Have you decided to become the happy owner of Jacuzzi? We'll tell you how to choose a hot tub that suits your functionality, but at the same time, do not overpay for unnecessary frills.

A hot tub or jacuzzi is not just a bath for water treatments, it is also a preventive bath with a therapeutic effect that will make you a hydro massage or help you to relax.

It will help with insomnia, stress and chronic fatigue. It improves blood circulation and metabolism.

Pay special attention to:

  • shape and size;
  • production material;
  • installation features;
  • additional features.

  The main types of Jacuzzi

Hydromassage baths are ordinary and combined.

In conventional jacuzzi jets are located in the sides, and the massage takes place with the help of air-water jets.

Combined hydromassage baths are equipped with air jet nozzles for air bubble massage and hydromassage nozzles, with their help air-water massage is performed. The best effect is obtained when combining these two types of massages.

  Jacuzzi size and shape

The shape and size of the hot tub depend on the size of the room and operating conditions.

It should not only look beautiful and fit into the interior of the bathroom, but also be comfortable to use.

Sizes range from huge baths like a small pool designed for 2-4 people to very small seated.

The best option for one person would be a hydromassage bath with a depth of more than 45 cm and a length of about 180 cm. Otherwise, you will not be able to lie in it.

There are three main forms of Jacuzzi:

  1. rectangular;
  2. corner;
  3. round.

The rectangular bathtub is suitable for both large rooms and small bathrooms.

Corner better fit into one of the corners of a small room.

A round bath is the best option for large rooms.

When choosing the shape and size of the Jacuzzi, you need to consider the possibility of leading the plumbing, sewage and electricity.

Do not forget about its further maintenance, so that to replace a failed one injector it was not necessary to dismantle the entire bath.

  Manufacturing material

Modern hydromassage baths are made from:

  • become;
  • cast iron;
  • acrylic.

Steel Jacuzzi

Advantages:

  • lungs,
  • can be installed on simple legs without special devices,
  • durable
  • cheapness.

Disadvantages:

  • poorly kept warm due to the high thermal conductivity, resulting in increased consumption of hot water,
  • at a set of water and work of the equipment strongly rustle,
  • with careless operation chipped,
  • small variety of forms.

Cast iron

Advantages:

  • retains heat for a long time
  • chemical resistant,
  • mechanical strength
  • durability,
  • well absorbs the vibration created by the pump.

Disadvantages:

  • big weight
  • enamel chips are possible upon impact,
  • high price,
  • small variety of forms.

Acrylic bath

Advantages:

  • most hygienic and clean;
  • retains heat well
  • scratches and minor mechanical damage are easily eliminated,
  • does not fade,
  • easy that facilitates its installation,
  • immune to infrared and ultraviolet rays
  • throughout all term of operation will keep initial appearance,
  • a huge variety of shapes and designs
  • warranty over 10 years.

Disadvantages:

  • when installing the necessary rigid frame.

Acrylic is the most common material for the manufacture of baths with hydromassage.

  Specifications

The power of the hot tub, the quality of the massage and its variety depends on the installed equipment.

The equipment includes: a pump, a compressor, nozzles, pipes and a control panel.

Pump

The pump regulates the power of the jet of water from the nozzles. Cheap models contain one pump, but note that its power should not be less than 600 watts.

More expensive combined whirlpool jets with aero massage also contain a compressor for mixing water with air. Also, for each group of nozzles there may be a separate pump; this will increase the power and amplitude of adjustment of the water jets.

Nozzles

Cheap jacuzzi contain one group of side jets for a general massage, about 3 pieces on each side.

Expensive baths may contain additional groups, for example for the back. But remember that the more nozzles, the more powerful the pump should be, and it is better if a separate pump is installed for each group.

Nozzles can be more difficult to replace metal ones, and plastic service life is less, but they are more functional.

Remote Control

Manages the entire process of massage special remote. It can be pneumatic or electronic, remote or stationary.

The electronic control panel is more functional, it can program special massage modes, as well as control the additional functions of the hot tubs.

