Before we advise how to open a beer with a cigarette lighter, let's talk about beer and the types of its packages produced in Russia. Beer is an alcoholic beverage with a low alcohol content. It insists on hops, so it has a specific smell and taste.
1 Beer Features
The drink is made from grain extract and flavored with hops. Due to its carbon dioxide content, it is good to drink to quench your thirst. With reasonable consumption of beer is not harmful to health, on the contrary, thanks to him, he can increase vitality. Most of the drink is water, it accounts for about 90%, the remaining 10% comes from non-fermented nutrient extract. These substances are biologically active. The raw materials for beer are barley malt, yeast, hops and water.
It is important to know!
The easiest way with a 100% guaranteed result to recover from alcoholism without pills, shots and doctors. Find out how our reader, Tatiana, saved her husband from alcoholism, without his knowledge ...
2
Beer produced in three types - dark, light and dim. Dark is made from dark malts. Also, the color of the drink depends on the degree of roasting the malt before using it. Dark beer usually has a malt flavor with a slight bitterness.
Dark beer comes in several varieties. Porter is made from young beer, old ale and strong beer. It is a strong drink compared to other varieties. El is a variety that is not made in Russia, but only in England and in Belgium. It has a golden brown hue. Stout - very dark beer. It has a strong aroma and high viscosity. Stout is sweet and bitter. March beer is made on the basis of well-roasted malt. It contains a fairly high percentage of alcohol.
Beer pasteurization
Light beer is made by alcoholic fermentation of malt, to which brewer's yeast is added. Its color is determined by the type of malt used and the degree of roasting.
Dark wheat beer is made from wheat malt. Wheat germ is used in Europe. Wheat beer called summer. Its main advantage is the expressed quenching of thirst. It foams well, has a citrus flavor. Its subspecies are German wheat, Belgian white and sour beer. The names of countries in the brands do not say anything about the manufacturer, but only define the traditional recipes of preparation.
3
The processing method divides the beer into pasteurized, unpasteurized and laid out. Unpasteurized beer has a shelf life from a week to a month. Pasteurized - up to three months. Some varieties of the drink are made using special stabilizers that increase its shelf life to one year. A special 12% beer is also produced. Special beer is made by adding various flavors in the manufacturing process. The original beer contains an increased amount of hops. Along with this, non-alcoholic and low-alcohol beer is produced.
According to the fermentation method, the drink is divided into top-fermented beer - ales, bottom fermentation - lager, spontaneous fermentation.
Beer fermentation process
First prepare the malt, germinate the grain, dry it, clean. Then the malt is crushed and mixed with water. At the same time there is a release of starch to give the desired sweetness to the drink. This mass is called congestion. After this, the wort is prepared using mash filtration. It is a bright liquid. The wort is boiled with hops. Free the resulting liquid from the remnants of grain and hops. Cool the liquid, add brewer's yeast to it. After this begins the process of maturation. The drink is left for several months. At the end of this period brewer's yeast is removed from the resulting mixture. Now the beer can be pasteurized. It is heated to a temperature of 70 ° C. Microbes during pasteurization die.
In Russia, produced more than 150 varieties of beer. Currently, new varieties are being developed, differing from the rest by the composition of the grain basis, manufacturing technology, using original additives to create a unique taste.
The suitability of beer for consumption may be impaired by using low-quality raw materials. In this case, the drink gets a muddy look, foams over measure, begins to smell unpleasant. If, during the manufacturing process, dairy and acetic acid bacteria were admitted to the base, the beer may sour. Defect of a drink is easy to determine by taste. Such a drink may have a sour taste, too bitter or too sweet taste, bread taste. In case of poor-quality water purification, the beverage may have a chlorine flavor.
If we consider the types of packages of beer, traditionally popular is the packaging in glass bottles. It comes in a size of 0.33 and 0.5 liters per bottle. Bottles usually have a dark green or brown color. Some plants produce light bottles for beer, but they are less common. The design of the bottles gets some variety. In this case, the bottle should be convenient to pick up and drink directly from the neck in the absence of other utensils.
4
Another popular packaging is aluminum cans. They were first used in the middle of the last century, and in 1975 they had an “ear” for easy discovery. They do not need to be podkovyrivat keys or a cigarette lighter, if on the way wanted to drink, and special devices for opening bottles in a stall with beer is not available. Such banks very well preserve the taste properties of the drink. But their hygiene is questionable.
After buying a jar, it is better to rinse under running water before you start drinking from it. The can has tangible advantages over the bottle. It is environmentally friendly, since it can be compressed and handed over to the metal receiving point. It is much lighter in weight, contributes to the rapid cooling of the drink. It can be put for 10 minutes in cold water and the drink will be ready to drink. Designers do not work on the shape of the jar, because the focus is on the content and the label.
