combating various diseases.

Overview of modern water electroactivators

Below we give the most popular examples of industrial activators. Despite the widespread prevalence, not all of the models presented do a good job.

AP-1 device

The electric activator for AP-1 water - one of the most popular . The device is different good quality production:

the main container is made of high-grade plastic;
heavy-duty electrodes made of titanium, platinum and stainless steel;
the ceramic diaphragm is made from a special grade of clay.

An activator with a power of 70 W consumes no more than 40 W during operation, which makes it rather economical. In one cycle of 20–30 minutes, AP-1 is able to activate almost one and a half liters of structured water. AP-1 does not have a stylish and modern design, but easily and seamlessly fit into any kitchen.

The cost of the AP-1 is slightly higher than similar devices, thanks to the built-in indicator of water quality.

"Zdravnik"

A simple machine is available in two versions: with a ceramic or canvas glass. The second one is a bit cheaper. "Zdravnik", manned ceramic cup, at a price approaching the AP-1, but significantly inferior to him in quality and functionality.

The design is very similar to AP-1:

plastic container;
a glass of ceramic or tarpaulin;
stainless steel electrodes.

Its advantage is the price, otherwise the device attracts little attention. Naturally, Melesta will cope with its main task, but it has some drawbacks. For example, the design implies only fabric glasswhich is inferior to ceramics. Instead of four electrodes, there are only two made from food steel. External data of the device will not earn more than three points: rough performance and mediocre design.

Naturally, deficiencies do not affect the quality of the water, the result of activation will be similar to AP-1 or professional PTV. But the term of work, ergonomics and aesthetics are still flawed.

PTV

PTV is designed to professional use in sanatoriums or dispensaries, but it is often purchased for the home. The advantage of the activator for water in its resource, here the manufacturer has installed thick electrodes, which significantly increases its service life. The power of the device is only 75 watts.

PTV also differs in its design: instead of a ceramic glass for anolyte in the device, there is one container divided by a wood membrane. The only disadvantage of the activator in its cost, but the best quality requires.

“Live” and “Dead” water.

Activated water can be obtained by electrolysis of ordinary water (tap water). According to its chemical properties, “living” water has an alkaline environment, therefore, it has a healing effect, and “dead” - an acidic environment with disinfectant properties. The electric current passing through ordinary water changes its internal structure and contributes to the erasure of harmful environmental information.

After electrolysis, the water is divided into two fractions, which have healing properties. In the treatment of diseases, living and dead water are taken in various combinations depending on the type of disease.

Specifications:

Dead water (acid) - pH - 2.5-5.5 units. Excellent bactericide, disinfector.
It is used in the prevention and treatment of colds, flu, tonsillitis.
Reduces blood pressure, soothes the nervous system, improves sleep.
It helps in the treatment of paradanthosis, stops gingival bleeding, dissolves stones on the teeth.
Reduces joint pain. Quickly helps with intestinal disorders.
Dermatomycosis (fungal infections of the skin) disappear in a few days.
The disinfection properties of dead water are enhanced by dissolving 5 g of salt in it before turning on the electrolyzer.
Household use: Disinfection of residential and non-residential premises, drinking water, soil, containers, clothes, shoes, descaling the walls of dishes, increasing the shelf life of vegetables and fruits, and much more.
Normalizes the digestive tract in domestic animals and poultry.

Living water (alkaline) - pH - 8.0-11 units. Excellent stimulator, toner, energy source.
It sets the whole body in motion, gives energy, vigor, stimulates cell regeneration, gently increases blood pressure, improves metabolism.
Heals wounds, ulcers, incl. stomach and duodenum, pressure ulcers, burns.
It helps in the treatment of prostate adenoma, in the treatment and prevention of atherosclerosis, polyarthritis, osteochondrosis.
Household use: Accelerates the germination of grain and seeds for planting, stimulates the blooming of house flowers, revives green vegetables and wilted flowers, improves the taste of baked goods (when kneading dough on living water), the quality of bee feeding syrup (bees become more energetic), stimulates growth and resistance to diseases of poultry and livestock (decrease in the mortality of young), watering the beds with living water stimulates the maturation of the crop.
The combined use of living and dead water helps to fight diseases such as allergies, hepatitis, psoriasis, and female diseases (colpitis, cervical erosion, etc.).