  Additional functions

More expensive models can be completed with additional options:

  • disinfection system;
  • backlight;
  • aromatherapy;
  • chromotherapy (water jets change color);
  • multimedia (video player, music, radio, etc.).

  The price of baths with hydromassage

Gone are the days when the jacuzzi was a luxury that only very rich people could afford. If desired, you can buy a hot tub economy class.

When deciding on the price, please note that the installation and preparation of communications for connecting a jacuzzi can cost you a third or even more of the cost of the bath itself.

Find out if the model that you like requires pre-treatment, as this may incur additional costs.

You should not buy the cheapest, but you don’t need to chase after expensive models, they may have absolutely unnecessary functions for which you will have to overpay. It is better to choose the "golden" middle of well-known manufacturers.

  Precautionary measures

  1. For a better awakening, the morning bath should be no more than 10 minutes with a water temperature of about 30 ° C.
  2. In the evening, for a relaxing and better sleep, you can be in the hot tub for 30 minutes at a water temperature of about 37 ° C.
  3. Water temperature should be constant.
  4. If you like hot baths more than 39 ° C (although this is not entirely useful), then wrap your head with a wet cold towel.
  5. Try to avoid physical exertion right after water procedures.
  6. It is useful to apply a moisturizing and softening cream on the body.
  7. If you have heart problems, you should consult a doctor.
  8. As with the purchase of any other technology, of course it is better to give preference to well-known companies that have been manufacturing the jacuzzi for many years.
  9. Be sure to learn about the warranty and after warranty service and service centers in your city, so that it will not be a surprise for you in case of breakdown.

Humanity has long known about the beneficial properties of water procedures, but the hot tub is an invention of a not so distant past. Before choosing a whirlpool bath, in order for its quality and the cost of such a product to be high enough, it should meet the required requirements, it is necessary to understand some of the design features, analyze the quality of the materials used and the ability of the equipment to produce the desired therapeutic effect.

A bit of history

Historical note: The effect of quicker recovery of patients taking water procedures, discovered in 1936 in Berlin, when massage therapists massaged their body immersed in a bath or pool with a hose from a hose under a small excess pressure, was very quickly used by physicians to treat a wide range of diseases . And in 1948, an Italian-American, Candido Jacuzzi, the inventor and manufacturer of airplanes and equipment, wanted to help his son recover, used a pump immersed in a bath to create a pulsating water jet.

This device became the prototype of the equipment so popular today. Of course, modern devices are strikingly different from their great-grandmother, but the principle of combining water, air and massage still helps people maintain health and good spirits. Do I need a hot tub in a regular apartment? Most likely, yes, because there is nothing more valuable in life than your own health.

Problem of choice

Going into any building supermarket or specialized plumbing equipment store you can find a huge number of hot tubs of various sizes and configurations. And in order to answer the question of which whirlpool bath to choose, it is imperative to have a correct idea of ​​its structure and purpose of certain elements. After all, this is not just a bath, but a very complex technical device with a mass of various characteristics.

“Advise a hot tub,” the buyer asks the sales assistant. And he will listen to a long story about various devices, absolutely not understanding the essence of the question. Such an approach can not only disappoint him after the purchase, when the equipment does not justify the hopes placed on him, but can also lead to a rather significant waste of money.

Is material so important?

Before making a choice of a bath with hydromassage from the whole variety of models presented, it is necessary to take into account the peculiarities of the use of certain materials:

  • Steel baths. Hydromassage systems, made of cold-rolled steel and equipped with a nozzle system, are lightweight, can be installed on simple devices in the form of legs, are quite durable and are easy to process. However, they also have a number of significant drawbacks. Increased noise in the operation of equipment, increased consumption of hot water due to rapid cooling and the main drawback is the simple form of the products;
  • Cast iron baths. They have high mechanical strength, increased heat capacity and good ability to absorb vibrations, which inevitably arise when the pump or compressor is operating. But the large own weight and complexity of processing, which entails and the high cost of iron products can adversely affect the choice of a hot tub;
  • Baths of plastics.   The best bath with hydromassage, which has received the most widespread use, is a bath made of modern plastics and covered with a sufficiently thick layer of acrylic. Excellent thermal insulation, almost no noise and a huge variety of shapes.

