Fallout 4 electrical wiring, what for. Food and clean water

Post-apocalyptic world in Fallout 4 dangerous and you can never predict what will lie in wait for you over the next hill. Exploring the vast expanses, you can easily say goodbye to your life. To take a short break, the player is forced to visit settlements from time to time, i.e. safe areas. In which you can sell found items, buy ammunition, repair armor, or simply throw all unnecessary junk into the workshop. How many settlements there will be and how developed they will be will entirely depend on the player. But to create at least one you need to follow some instructions.

Recruitment beacon

Once you have decided on the place where you want to build a settlement, you will need to make a radio beacon. To do this, you need to go to the workshop and in the “food” menu find the “miscellaneous” category. If you are missing any spare parts, you can disassemble almost any thing on the street. As soon as the lighthouse is operational, new residents will gradually begin to come to you.

Accommodation of residents

Before those who want to move into your village come, you will need to do a lot of preparation. First, we need to put up beds for future settlers, where they could rest. You can actually build the entire house, the game allows this and even encourages it in every possible way, in the form of experience points for constructing various kinds of buildings. But this activity is not for everyone, since not many will spend their time building a house from scratch. Therefore, you can place beds almost anywhere, even on the street.

Food and clean water

Construction of water treatment plants in Fallout 4 a prerequisite for the normal existence of each settlement. But they are only suitable if there is a pond or river nearby. For all other cases, you will have to install a water column, which can be placed anywhere on the ground, but here
It produces little water. However, there are also advantages: the small size allows you to place several speakers on a small piece of land, and besides, the player can replenish their lives, which will help save a lot of money at first.

Each resident consumes one point of water and food per day, which means they must create enough of these resources to support themselves.

With food, everything is simple, in order not to die of hunger, the settlers must engage in agriculture, but in order to start growing anything they will have to find or buy the fruits of one of the cultivated plants. But if in the case of water extraction everything happens automatically, then people will have to be assigned to harvest the crop. This can be done in the construction menu by approaching the settler.

Settlement defense

While your character travels through a huge open world Fallout 4, Your settlements can be attacked by various groups, from raiders to super mutants. To protect your residents, you need to take a proper approach to defense, this can be done in several steps:

Step #1. The construction of walls greatly complicates the possibility of an attack, and watchtowers will help settlers take the most advantageous position in relation to their opponents.

Step #2. Turrets should be placed along the perimeter of the settlement, on hills, which will constantly scan the area for enemy activity. The more developed your character is, the better weapons he is able to create.

Step #3. You can place traps behind the fence so that the number of enemies already on the approach to the village decreases. They work well in narrow passages or if you know where enemies are more likely to come from. After each operation, the traps must be recharged.

Step #4. The last stage of your defense can be to provide your residents with good armor and powerful weapons, so that the enemy who penetrates the wall can receive a proper rebuff. A pistol, of course, is good, but what if the enemies come across heavy fire from a minigun or an improved laser rifle, they will remember this technique for a long time.

In addition, during an attack, the player receives a message about which settlement was raided and he can personally push back the enemy forces. Even completing one of these steps can significantly increase the settlers' chances of survival, and completing all of them will make your village invincible.

Power supply (cable pulling)

In order for the settlement to function fully, it is necessary to build generators that will provide it with uninterrupted electricity generation. It is needed for the operation of all main buildings, from the recruiting beacon to more powerful turrets.

Generators in Fallout 4 There are several types and they differ in size and amount of energy generated. The more, the more effective. But it’s not enough to just build it, you need to connect it to all structures that require electricity. This can be done using wires; stretching them is not difficult. In the construction mode, you need to approach the generator, the message “attach wire” will appear, after pressing you should connect it to pre-installed poles or connections, and then directly to devices that require current. If the building is located close to the generator, then you can do without additional connections, but do it directly.

Using electricity in Fallout 4 You can not only protect your settlement, but also illuminate buildings. To do this, in the construction mode, you can select both ordinary lamps for interior lighting of rooms, and spotlights that can illuminate the street in the dark. To prevent wires from hanging in the middle of the room, you can use an electrical box that can easily be mounted on any vertical surface.

Settlement needs

If you follow all the above points, the mood of your residents will always be excellent, and their performance will significantly improve. The general characteristics of the village can be seen by going to the workshop menu at the very top of the screen. It displays: the number of people, water, electricity and defense capabilities, as well as the limit of buildings for a given area.

But the player always has the right not to do anything from this list and just enjoy the gameplay Fallout 4, because in this game everyone will find something to occupy themselves with.

During the construction of premises for settlers in Vault 88 it will require many light sources and a huge amount of energy. Moreover, many lamps and fixtures cannot be connected directly to an electrical source. In addition for Vault-Tec Workshop You can use a new system for providing electricity through diffusers and channels.