Where to get the device?

And where to buy such a device, you ask? Yes, not a problem. It is necessary to type in the search bar “Buy water activator”, and you will have a whole list of sites selling such equipment. You will be offered such models as AP-1 of three types of versions, MELESTA, IVA-1, PTV-A and other models. That's just the cost they have, in my opinion, quite “biting”. If the purchased device is disassembled and looked at its insides, you will immediately understand that the price given for this simplicity is rather large, and also pay the cost of delivery to your region.

The conclusion suggests itself - to make the device yourself, because it is not something super-smart. It can be made by any person, a little-small person who understands electricity. And to graduate from higher educational institutions for this is not necessary.

Let's look at several options for devices for the preparation of "living" and "dead" water. They differ slightly from each other constructively, but the essence of the preparation for all of them is the same.

Apparatus for making live and dead water with your own hands.

The scheme of the device for obtaining activated water is shown in Figure 1.

Figure 1. The scheme of the device for receiving live and dead water.

As we see in the diagram, two electrodes are placed in a jar, which are fixed to the lid with screws. The power cord is connected directly to the left electrode, and to the right electrode through a diode. According to the polarity shown in the diagram, the left electrode will be the cathode, and the right anode.

Dead water — anolyte — will be released at the positive electrode, so a bag of dense tissue is fixed at the anode to collect it. The fabric should be rather dense, but thin; the tarpaulin from gas masks or thick coarse calico is very suitable for this purpose. The criterion for choosing a fabric can be considered the passage of air through it. For this purpose, it is enough to attach a cloth to your mouth and try to blow air through it: the resistance of the cloth should be quite noticeable.

Electrodes are the main component of the device, it is advisable to make them from food stainless steel with a thickness of 0.8 - 1.0 mm (can be replaced with a regular stainless steel sheet). Figure 2 shows the dimensions (100 mm) of electrodes applicable for a half-liter jar. If you make them for larger cans, for example, 3-liter ones, you need to take into account that the electrode should not reach the bottom of the can by 10 -15 mm.

Pay attention, on the positive electrode in the upper part a U-shaped propyl is made, and the tail is slightly bent to the side, this kind of hook is necessary so that it can be attached to a bag in which “dead” water will collect. On a negative electrode propyl do not need to do.

As a cover, conventional kapron will fit; electrodes should be strengthened on it, but nylon does not have mechanical strength, and therefore, so that the electrodes do not swing, they should be fixed through sealing insulating gaskets that can be made of PCB (not foil). The design of such a gasket, see figure 3.

Figure 3. Insulating gasket.

How the gasket is installed on the nylon cover, see figure 4. Here you see two holes for mounting the electrodes, and one hole for the removal of gases in the process of electrolysis. View from above.

Figure 5. So the electrodes are attached to the cover through a sealing insulating gasket. Side view.

Figure 5. Fastening electrodes.

It is most convenient for the device to use a diode, for example D231, with a threaded cathode. In this case, the diode and nut threads will serve as the mounting of the positive electrode to the cover, i.e. instead of the usual bolt. And if instead of a diode we use a rectifier bridge (designed for a reverse voltage of 500-600 volts), then keep in mind that the capacity of our water activator will increase 4 times, while the cooking time will be much less.

Preparation of activated water.

The preparation of living water is quite simple. You just need to pour water into the fabric bag, fix it on the positive electrode, and then insert it into the jar filled with water. The water in the bank should not reach the edges and be just below the top edge of the cloth bag. More precisely, the level of pouring water into the bank is established empirically.

Preparation of living water takes no more than 5 - 10 minutes. After that, it is necessary to remove the electrodes from the jar and very carefully, so as not to mix the obtained fractions, pour the dead water out of the cloth bag into separate dishes.
This is “neat” - and this is the main disadvantage of this design, of course, if you do not think about the possibility of electric shock. Therefore, all manipulations, ranging from pouring fresh water and ending with getting alive and dead, are best done by turning off the device from the power outlet.