The need to use special installation devices, considered as a disadvantage, is leveled by the presence of all the necessary items in the factory package.

My favorite color ... my favorite size ...

Like any equipment installed in a bathroom, a bath occupying one of the central places should be not only comfortable, but also beautiful:

  • standard rectangular models adapted for installation in small bathrooms of Soviet-built houses;
  • elite rectangular bath with hydromassage, equipped with numerous accessories and sophisticated programmable equipment
  • corner models for one or two people;
  • round volume pools for more spacious rooms.

Modern materials and methods of painting have allowed manufacturers to significantly diversify the color range of the products offered.

And if the color of the bath is chosen according to the general color concept of the room, then the shape of the bath is dictated, as a rule, by the size and ergonomic features of the room.

Important! The complete set of a hydromassage bath implies the possibility of its periodic maintenance and it would not be desirable to perform complex dismantling works when it is necessary to replace one small nozzle.

What's inside?

So do you need a whirlpool in a bath for an ordinary person who feels completely healthy? The relaxing and toning effect of the massage, of course, will only benefit, but the quality and effectiveness of the massage depends on the specific equipment installed in the model. So, the choice must take into account:

  • Pump and its performance. On simpler models, as a rule, one pump is installed within a small range, changing the intensity of the water jet. In more expensive devices, in addition to the pump, an air compressor is installed, supplying air to the nozzles and creating the effect of a natural geyser, and the most elite hydromassage baths have several pumping units for each group of nozzles;
  • The number and performance of the injectors.   The best whirlpool bath has several groups of nozzles. These are side jets for general massage and special bottom ones for back massage. The intensity of the massage jets depends on the number of nozzles with the same pump performance and, if it is insufficient, such water treatments will be equivalent to bathing in an ordinary bath;
  • Control system.   All installed equipment is controlled by a system that can not only monitor the presence or absence of water, and regulate the pump capacity. And the more complex the equipment, the more complex and "smarter" the control system, sometimes including several microprocessor devices.

Periodic service

When deciding which whirlpool to choose, you need to pay close attention to the need for periodic maintenance and additional water treatment. The nozzles made of high-quality materials will be able to withstand easily the deposits that inevitably arise when they come into contact with water, and the pump impeller, which is less subject to wear, will be able to maintain the necessary pressure in the system for a longer time.

You need to know: Even the delivery tubes of the cheapest systems may require replacement after a short time, which will entail additional costs.

Are there any disadvantages?

Any equipment operating in difficult operating conditions has its own advantages and some disadvantages, and hydromassage systems in this matter are no exception. The pros and cons of hydromassage baths have been known for a long time, but if the buyer-consultant will be told in detail about the advantages in detail, then in most cases you will have to look for the drawbacks yourself only.

The main disadvantages of hydromassage baths are associated with the complexity of cleaning and disinfecting the pumping system and pipelines, in which, thanks to the constant presence of a moist environment, favorable conditions are created for the reproduction of microorganisms that are not always useful to humans. Texas microbiologists have identified bacteria associated with human waste, fungi and deadly staphylococcus in water supply systems. Therefore, a self-completed table, in which there are only two columns: a hydromassage bath for and against, will help you choose the right model or just refuse to buy.

It's time to talk about the price

How much a whirlpool bath costs depends on many factors, but as the rating of whirlpool baths from different manufacturers shows, it is possible to notice a pattern that models of the average price category, and well-known European manufacturers, are in the greatest demand. Most buyers are in no hurry to buy neither the cheapest nor the most expensive models, but they want to get good quality by sacrificing numerous features.

Important! Some models, and it is necessary to find out before the purchase, require mandatory after-treatment of water, so when calculating how much a hot tub costs and its installation, it is necessary to take into account that the cost of the cleaning system can be up to one third of the cost of the bath itself.