How to provide electricity to rooms in Fallout 4: Vault-Tec

Energy is not an easy thing in Vault 88. You can build rooms, atriums, and multi-story structures inside it, but they take up an incredibly large amount of space. But at the same time, you will need to place lamps on the walls and ceilings, which cannot be connected directly to the generator, and the generators themselves take up a lot of space, it is also inconvenient to place them a lot, let alone power lines.

However, there is a way to supply electricity, although it may seem complicated. But just to show up.

The Vault-Tec Workshop add-on has new elements:

Shelter electrical boxes
Vault-Tec reactor/Vault-Tec super reactor

Any reactor is installed on the floor and is capable of providing electricity to almost all rooms of residents. But what if the rooms are not connected to each other or are located away from the reactor?

Option 1

On the menu Power -> Wiring there are new elements Tubes or power cable channels. They are attached to the walls of the home and are capable of providing electricity to a considerable area. All you need to do is place such tubes (vertical, horizontal, corner) along the entire perimeter of the atriums and connect them to the reactor on one side.

Energy dissipator. This is a universal conductor of electricity that is mounted on the roof, so it is usually not visible from below. There is a model with a light that lights up when current is supplied.

But there must be a place inside the room Shelter electrical box, otherwise the light bulbs inside will not receive energy. But the box itself will be able to take it even from the diffusers that are on the roof.

Option 2

Usage Electrical shelter boxes. On the menu Power -> Connectors and Switches New Vault boxes have appeared. The electrical box of the shelter is installed indoors and is capable of drawing energy from the outside. All these boxes can be placed on the outside and on the inside. They can replace Tubes.

Using tubes, boxes and diffuser, can be used one reactor and provide the entire shelter with electricity, even in those places where power line supports cannot be installed and their use is not possible in principle.

The general options are presented in the screenshots in this material, so the general meaning should be clear.

Do you want to electrify your community, but don’t know how to do it? Here you will find answers to the most asked questions. After this, wiring electricity will become simple entertainment for you.

How to connect electricity in Fallout 4

So, you have already learned how to build, all that remains is to improve the settlement. Devices and mechanisms require electricity to operate in Fallout 4. In order for it to appear in the town, first build a generator. The choice of generator size depends on how many devices you plan to connect to it. There are devices that consume the resource of the generator, and there are those that are not taken into account. For example, light bulbs, fans, TVs do not consume generator resources, but, say, industrial lighting consumes 1 unit of energy. Let's figure out how to run a wire from a generator in Fallout 4. To do this, while in the construction menu, go to the generator and when it lights up, press the spacebar, a wire will appear that we can stretch to the required point.

Electrification of settlements

Learning how to make electricity for settlements in Fallout 4 is easy. To do this, you will need to configure generators, power line supports, and electrical appliances. They often don’t know how to connect electricity in Fallout 4. It is connected using wires, and they only appear if you have a sufficient amount of copper.

How to conduct electricity in Fallout 4 if no wire appears when you press space? Then make sure that the item can be connected to the network.

How to install electricity in Fallout 4 if the wire is not long enough? In this case, place an intermediate support or pole.

Fallout 4 how to provide electricity to a village? To transmit energy over distances, use poles and power line supports. You can build them yourself or use existing ones. To connect you will need copper, which is used to make the wire.

How to connect electricity in Fallout 4? First, you need to decide whether or not you need additional boxes and poles. If they are not there, there will be nowhere to connect the wire from the generator.

In Fallout 4, connecting electricity occurs by connecting a generator and a power distributor such as an electrical box. All nearby devices will automatically work, even if they are not directly connected by wires.

Fallout 4 how to connect electricity to a house if it has just been built and there is nothing in it? To connect electricity to your home, build a generator, connect it using wires to an electrical box, which you install on the wall outside the house. If your house is large and there is electricity in only one part, add another box in the place where there is no light and connect it to the previous one.

Fallout 4 how to install electricity in the house? We approach the generator and, using a space bar, connect the generator to the electrical box on the wall, using the sparking wire that appears for this.

Wiring

Wiring is needed for manufacturing items that involve electricity, for repairing and modifying armor. Where can I find wiring in Fallout 4 and what things need to be disassembled for this?

It is found in electronic devices:
telephone – 2 pcs.;
tiles – 2 pcs.;
Improved guidance map – 2 pcs.;
Military microcircuit – 5 pcs.;
wire – 1 pc.;
Emergency transmitter – 1 pc.;
Switched off emergency transmitter – 1 pc.;
Touch module – 5 pcs.

You can buy from Karla in a pack of 25 pieces. You can meet her caravan in Sanctuary, or from other traders, 25, 50 pieces in a batch.
If you visited the Minutemen's castle in Fallout 4, where can you get electricity to run the transmitter? We build two medium generators right next to it and use the spacebar to connect them to the transmitter.

The question in Fallout 4 of how to connect electricity to a castle will not confuse you if you have electrified at least one house. In certain places, in construction mode, we install generators, then we place mounting boxes and switches along the walls and connect it all with wires. After this, we place lighting and electrical appliances.