In addition to the design already described, it is possible to recommend for manufacturing the construction of the device without a fabric bag. In this case, you will need two separate containers, but without a neck, like cans, and with straight sheer edges. The design of the electrodes remains unchanged, only they will have to be installed separately on each tank.

In order to ensure electrical contact between these banks, they should be connected with a cotton bundle, wrapped in gauze (you can also wrap a string). In this case, the harness should be moistened with water. This harness connects the banks electrically and provides a path for the passage of ions between the banks during operation. Thus, in one jar living water will accumulate, and in the other dead water (of a yellowish tint). Therefore, after the end of the process, it is sufficient to simply turn off the installation from the network and obtain catholyte and anolyte, simply from different cans, with the same capacity. Cooking time takes about half an hour.

Attention! All manipulations with water do when disconnected from the network device!

Attention! Do not touch the harness while the appliance is in operation, while the harness is energized during operation!

According to reviews of those who have already implemented the second design, it is the most successful than the first. The advantages of this design are that you do not need to look for a fire hose or a tarpaulin in order to sew a bag for dead water, and you don’t need to worry when removing this bag with water so that you do not accidentally mix live and dead water.

The original solution of folk craftsmen is that in the second design, instead of electrodes, you can use a couple of tablespoons of stainless steel.

Both the first and second designs can be plugged into the network not directly, but through a light bulb of about 15 watts. These bulbs are used to illuminate the chambers of refrigerators, lights, sewing machines and microwave ovens. In case of short circuit of the activator electrodes, the lamp will act as a fuse, and in the case of normal operation - the role of an indicator: at the beginning of the process the lamp will shine brightly, closer to the end the brightness will drop significantly, after which the lamp will turn off completely. This is a signal of the availability of activated water.

In the process of preparing water, scum will form on the electrodes and on the jar itself, which can be removed with a solution of citric or hydrochloric acid. After that, the jar should be thoroughly rinsed.
If chlorinated water enters your water supply system, do not pour water from the tap directly into the appliance. It is better to let the water stand for 5-6 hours to get chlorine out of it, otherwise hydrochloric acid may occur. Well, it will not be superfluous to filter water through any household filter and boil it.

Another version of the device.

Here, two stainless steel circles act as electrodes, and a diode with a threaded cathode is mounted on the handle of one of them. A split syringe serves as a cotton tow.

Attention!!! Mugs should not be connected to each other.

Well, another scan page from the magazine: to enlarge the image, click on the image.

The use of "living" and "dead" water for the treatment of diseases.

1. Prostate adenoma.

Within 5-10 days, 4 times a day, 30 minutes before a meal, take 1/2 cup of "living" water.
After 3-4 days, mucus is secreted, there is no desire to urinate often, on the 8th day the tumor passes.

2. Sore throat.

For 3-5 days, 5 times a day after eating, gargle the "dead" water and, after each rinse, drink 1/4 cup of "living" water.
The temperature decreases on the 1st day, usually on the 3rd - the disease passes.

3. Allergy.

Three days in a row, after eating, rinse your mouth, throat and nose with “dead” water. After each rinse, after 10 minutes, drink 1/2 cup of "live" water. Moisten the skin rash (if any) with dead water. The disease usually goes away after 2-3 days. The procedure is recommended to be repeated for prophylaxis.

4. Pain in the joints of the arms and legs.

3 times a day before meals take 1/2 cup of "dead" water for 2-5 days
The pain stops on the 1st day.

5. Bronchial asthma; bronchitis.

For three days, 4-5 times a day, after eating, rinse your mouth, throat and nose with heated “dead” water. In 10 minutes. after each rinse drink 1/2 cup of "live" water. If there is no noticeable improvement, make inhalation with dead water: heat 1 l of water to 70-80 ° C and breathe its steam for 10 minutes. Repeat 3-4 times a day. The last inhalation can be made "live" water with soda. Desires to cough are reduced, the general state of health improves. If necessary, repeat the treatment.