Asking yourself how to choose a whirlpool bath and which whirlpool bath is better, each person will respond to it individually, but for a more correct answer, you should carefully analyze the possibility of installing it in the bathroom, calculate direct and indirect costs and choose a reasonable price model. This bath is the best for you.

Baths like almost every one of us, because spending time in a hot lush skin after a hard day’s work - there’s no better way to relax. Therefore, baths are often preferred to showers.

Today we have the opportunity to consider improved versions of baths, as devices with hydromassage. Hydromassage baths or, as we more often hear the Jacuzzi, are specially designed devices for preventive procedures of water or air massage, just relaxation and comfortable conditions for taking a shower.

The main feature of the Jacuzzi bribes us in a simple way to get rid of insomnia, joint pain or chronic fatigue. A healthy body needs several sessions of this hydromassage and the body will replenish itself instantly.

If you are considering buying a bath with a hydromassage, its choice should be approached as carefully and scrupulously as possible. The device is quite expensive, directly affects your body, and takes a lot of space in the bathroom. Consider the Italian new plumbing in more detail.

Jacuzzi came from Germany

Jacuzzi device

The main feature, and therefore the main part of the jacuzzi is the hydromassage system. It consists of a compressor, a special pump, several nozzles, nozzles and directly the control panel, either mobile or built-in.

It is very important to take into account when choosing a product the number of nozzles, because their number directly affects the power of the jacuzzi. This figure also affects the volume of the bath. In some cases it is more advantageous to purchase a pump separately from the bath: when the nozzles are located on the back of the bowl when the bath volume is above average.

The average performance of the bath ranges from 700-800 W; more equipped models assume a power of 1500 W.

The control panel sets the mode, intensity, time and other additional functions.

Despite the complete protection of the hot tub system, the device requires careful and proper care.

A certain number of nozzles are located on the walls of the bowl (hydromassage) and at the bottom of the bath (aero massage). Please note that some models allow you to adjust the angle of rotation of individual products.

In addition to the main bath system, the jacuzzi is often equipped with headrests, armrests, steps, handles on the sides, jumpers for towels and shelves for bathroom accessories.

Jacuzzi interesting form

A variety of models in the domestic market

The main feature of each whirlpool is to choose a massage method using air or water. Consider the main features of each solution.

Types of Jacuzzi on the principle of the device:

  • usual bath: massage is carried out by means of standard air-water flows; jets are located on the sides of the jacuzzi bowl;
  • combined bath: a more effective massage occurs due to the operation of air-water and air-bubble flows; bath of the combined type involves in its work both hydromassage and aero massage nozzles; This option, of course, enjoys great interest because of more efficient procedures at the expense of air and water at the same time.

Hydromassage is a very popular function, its effect and the pleasure of massage provided wide popularity and demand, which explains the hydromassage sprays for shower boxes.

However, to feel the aero massage, the more combined (turbo massage) is possible only in a classical Jacuzzi bath. According to consumer reviews, the massage directed by the air flow is much more efficient and more pleasant than water jets. Turbomassage affects your body more intensely.

Hydro massage in the shower

Considering the ideas of the whirlpool bath, pay attention to the shower boxes (note, not the booths). The shower box is a complete technology, including a spacious bowl, walls like a booth and a hydromassage device, thanks to a special sprayer.

This product was created specifically for those who could not leave the bathroom, but at the same time understands the economic advantage of the soul. Shower boxes with Jacuzzi function allow you to enjoy the hydromassage while standing under the water flow, and lying in the bathroom you can feel the aero massage.

Be extremely careful, because manufacturers offer shower boxes and without aero massage, so carefully read the list of additional functions.

Corner shower

Exotic massage

Despite the "biting" cost of the hot tub, and so on, European manufacturers offer even more expensive options, equipped with quite unusual functions.

For example, with the exception of the classic aero- and hydromassage, you can enjoy an ultrasonic type of massage. According to manufacturers and research of new technology, the practical impact of ultrasound is impossible, but the body still grasps huge benefits and enhances the effect of standard procedures.