Beer in aluminum cans
The next type of packaging is plastic bottles. They produce beer with a volume of 1 to 2 liters. The disadvantage is that storage in such bottles reduces the shelf life of the drink. But they weigh 10 times less than glass bottles. Plastic bottles have a screw cap that is convenient for their use. They are cheaper in terms of the same volume of beer in glass bottles.
The last type of packaging - kegs. Keg beer appeared in Russia in the nineties of the last century. Kegs are small stainless steel kegs. They are equipped with special valves and faucets for bottling the drink in glasses. Opening beer with the help of various items is important if you bought a beer in a glass bottle. The metal cap of the bottle is provided with a grooved edge, to which a can opener conveniently clings.
5
How to open a bottle of beer? There are different ways. For example, a way to open a bottle with a magnet and a coin. Put the magnet on a horizontal surface. Put a bottle on top. Tap a coin over the narrow part of the bottle. After a few seconds, the cover will fly off.
A less harmless way is to open the bottle with your teeth. This can be done only confident in the strength of their teeth to people. It is not recommended to use ordinary teeth for these purposes. But manufacturers of dental implants in Argentina came up with a tooth-opener.
Opening a beer with a cigarette lighter
The fact is that rugby players very often lose their teeth in the game and then turn to the prosthetists. A tooth-opener with a groove at the end was invented for them, for which it is easy to hook on the bottle cap.
An even more risky way is to open the beer with the eye. In fact, it is opened not with the eye, but with the upper bone over the eyelid. The lid is hooked onto the bone above the eye and the bottle is strongly pulled. Get trick can not the first time.
How to open a bottle without risking your health? You can do this with a cigarette lighter. To open a beer with a lighter, you need to take the lighter in your right hand, turning the lighter upside down, that is, the bottom of the lighter should stick out of the hand. In the other hand you need to take a bottle. Bring the lighter close to the edge of the bottle so that it goes beyond the grooved edge of the cap.
Lighter on the cover to make it open up. If it didn’t work at one end, repeat the procedure around the entire circumference of the lid.
In order not to resort to the above-described tricks, it is better to buy a three-in-one penknife. It will also have a screwdriver and a can opener that can be used.
And a little about the secrets ...
Russian scientists of the Department of Biotechnology have created a drug that can help in the treatment of alcoholism in just 1 month. The main difference of the drug is HIS 100% NATURAL, which means efficiency and safety for life:- Eliminates psychological cravings
- Excludes breakdowns and depression
- Protects liver cells from damage
- Removes from a strong binge for 24 hours
- FULL REDUCTION of alcoholism, regardless of the stage!
- Very affordable price .. only 990 rubles!
I often have to hear the question: "How to open a beer bottle with a cigarette lighter?" Also, he may have various options with the use of other items and devices. As a rule, such a need arises in the absence of an opener. Sooner or later, each of the admirers of the foamy drink faced such a problem. The solution is incredibly simple.
The principle of operation of any beer opener comes down to the use of the most ordinary lever. Almost always at hand is something that can be used in this role.
Use a cigarette lighter or key
Any person with imagination is about how to open a beer with a cigarette lighter. This statement is true even if he has never seen the process itself.
The principle is simple. Get a cheap plastic lighter. It should be clamped in a fist so that the lower part of the body protrudes 1-1.5 cm from the side of the thumb. Another tip - right-handed people should do it with their right hand, and left-handers with their left.
After that, take a beer bottle in your free hand so that your fingers are closed closer to the metal lid. Then slip the corner of the lighter under the cover. After that, press the part of the lighter with the wheel so that the support for the improvised lever is the thumb with the bottle. This movement can be both smooth and sharper. The sharper you make it, the higher and more effective the cork will bounce.
The key point is that the angle of the lighter, rather than its flat part, slips under the cover.
Instead of a cigarette lighter, you can use any flat, rigid object. For example, the keys to the apartment.
Using the second bottle
Hold the neck of the beer bottle tight with your stronger hand. After that, press its bottom to any flat horizontal surface. For example, to the table or bench. In your free hand, take the second bottle and turn it upside down. Then align the teeth of the cap of the upturned bottle with the teeth of the first one. After that, the same principle of leverage works.
This method requires some skill and practice. But when you master it, the whole process will take you only a few seconds.
A sheet of paper works wonders
To implement this method, you will need any sheet of paper. It can be a newspaper, a magazine, or even a banknote. The main selection criterion is density. The thicker the paper sheet, the better.
Fold the paper in several layers. The task is to get a flat and as solid as possible plate. In the future, act as in the case of a cigarette lighter.