6. Inflammation of the liver.

Daily for 4-7 days, take 4 times 1/2 cup: on the 1st day only “dead” water, in the following days - only “live” water.

7. Inflammation of the colon (colitis).

The first day is better to eat nothing. During the day, 3-4 times drink 1/2 cup of “dead” water with a “fortress” of 2.0 pH. The illness passes within 2 days.

8. Gastritis.

For three days, 3 times a day, 1/2 hour before meals, drink "live" water. On the first day of 1/4 cup, the rest of 1/2 cup. If necessary, you can drink another 3-4 days. Stomach pains pass, acidity decreases, appetite and general well-being improves.

9. Herpes (Cold).

Before treatment, thoroughly rinse the mouth and nose with “dead” water and drink 1/2 cup of “dead” water. Bubble with the contents of herpes, rip cotton swab moistened with heated "dead" water. Next, during the day, 7-8 times for 3-4 minutes, apply a tampon moistened with “dead” water to the affected area. On the second day, drink 1/2 cup of “dead” water, repeat the rinse. Swab moistened in the "dead" water to the crust to apply 3-4 times a day. Need a little patience when you tear the bubble. Burning and itching cease within 2-3 hours. Herpes passes within 2-3 days

10. Hemorrhoids.

For 2-7 days in the morning, rinse the cracks with “dead” water, and then apply tampons with “living” water, changing them as they dry.
Bleeding stops, cracks heal within 2-3 days.

11. Hypertension.

During the day, take 2 times 1/2 cup of "dead" water.
Pressure is normalized.

12. Hypotension.

During the day, 2 times take 1/2 cup of "live" water.
Pressure normalizes

13. Worms (helminthiasis).

Make cleansing enemas, first with “dead” water, and in an hour - with “living” water. During the day, drink every hour two-third glasses of "dead" water. The following day, to restore health, drink 0.5 glass of "living" water half an hour before meals. Feeling may be unimportant. If after 2 days recovery did not come, then repeat the procedure.

14. Purulent wounds.

Wash the wound with “dead” water, and after 3-5 minutes wet it with “living” water, then within 5-6 days, only wet it with “living” water. The wound from the dead water dries out, scabs fall off from the living water (neutralization occurs).
Healing takes place within 5-6 days.

15. Headaches.

Drink 1/2 cup of "dead" water.
The pain passes in 30-50 minutes.

16. Fungus.

First, thoroughly wash the areas affected by fungus with hot water and laundry soap, wipe dry and moisten with “dead” water. During the day, moisten with "dead" water 5-6 times and allow to dry without wiping. Socks and towels to wash and soak in "dead" water. Similarly (you can once) disinfect shoes - pour “dead” water into it and stand for 20 minutes. The fungus disappears within 4-5 days. Sometimes the procedure must be repeated.

17. Influenza.

During the day, 8-12 times rinse the nose and mouth with “dead” water, and at night drink 1/2 cup of “live” water.
During the day the flu disappears.

18. Diathesis.

To moisten all rashes, swellings with "dead" water and to allow to dry. Then make compresses with "live" water for 10-5 minutes. The procedure is repeated 3-4 times a day. The affected areas heal in 2-3 days.

19. Dysentery.

On this day, nothing is better. During the day, 3-4 times drink 1/2 cup of “dead” water with a “fortress” of 2.0 pH. Dysentery passes during the day.

20. Jaundice (Hepatitis).

3-4 days, 4-5 times a day, 1/2 hour before meals, drink 1/2 cup of "live" water. After 5-6 days see a doctor. If necessary, continue treatment. The state of health improves, appetite appears, the natural complexion is restored.

21. The smell of the feet.

Wash your feet with warm water, wipe dry, moisten with “dead” water, and after 10 minutes - “live” water and allow to dry. Shoes wipe inside with dead water and dry, moisten socks with dead water and dry.
The unpleasant smell will disappear.

22. Constipation.

Drink 0.5 cups of "live" water. You can make an enema of warm "living" water.

23. Toothache.

Rinse the mouth with "dead" water for 5-10 minutes. The pain disappears.

24. Heartburn.

Drink 1/2 cup of "live" water.
Heartburn stops, increases the release of gases.