Such unusual devices produce the leading names of the world, while not quite popular in the vast domestic market.

Types of Jacuzzi at the place of exposure

  • through the bottom of the bowl: as a rule, the bottom of the tub is equipped with nozzles for air flow; therapeutic effect is felt back, buttocks, lower back, back of the thighs;
  • using the side walls of the bowl: the location of the nozzles for water jets is clearly thought out, as they are installed opposite your shoulders, feet, sides and shoulders;
  • some water management systems allow you to turn on all the jets at the same time or in turn, as you wish, you can feel an intense massage of the whole body or gradual, starting from the feet to the shoulders and vice versa.

Given the basic rules of the device nozzles on the walls and bottom of the bath, almost every manufacturer offers its own principle of placement.

Jacuzzi come in a variety of forms.

Additional Jacuzzi Bath Functions

Choosing a jacuzzi type bath will force you to reconsider the many choices of quality and vice versa. Given the functionality of such an attractive device, pay attention to a number of additional features that are both necessary and just enjoyable.

Options for additional features:

  • ultrasound massage;
  • aromatherapy;
  • backlight;
  • musical accompaniment;
  • equipping with a disinfection system;
  • chromotherapy;
  • sets of auxiliary mixers;
  • phone;
  • other.

In order to identify your preferences in advance, you should try out some procedures before you buy, for example, in a spa, a sports complex, a sanatorium or a hotel. Only in this way will you be sure that the body is ready for such procedures regularly.

Connecting the jacuzzi to electricity is quite problematic

Manufacturing material

In addition to the additional functions, your choice is properly influenced by the production material, which directly determines the service life of the device.

Material options:

  • steel;
  • cast iron;
  • acrylic.

It is not necessary to remind once again that products made of iron and steel have long been forced out of the modern market by more unique models of acrylic.

Of course, steel and cast iron have several advantages, such as resistance to mechanical damage, endurance, endurance of large loads and high service life.

However, the list of shortcomings is more than high:

  • cast iron is too heavy, which complicates the process of installation and installation;
  • steel is too noisy when typing water;
  • the surface of both materials quickly becomes useless, the enamel breaks off;
  • cast iron, like steel, does not retain heat too long;
  • the choice of sizes and shapes is rather limited, which is unprofitable for modern apartments with small bathrooms.

Hearing the name "cast iron", we remember the classic bathtubs of domestic production, which are still installed in our bathrooms and, it would seem, they will stay there for several decades.

But today we need not only strength and high service life. Now, aesthetics, a variety of shapes, sizes and possible additional functions are needed, which radically changes our idea of ​​cast iron as the best material for modern hot tubs.

As for acrylic, the situation is radically different. The material is more popular than ever and used in almost every industry. And the bathroom equipment for the bathroom is full of this material.

So why is acrylic so profitable material for the production of hot tubs?

Advantages of acrylic jacuzzi:

  • high elasticity and ease of processing allow you to create a product of any shape and size;
  • material allows the installation of any number of nozzles;
  • the weight of the hot tub from acrylic is small;
  • acrylic, durable, resistant to mechanical shock, chipping and loss of color;
  • an acrylic product is easily restored by hand;
  • material retains the heat of hot water for a long time;
  • acrylic is easy to clean, does not trap dirt and is not a favorable breeding ground for bacteria;
  • for the human body, the material is the best option, both for touch and for blood flow;
  • the surface does not fade in the sun, as it is resistant to UV light; even after several decades the jacuzzi will not lose its appeal;
  • the warranty period directly bowl, without a hydromassage device, reaches 10 years.

Such a long list of advantages can not but rejoice, especially considering the very reasonable cost of such a unique material. Proper operation of the jacuzzi

The pledge of the long-term service of the hot tub is appropriate care and compliance with all operating rules.