Considering that by itself any paper material is soft enough, you should not try to print a bottle of beer in one sleek movement. Act gradually, loosening the edges of the cover from several sides.
Eye Focus
In opening beer bottles, the question: “How to open a beer with an eye?” Is without a doubt the second most popular. This trick is often called uncorking a bottle with eyebrows.
To begin with, this is really the focus. Despite his simplicity in a friendly company, he always goes with a bang. For his performance must meet several conditions.
The eye can only open the plug on the thread. You will need a little time to prepare.
So, in advance open one of the bottles. This should be done imperceptibly to others. For example, going out for a foamy drink in the kitchen. After that, make a cork back. The main thing is to keep it tight enough and not to be loose. But too much should not be delayed.
Then we bring the bottles and place them on the table. Of course, you should leave the one that passed our special training. Then you should attract everyone's attention with some bright phrase. Something like: "Well, shake the old days." Then hold the beer bottle to your eye, clamp the cork with your eyebrow and turn. Yes, do not forget for the plausibility to make a sound: "Shhhhh."
Then enjoy the reaction of friends. The main thing is to come up with an excuse in advance to request a re-demonstration of the methods on their bottles. You can say that more than one at a time can not be opened, but it will be a bruise.
How to quietly open a beer can?
Sometimes you may need to silently open a beer can. Make it not easy. This is due to the tightness of the metal container.
Just get rid of the loud sound is not possible. But if you put a jar under a thick blanket or pillow, it can be largely suppressed.
The second option is to open the can without attracting undue attention, it is to mask the process with another sound. Turn up the music or TV. You can also cough.
In a large company at a picnic, a party or at home, there is always a connoisseur who demonstrates how to open a cigarette lighter and other skills for "survival."
How to open a bottle with a cigarette lighter
Opening a beer without an opener is harder than with it. But with a cigarette lighter it can also be done quickly and easily. First, hold the bottle firmly by the neck so that the thumb and index fingers are close to the cork. Remember the way the lever works, the lighter is what it is, it performs a similar function.
Slip the cigarette lighter under the cover and press it on the opposite side. If you do everything right, then with the help of a lighter you can get a lot of open bottles and satisfied, respectful friends.
Using another bottle
Often in the arsenal there is more than one bottle of beer, each of them can play the role of an opener for the other. Not knowing exactly how to open the bottle with another bottle, many are trying to couple the cloves of the lids and pull the bottles. But it's not right.
The principle of operation is the same as with a cigarette lighter. We grip the bottle, but already a little further from the cap (the distance should be approximately equal to the diameter of the cork). With the edge of the lid of the second bottle we rest against the teeth of the first. The movement is the same - click on the second vessel with a drink that plays the role of a lever, the first one opens. This method is not practical only because there will be nothing to open the last bottle. 
Opening with keys and rings
Not everyone has a lighter, but everyone has a house key. The way of opening a hop drink with keys is no different from the previous two. The lever method can be applied to everything. We take the key, grasp the neck of the bottle as close as possible to the cork and press the key so that it fits the cap.
Often girls prefer rings. It will help open the beer. Without removing the jewelry from your hand, you just have to put your finger on the bottle cork so that the ring can hook on the cloves. With a sharp movement, jerk the bottle down or pull your hand up. Be careful with soft metals, the golden ring can easily bend. 
Other ways to open beer suitable for girls
The girl does not always have a lighter with her or may be afraid to spoil her ring, so there are several female ways to open a bottle of beer without an opener.
The nail file is in the beautician of every woman of fashion. With its help, you can open the container on the principle of keys, the main thing is to do it carefully, because a thin file can break. Just pry the cap with a nail file in several places, the bottle will open easily, once you put a little effort into it.
Even in the arsenal of girls may be a piece of notepad or magazine. How can I open a beer with a piece of paper? Everything is easy. Paper is suitable for printing on the printer, it is thick and durable, often used banknote. Tightly twist the sheet to the maximum, bend in the middle. We apply the already familiar principle of the lever. We grab a beer, pick up the lid with a piece of paper, open the bottle. 
One of the easiest ways is the opening of beer with scissors. You need to put one blade under the cover, trying to slightly cut the cork. Do this with each tooth until you open the intoxicating drink. A few cuts are enough to hear the hiss of a drink.
You can also open a beer on the countertop. Having strengthened a cover in a table edge, strike from above a hand. Instead of the table, you can use stone, steps, curb, railing, benches. Be careful with metal surfaces, because the neck will crack if you apply more force than is required. Be careful with wooden surfaces as you can easily ruin the furniture.