25. Kolpit.

Heat the “dead” water and “live” water to 37–40 ° C and first douche with “dead” water at night, and after 15–20 minutes with “live” water. The procedure is repeated for 2-3 days.
After one procedure, colpit passes.

26. Conjunctivitis, barley.

Rinse the affected areas with warm water, then treat with warmed “dead” water and allow to dry out without wiping. Then, two days 4-5 times a day to do compresses with heated "living" water. At night, drink 1/2 cup of "live" water. The affected areas heal in 2-3 days.

27. Deprive eczema.

For 3-5 days, wet the affected area with “dead” water and let it dry, then wet it with “live” water 5-6 times a day. (In the morning, moisten with "dead" water, after 10-15 minutes with "living" water and another 5-6 times with "living" water during the day.
It is cured in 3-5 days.

28. Washing hair.

Wash your hair with shampoo, wipe, moisten hair with “dead” water, and after 5 minutes “live” water.
Dandruff disappears, hair becomes softer, healthier.

29. Burns.

If there are water bubbles, it is necessary to pierce them, wet the affected area with “dead” water, and after 5 minutes “live”. Then, during the day, 7-8 times moistened with "living" water. Procedures to spend 2-3 days.
Burns heal in 2-3 days.

30. Increased pressure.

In the morning and in the evening, before eating, drink 1/2 cup of “dead” water with “strength” of 3-4 pH. If it did not help, then after 1 hour, drink a whole glass. The pressure is normalized, the nervous system calms down.
31. Low pressure.
In the morning and in the evening, before eating, drink 1/2 cup of “living” water with pH = 9-10. The pressure returns to normal, a surge of strength appears.

32. Diarrhea.

Drink 1/2 cup of "dead" water, if diarrhea does not stop within an hour, repeat the procedure.
Abdominal pain stops after 20-30 minutes.

33. Polyarthritis, arthritis, osteochondrosis.

The full treatment cycle is 9 days. Drink 3 times a day 30-40 minutes before a meal: - in the first three days and 7, 8 9 a day for 1/2 cup of “dead” water; - 4th day - break; - 5th day - 1/2 cup of "living" water; - 6th day - break.
If necessary, after a week this cycle can be repeated. If the disease is started, then it is necessary to apply compresses with warm "dead" water to sore spots. Pains in the joints go away, sleep and well-being are improved.

34. Cuts, shots, breaks.

Wash the wound with dead water and dress it up.
The wound heals within 1-2 days.

35. Cold colds.

Make a compress on the neck, moistened with warm "dead" water, and drink 4 times a day for 1/2 cup of "dead" water before eating.
The illness passes within 1-2 days.

36. Prevention of insomnia, irritability.

At night, drink 1/2 cup of "dead" water. For 2-3 days, 30-40 minutes before a meal, continue to drink “dead” water in the same dosage. Spicy, fatty and meat food during this period should be excluded. The dream improves, irritability decreases.

37. Prevention of acute respiratory infections, colds during epidemics.

Periodically, 3-4 times a week, in the morning and in the evening, rinse the nose, throat and oral cavity with “dead” water. After 20-30 minutes, drink 1/2 cup of "live" water. When contacting an infectious patient, do the above procedure further. It is advisable to wash your hands with "dead" water. Appears cheerfulness, increases efficiency, improves overall health.

38. Psoriasis, scaly zoster.

One cycle of treatment - b days. Before treatment, wash thoroughly with soap, steam the affected places, with the maximum tolerable temperature or make a hot compress. Then, moisten the affected areas with heated "dead" water, and after 8-10 minutes, begin to moisten with "living" water. Further, the entire treatment cycle (i.e., all 6 days) should be 5-8 times a day to soak the affected areas only with “living” water, without prior washing, steaming and treating with “dead” water. In addition, in the first three days of treatment you need to drink before meals for 1/2 cup of "dead" food, and 4, 5 and 6 days - for 1/2 cup of "live".