For example:

  • install water filters: any lint and dirt can clog the nozzle system;
  • mechanical cleaning of salt precipitation is necessary, the use of abrasives is prohibited;
  • consult with a specialist on disinfectants that prevent the formation of various microorganisms and extraneous odors; this advice is necessary if the bath is not originally equipped with disinfection; It is recommended to perform a disinfection session after every eighth operation of the whirlpool;
  • the use of gels, soaps, shampoos, bath foam is strictly prohibited when the nozzles are on.

What do experienced whirlpool users think?

Despite a lot of advantages, popularity and high demand for hydromassage baths, the reviews about them are quite contradictory.

For example, such a system is contraindicated for pregnant women, children, the elderly, and, in general, those who have heart problems and blood circulation.

Consumers say that cleaning a jacuzzi takes a lot of time and patience, and those who lack it are totally upset with the hydromassage system. However, many housewives recommend for the sake of their children who love to lie in the bubbles spend a little personal time.

Acrylic Jacuzzi

What material is the hydromassage bath made of?

Acrylic is popular, but you can find bathtubs made of steel and cast iron. Acrylic, due to its plasticity, is easy to handle, creating baths of all shapes and sizes. It is also easy to install massage jets in any quantity. In addition, the baths are durable, but light, they are easy to restore, and they keep the water temperature for a long time.

Cast iron baths are cheaper, but their main disadvantages include weight, complexity of processing, which limits the variety of shapes, as well as the inability to install many nozzles. Another major drawback is that it is almost impossible to restore the enamel chips.

Cheaper all baths from steel. They weigh less than cast-iron ones, but more than acrylic ones, their forms can be different, and their strength is high. But many people refuse baths because the water cools quickly in them and they have low noise insulation. When the water is poured, relax especially not work.

About massage zones and jets

Bath can enjoy two types of massage - water and air. Hydromassage is carried out with the help of jets of water mixed with air, and aero massage only due to air. The more nozzles of different size and type, the greater the variety of massage programs, and therefore, the greater the pleasure and health.

Nozzles are placed on the walls of the bath. The minimum number of 4-6 devices located in the lumbar region, sacrum, sides and legs. In more complex designs there are from 2 to 4 large jets for back massage, as well as a pair for the neck and for the feet. If the bath involves a shiatsu massage, then the nozzles in it can be from 10 to 80.

Nozzles for aero massage are located at the bottom of the bath. Their function includes the saturation of water with oxygen and gentle massage.

Depending on the model, the nozzles can be adjustable or fixed.

How the structure is arranged and how the control takes place

Air and water are pumped by the pump, which is powered by a motor. Engine power directly affects the quality of the massage. The more nozzles, the higher the power - up to 1500 V.

You can control the power of the massage, the modes and distribute the work of the injectors using the remote control. He, in turn, can be remote or installed on the side of the bath.

Extra comfort of the bath is provided by silicone armrests, steps, handles on the sides, shelves for shampoos and towel holders.

How to take care of the hot tub and keep it safe

The better to take care of a hot tub, the longer it will last. First, there must be filters for water purification, otherwise the smallest impurities can clog the nozzles. Disinfection of the bath is obligatory, which protects from both infections and odors. When the nozzles are turned on, foaming agents cannot be used - this can lead to blockages and their decommissioning.

How to get maximum benefit

No need to hope that hydromassage will save from or help to lose weight, but you can be sure that stress and fatigue after taking a bath will be a thing of the past. The severity will go away, and new forces will appear. Hydromassage baths are contraindicated in those who suffer from heart disease, hypertension, thrombophlebitis, or have problems with venous circulation.

After a hard day of work, a hydromassage bath is the ideal solution to relieve both physical and psychological stress. There are several options, so it is important to know the features relating to the choice and use of such baths.

Pros and cons of the bathroom with hydromassage

Before buying any expensive equipment or equipment, it is recommended to analyze the existing advantages and disadvantages. Thanks to this, it will be possible to decide whether a hydromassage is needed in the bathroom or whether it can be saved. Existing benefits:

  1. Promotes healing of the body, improving blood circulation and denying a tonic and relaxing effect. There are advantages from a cosmetic point of view, because the hydromassage eliminates.
  2. Some models are multifunctional, combining hydro and aero massage, chromotherapy and so on.