Spoon, too, easily cope with the task. It is necessary to use not the handle, but that part of the device with which we eat. You also need to pry the cap of the beer bottle and press the spoon. As a result, the cork will pop off, you will get an open bottle.
You can even open the disc with a disk if you hit it with an edge on the bottom of the cork. Important: with this method, be careful, because the disk may rebound, injuring your face or causing injury to other parts of the body.
There is a mass of creative ways and objects suitable as a beer opener. This may be a heel shoes, stapler, belt buckle, children's skates, a safety belt in the car, nippers, pliers. Often used doorknob, phone charger, screwdriver, hammer, fork, laptop, carabiner, can of lemonade. With all these items, the principle of leverage already mentioned more than once works. These items are not always at hand, but if they are, then why not try?
There are ways you should not trust - open your beer with your teeth and eyebrows. Some "craftsmen" pick up the cover with their lower teeth, turn the bottle, and, pressing the metal with the upper row of teeth, open the beer. As for the eyes, people latch the top (above the eye) bone and sharply pull the vessel with the beer. Not all teeth and bones can withstand such a load, it is better to find a safe method, because the consequences are terrible.
There are girls who know how to open beer with their own breasts. It is not recommended to even try this, using this method, it is easy to break a weak chest bone.
At a picnic, you can use the wheel of a bicycle, shove a bottle between the spokes of the wheel and pull it so that the lid suddenly falls. This method also should not be trusted, because the spokes are unlikely to survive. Using this method can result in a lot of beer, then there will be no point in opening it.
The most dangerous way is a chainsaw or grinder. Avid fans of extreme sports often turn to these subjects. Be careful with such experiments, because you can lose not only traffic jams, but also fingers. It is better to take with you a bottle opener or something from the above.
Among the presented methods, you can choose the most secure, allowing you to put a minimum of effort to open the intoxicating drink. And do not forget about it, use it in moderation.
If you have a cool beer in your hands, but the bottle is closed and there is no opener on hand, the situation can be quite disappointing. However, do not be discouraged! There are nine great ways to open a beer bottle with the help of available tools, and you don’t even have to risk your health and try to use your teeth.
Lighter
In any group of people there is usually at least one person who smokes, loves candles or just used to be ready for anything. Lend a lighter from him, turn it over so that the upper part is in your hand, and with your other hand hold the neck of the bottle tightly. Position the lighter, like a regular opener, under the cap and use the same movement. A little effort and the foam bottle is open! 
Book
You will need a paper book, not too thick, but not as thin as a magazine. The edge of the book should be squeezed in the hand in the same way as when using a lighter. Using it as an opener, you can easily remove the lid from the neck and quietly enjoy your favorite drink.
a door
You will be helped by a hole for the lock in the door frame. Simply hook the metal cap over the metal edge and pull the bottle down with the maximum effort possible. An instant result is waiting for you - the bottle will be immediately opened! 
Phone charger
This method is a bit more complicated than the previous ones, because charging is not big at all, which means that you will have little space for support. It is not comfortable. Nevertheless, you can easily cope with the help of charging, using its back part as a lever. If you manage to find a comfortable position and firmly squeeze the charger, you can remove the cap from the beer bottle with it. 
Spoon
Perhaps you simply have nothing to open the bottle with, but there are still other cutlery. In this case, take a spoon and using its handles, remove the cap from the beer bottle just as you would with a bottle opener. It is very easy and fast. The main thing is to take a spoon from solid metal, since aluminum can bend strongly and lose its shape.
Stapler
If you have office supplies at hand, a stapler may be useful. However, it is worth considering that this is a rather complicated method, as is the case with a phone charger. Remove the staples from the stapler, and then open it and turn it over so that the metal part falls under the edge of the beer cap. Try to find a comfortable position for your hand, it can be quite difficult. Use your finger as a lever and the bottle will open. 
Table
This is a classic method that also looks spectacular. You need a fairly strong table, the surface of which is not too scary to scratch. You need to hook on the edge of the bottle cap, and then hit it on top with your hand to knock it down. That's all! It is not surprising that this method has become so popular and widespread. Cope under the force of anyone.
Machete
This method looks extremely impressive - you will want to use it, even if you have a bottle opener at hand. Be extremely careful, as this method can also be dangerous. Use the blade of the knife: position it at the edge of the cover and sharply move the blade up. The cover should instantly be removed. But remember, you were warned that while using a machete, you can get hurt! Use this method at your own risk. 
Other beer bottle
Take two beer bottles. Hold one by the neck, and turn the other upside down - you will not open it. Hold one lid on the other, hold the other tightly so that the bottle does not open, and then jerk hard. The cap on the first bottle should be easily removed.