After the first cycle of treatment, a week-long break is taken, and then, the cycle is repeated several times until recovery. If during the treatment the skin dries out, cracks and hurts, then you can wet it several times with “dead” water.
At 4-5 days of treatment, the affected skin begins to clear, clear pinkish skin appears. Gradually lichen disappears completely. 3-5 cycles of treatment are usually enough. You should avoid smoking, drinking alcohol, spicy and smoked food, try not to be nervous.

39. Radiculitis.

During the day, 3 times before meals drink 3/4 cup of "live" water. The pain passes during the day, sometimes in 20-40 minutes.

40. Expansion of veins, bleeding from torn knots.

Wash the swollen and bleeding areas of the body with “dead” water, then moisten a piece of gauze with “living” water and apply to the swollen areas of the veins.
Inside, take 1/2 cup of “dead” water, and after 2-3 hours, start taking 1/2 cup of “living” water at intervals of 4 hours 4 times a day. The procedure is repeated within 2-3 days.
Lots of swollen veins dissolve, wounds heal.

41. Acne, peeling of the skin, acne on the face.

In the morning and evening, after washing, 2-3 times with a 1-2 minute interval, wash the face and neck with “living” water and let it dry without wiping. For shriveled skin make compresses for 15-20 minutes. In this case, “live” water should be slightly warmed. If the skin is dry, then first it should be washed with dead water. After 8-10 minutes do the above procedures Once a week, wipe your face with this solution: 1/2 cup of "live" water, 1/2 tablespoon of salt, 1/2 teaspoon of soda after 2 minutes, rinse your face with "live" water.
The skin is smoothed, it becomes softer, minor abrasions and cuts are tightened, acne disappears and peeling stops. With prolonged use, wrinkles almost disappear.

42. Removal of dead skin from the feet.

Soak your feet in soapy water, wash them in warm water, and not wiping your feet in warm “dead” water, rubbing areas with outgrowths, remove dead skin, wash your feet in warm water, wipe dry.

43. Improving well-being, normalization of the body.

In the morning and evening after taking it, rinse your mouth with “dead” water and drink 1/2 cup of “living” water with alkalinity of 6-7 units.

44. Cholecystitis (inflammation of the gallbladder).

Within 4 days, 3 times a day, 30-40 minutes before meals, drink 1/2 glass of water: the first time is “dead”, the second and third time is “live”. "Living" water should have a pH of about 11 units. Pain in the heart, abdomen and right shoulder blade disappear, bitterness in the mouth and nausea disappear.

45. Eczema, versicolor.

Before treatment, soak up the affected areas, then moisten with “dead” water and allow to dry. Next, 4-5 times a day, only moisten with "live" water. At night, drink 1/2 cup of "live" water. The course of treatment is a week. The affected sites heal within 4-5 days.

46. Cervical erosion.

Sprinkle overnight heated to 38-40 ° C "dead" water. After 10 minutes, repeat this procedure with "live" water. Next, repeat the washing with “living” water several times a day. Erosion resolves within 2-3 days.

47. Gastric and duodenal ulcer.

Within 4-5 days, 1 hour before meals, drink 1/2 cup of "live" water. After a 7-10 day break, repeat the treatment. Pain and vomiting stop on the second day. Acidity decreases, the ulcer heals.

48. Inflammatory processes, boils, boils.

Within 2 days Apply to the inflamed area a compress soaked in pre-heated living water. Before applying a compress, daily wet the affected area with dead water, let it dry. At night, drink 1/4 tbsp. living water. Result: inflammation disappears within 2 days.

49. Cough.

Within 2 days drink 1/2 tbsp. 4 times a day after meals live water. Result: cough will stop.
Sterilization and disinfection. Any objects moistened with dead water and dried. The body is wiped with a swab moistened with dead water. Result: complete sterilization.

50. Face hygiene.

In the morning and in the evening after washing, wash your face with dead water, and then live. Result: The face becomes white, acne disappears.

Note.

When ingested only with “living” water, thirst arises, it must be quenched with compote or acidified tea. The interval between the methods of "dead" water and "living" should be at least 2 hours.