Bath with hydromassage and has disadvantages:

  1. If you compare with ordinary baths, then for the additional function of the "hydro" will have to pay more.
  2. To operate the equipment you need to connect to the electrical network, which implies additional spending on electricity.
  3. For many, a significant drawback is the installation features and the need to regularly flush the pipes.

How to use the hot tub?

All models come with their own instructions, which describe how to properly use the bathroom. There are a number of general recommendations that should be considered:

  1. Although the massage bath is relaxing, hydromassage sessions should not be too long. It should start with short procedures for 10-15 minutes. gradually increasing the time to 30 minutes.
  2. It is not recommended to collect too hot water, so ideal indicators are 36-39 ° C. For a tonic bath, it is better to use cool water up to 30 ° C.
  3. If while taking a bath with hydromassage there were unpleasant feelings, then you should stop the session. For your own safety, it is recommended that you first consult a doctor.

Best whirlpool bath

The stores offer a wide range of models, so it is important to know what you should pay attention to in order for the purchase not to disappoint in the future:

  1. First, consider the size of the equipment, since it is important not only the place to install, but also the ability to deliver it to the site, since the hydromassage baths are supplied assembled with all tubes and nozzles.
  2. The most popular are acrylic hydromassage baths, which are not as noisy as steel and not as heavy as cast iron. Due to the plasticity of the material, you can create original forms.
  3. In addition to hydromassage in the bathroom, additional functions can be used, for example, aero massage. There are models that use swirling jets that create whirlpools. Used in the baths and light jets for original color effects. Useful additions include the headrest, side rails, ionization, disinfection, automatic cleaning, voice control, and so on.

Corner whirlpool bath

If the area of ​​the bathroom is small, this is not a reason to refuse to install the bath, since space can be saved with the help of corner baths. Traditionally they are performed in the form of a fan opened at 90 °. In addition, you can find an acrylic bath with hydromassage in the form of a petal or in the form of a trimmed drop. You can install it in any corner of the room, since manufacturers duplicate models in two versions, that is, making left-sided and right-sided baths.


Round bath with hydromassage

If the area of ​​the bathroom allows, then you can install a round bath. In most cases, models are made of acrylic, as it is a very convenient material necessary to obtain the desired shape. If you are interested, you should take into account that in some variants the volume of the bowl is small and it’s not possible to accept the horizontal position in it. The diameter of the comfortable baths can vary in the range of 150-200 cm. It should be noted that there are recessed and outdoor round options.


Double bath with hydromassage

In modern interiors, you can often see large baths that can fit two people. This is the perfect solution for lovers of romance. A large whirlpool bath can have a rectangular and figured shape. Due to their large size, manufacturers can install many additional functions in such devices. In most cases, there are several programs on the hydromassage and jet to relax the muscles. You can install a bath with a hydromassage with a side waterfall.


Hot tub treatment

In order to be able to enjoy the hydromassage for a long time, it is necessary to clean it regularly. There are a number of tips on how to care for a hydromassage bath:

  1. To make the acrylic bath shine, use a soft sponge and special products that do not contain abrasive particles, ammonia, acetone and other solvents to clean it.
  2. For disinfection, fill the bath with water at a temperature of 20 ° C so that its level is higher than the nozzles. Add 1.5 liters of 5% bleach solution or a special disinfectant. Turn on the hydromassage for 10 minutes. After that, turn it off, drain the water and refill the bath. Turn on the hydromassage for a few seconds to remove residual product, drain the water and rinse the surface from the shower. Perform the procedure once a month.
  3. To clean the nozzles from water stone deposits, fill the bath with water, as in the previous method and add 1.5 liters of 10% solution of citric acid or vinegar. Turn on for a few seconds to mix everything up, and leave it at 12 o'clock. The end of this procedure is identical to the cleaning option discussed above. Hold it once a year.