"Live" and "dead" water is an excellent additional tool to the system of natural healing.
As you can see, the use of Living and Dead Water does not require any skills, knowledge, everything is done very simply and a confident result is achieved in a fairly short period of time, which is a huge plus for this type of treatment.

Pay attention to the widest range of the action of living and dead water, about 50 different diseases can be cured, and how many more home use options. In a word, for almost all occasions, and this is very impressive.

Many have long enjoyed the amazing properties of "living" and "dead" water. The device for receiving "live" and "dead" water is simple. Unfortunately, not everyone knows how to make it yourself, without searching for hoses from fire hoses and other things, although not scarce, but no one knows where they come from.

On the Internet, a description of quite complex and inconvenient to manufacture instruments is walking. A. Aristov from Vitebsk already 20 years ago offered an excellent method of manufacturing the device. Its construction was described on the pages of “Lefty” - supplements to the magazine “Young Technician”. I have not yet met a more successful design.

You do not need to look for a fire hose or a tarpaulin in order to sew a bag for "dead" water. No need to suffer, removing this bag of water, so as not to accidentally mix the "live" and "dead" water.

Device for "live" and "dead" water can be made in one evening. You just need a diode bridge, designed for a reverse voltage of 500-600 volts and a current of 10A, who does not know, can consult with a specialist, or individual diodes in the amount of 4 pieces. This is the most difficult in our device. Although now it is solved instantly on any radio market for 2-10 rubles.

In addition, we will need 2 tablespoons of stainless steel (electrodes), the power cord is about a meter and a half, a light bulb for a refrigerator or microwave with a power of 15 W, and another one and a pair of glasses or glass jars will do. The harness is made of cotton wool, wrapped with gauze and thread.

How to connect everything is clear from the figure. Any electrician will eliminate the difficulties with electrical connections, even a schoolboy who begins to study in a “skillful hands” circle. Pour ordinary water into containers and insert spoons connected to the device. The harness is well soaked with water and immerse one end into one container, the other into the other.

Attention! All this is done when the device is disconnected from the network!

Then connect the device to the network and in no case do not touch the tow, water in containers, spoons and parts of the device itself! All of this is life-threatening stress!

The light bulb starts to glow faintly, and the electrolysis reaction starts in tanks with water. In a container with a spoon connected to the minus, the water becomes “alive”, and in a container with a positive electrode - “dead”.

Leave the device for 30 minutes plugged in and see that the “dead” water has become yellowish. Unplug the appliance, remove spoons and tourniquet from containers. and can enjoy the health.

The article was not intended to describe how to use the resulting water, this information is full on the Internet. We can only say that the “dead” water copes well with the disinfection of various wounds, even those that persist for a long time, and the “live” helps to heal them.

Alternative treatment with live and dead water is becoming increasingly popular. This method seemed to come to us from Russian fairy tales. In fact, a liquid with healing properties is formed as a result of electrolysis. In this article we will look at how the treatment takes place, and also reveal the topic “living water-preparation”.

What does living and dead mean?

Dead water is acidic, its electrical potential is positive. Living water is a negatively charged liquid and has a pH greater than 9, that is, it is alkaline. Both types of water are used in alternative medicine. The treatment is alive and dead water.

Effect on the body

What is the use of living water?

Living water stimulates vital processes in the body:

Rejuvenates the body
Increases immunity
Accelerates metabolic processes
Heals wounds

Dead water properties

The properties of dead water are also very valuable:

Good disinfector
Has a bactericidal effect
Relieves Colds
Eliminates fungus

The treatment of live and dead water has become popular because its scope is quite wide. Next, we consider the question of how living water - the preparation and necessary for this device.

What you need to have?

To prepare the desired water special devices are sold activators. You can make them yourself at home. What is needed for this:

Water. Spring water would be ideal, but not everyone can find it, so ordinary tap water is also quite suitable. It must be defended during the day.
Two glass mugs
Two stainless forks
Bandage and cotton wool
Lamp 20 watts.
Wire with plug

Most homes have these items. If something is missing, you can buy it.

Living and dead water - cooking

To prepare living water, you need to perform quite simple manipulations:

Put the forks into the cups with the teeth up;
Connect a diode to one of the plugs, the end of which is connected to the wire;
You can make the system stronger using electrical tape;
Attach the free end of the wire to 2 plugs.

Is done. Now it remains only to turn on the plug in the outlet. Diode lean against the lamp. If the lamp is lit, then everything is done correctly. Turn off the network. Now prepare the "bridge" for ions - wrap cotton wool with a gauze bandage.

Fill the cups equally with water; place the cotton wool bridge so that it ties both cups together. That's all. Now you can connect the system to the network. After 10 minutes you will have ready-made live water.

Results

After disconnecting the system from the network, remove the bridge. In the cup to which the diode was attached, the water will be dead, because there is a positive charge. In the other, living, negatively charged, water.

We remind you that the plugs are pulled out of the water ONLY after disconnecting the device from the network. Otherwise, you will be shocked.

So it is very simple you can build the system yourself at home and carry out the treatment with living and dead water.

Cooking melt water

By freezing water a very useful liquid is also obtained. It is not living water, as some say. Read more in the article: But it also has a number of useful properties and it is possible to make living and dead water from it.

To prepare the water must be defended during the day, or clean the filter. What's next:

Heat the water without boiling. So you eliminate some harmful compounds.
Cool the liquid at room temperature.
Neutralization of water from deuterium. Throw away the first ice that forms during freezing, it will contain this dangerous isotope, because it freezes at higher temperatures first.
The fluid is again sent to the freezer. It freezes and looks like this: transparent at the edges, white in the center. Wash the white part with boiling water and remove. It will contain harmful substances. Clear ice is melting and you can drink it.
Melting should occur at room temperature. The resulting water can be drunk, and also it can be washed. When boiling such water can lose its healing properties, so you should not do this.

Recipes treatment of live and dead water.

Here are some recipes for how to conduct treatment with living and dead water:

Allergy. Three days rinse with throat after each meal. 10 minutes after rinsing, drink about half a glass of living water.
Constipation. Drink half a glass of living water.
Rash on the skin. About a week, wipe your face with dead water.
Angina. Dead water gargle ten minutes before eating. After drink a quarter glass of living water.
Diarrhea is treated with half a glass of dead water. If it did not help, then you can drink as much again in an hour.
Diseases of the liver and their treatment with live and dead water. The first day, drink dead water in half a glass 4 times. Then the rest of the week for half a glass of living water the same amount of adoption.
Migraine passes after drinking half a glass of dead water.
Gastritis. Half an hour before a meal, drink live water as follows: a quarter cup on the first day, half a cup the next days. The course is 3-7 days.
Pressure. If the pressure is low, then drink half a glass of living water 2 times a day. If the pressure is high, then use dead water. Do not drink more than a week.

Currently, to obtain healing water does not necessarily look for some mountain springs and reservoirs. It can be obtained by electrolysis of ordinary tap water in. From a chemical point of view, living water has alkaline properties and therefore it perfectly heals wounds. And dead water is a unique disinfectant, as it contains acid. When passing through ordinary water, electric current completely changes its structure.

Accordingly, after the current treatment, the water is divided into two fractions. Each has certain healing properties. Usually it is recommended to use live and dead water in combination to achieve maximum results.

Apparatus of living and dead water do it yourself

On sale you can easily find special devices for obtaining activated water. But such a device can be made independently. To do this, take the usual glass jar with a lid and fix the electrodes on it with nuts and screws. One of the electrodes will be the cathode, and the other will be the anode. Dead water will be released at the positive electrode. This means that at the anode you need to fasten a bag of thick fabric. For such purposes is ideal coarse. The main thing is that the air passes through the fabric normally.

This "living water" is not yet ready. Now it needs to be slightly frozen. When on the surface of a small ice, it is necessary to make a hole in it. Through this hole, pour the water into the prepared container. Ice can be thrown away, isotopes are gathered in it.

Now you need to freeze the remaining water. This time it should freeze about 2/3. At this stage of the preparation of "living water" you need to pour out, on the contrary, unfrozen water. From the ice, which as a result remained, and during melting "living water". To drink it is very useful for the body.